What purpose would this be used for?
What purpose would this be used for?
I found it at the dollar store.
What purpose would this be used for?
I found it at the dollar store.
If you think about it, this is the USB equivalent of a double ended dildo
does this mean there's also double ended flesh lights?
Isn't that the nickname of your mum?
It turn@ a usb extension cable into a regular usb
I guess that could be a use case?
Or turn 2 extension cords into a long one.
But a serious answer is that these are sometimