Headlamp tech that doesn’t blind oncoming drivers—where is it?
Headlamp tech that doesn’t blind oncoming drivers—where is it?
The US is a bit of a backwater for automotive lighting technology.
Despite US dominance in so many different areas of technology, we're sadly somewhat of a backwater when it comes to car headlamps. It's been this way for many decades, a result of restrictive federal vehicle regulations that get updated rarely. The latest lights to try to work their way through red tape and onto the road are active-matrix LED lamps, which can shape their beams to avoid blinding oncoming drivers.
From the 1960s, Federal Motor Vehicle Safety Standards allowed for only sealed high- and low-beam headlamps, and as a result, automakers like Mercedes-Benz would sell cars with less capable lighting in North America than it offered to European customers.
A decade ago, this was still the case. In 2014, Audi tried unsuccessfully to bring its new laser high-beam technology to US roads. Developed in the racing crucible that is the 24 Hours of Le Mans, the laser lights illuminate much farther down the road than the high beams of the time, but in this case, the lighting tech had to satisfy both the National Highway Traffic Safety Administration and the Food and Drug Administration, which has regulatory oversight for any laser products.
The good news is that by 2019, laser high beams were finally an available option on US roads, albeit once the power got turned down to reduce their range.
NHTSA's opposition to advanced lighting tech is not entirely misplaced. Obviously, being able to see far down the road at night is a good thing for a driver. On the other hand, being dazzled or blinded by the bright headlights of an approaching driver is categorically not a good thing. Nor is losing your night vision to the glare of a car (it's always a pickup) behind you with too-bright lights that fill your mirrors.
This is where active-matrix LED high beams come in, which use clusters of controllable LED pixels. Think of it like a more advanced version of the "auto high beam" function found on many newer cars, which uses a car's forward-looking sensors to know when to dim the lights and when to leave the high beams on.
Here, sensor data is used much more granularly. Instead of turning off the entire high beam, the car only turns off individual pixels, so the roadway is still illuminated, but a car a few hundred feet up the road won't be.
Rather than design entirely new headlight clusters for the US, most OEMs' solution was to offer the hardware here but disable the beam-shaping function—easy to do when it's just software. But in 2022, NHTSA relented—nine years after Toyota first asked the regulator to reconsider its stance.
Oncoming drivers? I'm getting blasted by "cars" behind me. Fucking trucks or even lifted trucks with their headlights at my eye level. And it seems like lights are getting brighter as well, or people drive with their high beams on. My rearview mirror is auto dimming, which helps a lot. But since I drive the speed limit these trucks are swerving back and forth behind me, blinding me via the side mirrors.
Man we really really need restrictions on size and weight of cars. It's getting ridiculous out there.
people actually drive with their high beams on 24/7 even on lighted roads and traffic. I was in an Uber recently and the driver did this. I already drive a relatively high riding SUV and I get blinded by those lifted trucks regularly. people are insane and only care about themselves
Yep, I'm only 35 and remember when almost all drivers generally only used hibeams in situations of serious low visibility due to fog or snow or rain, or a totally unlit road at night out in the middle of no where, and where it was common courtesy to turn your hibeams off when someone is coming toward you on the other side of the road, turn em back on when they pass.
Seems like basically no one does this at all any more, barring some longhaul truckers.
Its just super brights all the time.
If you have an astigmatism, just get fucked, crash and die I guess.
Man we really really need restrictions on size and weight of cars. It's getting ridiculous out there.
There will always be actual situations where giant trucks are necessary, but they're like 0.1% of the actual giant trucks on the road.
I say require a commercial license over a certain vehicle height and/or weight (maybe with a carved out exception that it's the vehicle weight not including the lithium battery, for EVs' sake). Commercial licenses are harder to get, and much easier to lose.
I don't think they need a commercial license. Just an extra endorsement (like with motorcycles) would be enough. You want to drive a vehicle that tows? That should be an extra endorsement regardless of whether or not you're going to tow/haul anything. We could even subsidize it for farm vehicles and construction vehicles etc.
A driving factor is the US requirement to place low beams above (and outward) of high beams. Couple that with traditional design goals of "my eyes are up here" faces (see: not the juke), you get normal low beams blinding every car with lows higher than mirrors. Then couple that with the factory aiming the lights to the max heigh with an empty tank and no cargo and sending that off to the gen pop, which is clueless about the ability to aim them.
Ironically, the low/hi arrangement requirement went against the original RX350 headlight design. It caused the creation of one of the greatest dual-beam xenon projectors of all time because the original high beam location was noncompliant. It got used as a big DRL I believe. Those "rx350" projectors were very popular in the retrofit headlight community, a hobbyist group dedicated to improving lighting without blinding others
I bike at night often. Very few turn off their blinders for me. It's so bad that I have to come to a full stop until the car passes. If you have ever turned off your blinders for bikers at night: Thank you, seriously. We appreciate it more than you know.
That's the reason I think matrix lights should be outlawed. They allow plausible deniability for the driver. "oh sorry, is my matrix broken?" No, it never worked to begin with; bikes and pedestrians are blinded. Drivers on the opposite lane are blinded if there's a divider between sensor and lamp. You're illuminating the town like breaking dawn because your matrix doesn't care about sleep, either!
And to all the cyclists who use a bright led lamp on their handlebar, remember to also point them down, not straight ahead. I've been blinded as a pedestrian and a driver by cyclists who don't position their lights correctly.
As a cyclist who really tries to point their light downward to not blind others: amen.
My front light is cut off at the top like a car light. No blinding light but the road is VERY well lit ahead.
- Install bringht LED lights which make your eyes audibly scream on your bike.
- Switch it on whenever such an idiot comes towards you.
- Avoid their sweering motion of sudden blindness when they loose control over their 4-Ton Monster truck.
- ....
- Profit
Alternatively, use a welding mask when cycling at night and leave the light switched on. Avoid planes which try to land on you.
/s ... just in case
The light I use on my bike is on that I attach to the handle bar for each use, so it’s not super duper fixed - just meaning I can adjust it on the fly if I need to.
I 100% angle it up and point it right back at cats driving with their high beams on. Almost every time they turn theirs off and I lower my light back down.
I suspect a lot of them now are the automatic high beams that cars absolutely should not have.
Your low beams were fine 20 years ago. Don't create this expectation in drivers that they have to turn night into day. That only adds to the problem of asshole drivers prioritizing their ability to see over other people's ability to see. Matrix headlights are unnecessary and create orders of magnitude more light pollution
Blinding headlights are due to poorly aligned low beams, too bright LED headlights, bigger cars with their headlights mounted higher and higher. So the solutions are: low beam alignment that can't be made to blind you by the driver, regulation on luminosity and color spectrum of lights, stop financial incentives to make vehicles large, heavier, deadlier.
Low beams were fine until idiots started putting them four feet above the ground. Now they're in the eyes of anyone not driving a monster truck.
Except the lower ones are still there. There's a set of lights every 18 inches. Why are there three sets of lights on some of these trucks?
Nobody wants it, they just want brighter lights for themselves to compensate for being blinded by the brighter lights of others, but actually to retaliate, nobody can have brighter brights than me!
We'd need regulations for this, which we'd never get, especially after the Chevron doctrine was reversed.
This exactly. No one would want to pay for in Their vehicles because it doesn’t affect them and would cost extra. Need regulations for this to be implemented.
Also is this even a big safety risk? I understand it’s annoying but does it actually cause accidents?
I know it's the biggest annoyance I get on the road and the reason I try not to drive at night. And I live in Europe! When I drive at night in north America it's much worse.
M. A. D.
I just want to see the day where as a pedestrian I don’t feel like my retinas are fried every time a car passes at night or has their brights on during the day (ugh). I know it is wishful thinking because apparently politicians don’t give a shit about pedestrians (or cyclists).
Controversial, but auto-highbeams should never have existed. Turning on high beams should always be manually triggered by the driver.
Auto high beams have done a pretty OK job at detecting oncoming cars, in my experience. People blasting every fucking house in the neighborhood with high beams at 25mph, on the other hand, is where my ange lies. High beams are for high speed or aggressive slop change, not low speeds.
The only automatic thing I want in any car is the transmission. Automatic lights have resulted in morons driving without their taillights on.
Whether it's cars or computers, when things get made "easier" they just let people be dumber.
Nor is losing your night vision to the glare of a car (it's always a pickup) behind you with too-bright lights that fill your mirrors.
It really fucking is. Nothing is a bigger red flag to me than a pickup. 98% of pickup drivers are assholes.
My catchphrase when driving has become "It's always a fucking pickup"
My personal one is "Dumb fuck in a truck."
It seems to me like we didn't have this problem twenty years ago. If blinding LEDs are the problem, why not just not allow them anymore for headlights? It takes 5 seconds to pop in a new incandescent headlight on cars that have them, and well made ones can last 20+ years depending on the construction. Visibility is good and equivalent to some LEDs with higher end lamps, and it doesn't create a superbly unnatural light that impairs the other drivers, pedestrians, or nature. It would also reduce light pollution.
On very rare occasion, the progressive step forward, actually looks a lot like the road backwards. It would take a long time to implement, but anything worth doing is worth taking the time to do it right.
Auto sensing technology is going to be more of a glaring headache in 20 years, when you have half of the cars with failing sensors and everyone getting blinded even worse. Adaptive Driving Beams (ADB) are not a solution, it does not properly address the issues of glare, and it will likely only make the problem worse by further removing human interaction from headlight controls.
Visibility is good and equivalent to some LEDs with higher end lamps
No. Not even close. LEDs are blinding because they have such high output. That high output is what makes things visible.
That's what high beams are for... Cars don't need to light the dark side of the moon, drivers only need to see the roadway in front of them. Both provide ample illumination, it's just one allows you to see the color of a zit on a mouse 3 miles away, which is entirely not necessary for safe night driving.
And I was saying that some higher end incandescent lamps are equivalent to some LEDs. I know there are LEDs that far exceed the lumens of traditional lamps.
Nah. The issue is way more complex than that and begins in proper training for drivers and ends in some proper road worthy inspections of vehicles so that they at least have their lights correctly aligned and aimed.
There are no such issues in Europe. Sure, you get the occasional double blink from matrix led system, but I'd take those systems any day of the week over some who just forgot to turn off their high beams or has their lights aimed incorrectly
All you need is to have all car's lights be horizontally polarized and then all windshields have a vertical polarizer there I've fixed the problem.
Now basically the light would come out and only vertical polarizer light or scattered light would be accepted by everyone's windshields. If you've ever played with this setup on your own using a flashlight and polarizer shades, the color of almost all objects look so cool.
Fuck cyclists, pedestrians and residents, I guess.
No, everyone can wear polarizer gear and benefit. But if they didn't, it would be just like now.
The ol' DMG Gameboy tech.
I'd just go for a "feature" that disables the on/off function (leaving the momentary function alone) of the hi-beam when a sensor/s detects light above a certain luminosity. I also think an extra cost to the registration could be tacked on for vehicles that are lifted or otherwise have headlights above a certain height that would scale with the said height.
That's what auto-high-beams do, but it's always a little too slow.
I'm curious if the problem is how bright LED lights are or something else. I recently bought a car and it has an automatic brights option. Basically, it switched on the brights automatically for some situations. I turned it off because I felt it was turning them on when I didn't need them.
My auto bright feature barely ever turns them on for more than a couple of seconds since it seems to be triggered off by reflective signs. So on empty roads with signage I have to turn them on manually if I don't want them to flick to dim constantly.
Seems like tech that should be a lot more reliable by now, instead of the two of us having opposite experiences.
I think it’s the cutoff. My Bronco LEDs don’t seem to bother people.
My stock Toyota 86 LEDs had an extreme cutoff between the area it lit up and where it didn’t. Even though it was lower to the ground and had a shorter throw, people would flash me all the time.
Can anyone explain this part to me, like I’m five?
From the 1960s, Federal Motor Vehicle Safety Standards allowed for only sealed high- and low-beam headlamps, and as a result, automakers like Mercedes-Benz would sell cars with less capable lighting in North America than it offered to European customers.
Sealed beam headlights are the whole thing, lens, reflector, bulb all in one assembly. You don’t replace the bulb with these, you replace the entire light. Think old cars/trucks when everything had standardized round glass headlights. Not unique designs per model.
Because Mercedes Benz couldn’t use their fancy euro headlights for cars in the US, they had to use the standardized sealed beam lights, which were not as powerful.
Meaning it legally must be a sealed unit with only 2 states, high and low. In Europe and/or other places there may be multiple angle states and/or strip headlights or other stuff based on their specific regulations. The result is that the efficacy of US headlight systems have a hard upper bound for how effective they can be, based on what was practical to do in the 60s.
It's because GM has deep pockets and doesn't want to pay one of their competitors a licensing fee to stay competitive.
That is quite a complex task. Being able to focus the beam in a certain direction is one thing. And it is the easier part.
But where should it focus to? You cannot just base the up/down position of the head and therefore the lamp as such, you also need to know where the wearer is looking left or right of the direction of travel. Just imagine you are sitting in a car and a guy with such a headlamp is coming in your direction. All this biker needs to do is just turn his head and look at you for some reason, and blam! You are staring right into a blazing array of LEDs.
More and more I am tempted to buy one of those 36,000 lumen flashlights and shine it at people who refuse to remove their high beams. You can tell when it’s just a tall truck and some asshole with high beams.
While my car was being repaired after a crash, the insurance company gave me a rental to use for the duration. The rental company only had a Land Rover Evoque (or something), and that car had the fancy led matrix lights. It was amazing! You could actually see the light being "shaped" on the road in front, going around incoming traffic, it was constantly moving. To me it was a bit distracting though...
because few people in this society spend money on something that makes other people's lives easier.
Dont stare into the lights of oncoming traffic. I know it's bright and all but just dont stare directly at them at that'll solve 90% of the problem.
It's existed for decades, until recently it was a non issue
Not sure what you mean. Blinding headlights is definitely worse in the last two decades
This could be really simple to achieve with polarisation https://en.m.wikipedia.org/wiki/Polarizer
A polarised filter on the headlight with an other one on the windshield. Reflected light would be non polarised, thus not filtered.
I have my doubts about this being easy, since the other necessary function of headlights is being seen.
It's on my new VW ID.7 in Europe at least. Drove during dark for the first time a few weeks ago and it was pretty amazing seeing the matrix headlights "sculpt" the light around other cars.
Distracting in the beginning, but you get used to it.
People are getting older or in poor health and they can't see when they're driving at night. It's terrifying how many people should probably stop driving once the sun goes down
That definitely plays a part, but there are other bits, too.
Old sealed beam lamps simply weren't as bright as halogens or LEDs (or Xenons, for that brief moment in automotive lighting history). Sealed beams didn't throw out as pure a white light, either, and they were more likely to become badly aimed. Sealed beam reflectors were all the same, no matter what car you put them on; automakers could adjust composite headlights to have whatever beam shape they wanted. All together, you could not see as far when using sealed beams in comparison to newer bulb technologies.
Back in the mid-1980s, when composite headlights were becoming more common on new cars, highway speeds were simply not as fast. Anecdotally, going 75MPH on the highways in and around Chicago was screaming fast in the 80s. Today, 75MPH on those same highways is slow. Modern cars are simply more capable of safely driving at high speeds, and part of that is because modern headlights are designed to throw whiter light farther. Headlights are brighter.
Throw some supermassive trucks and SUVs into the mix, where their OEM positioned headlights are higher off the ground, and many of them have big tires or lift kits making that even worse (and where exactly zero people who lift their vehicles also reaim the headlights) - if you're in a compact or midsize sedan, well, fuck you.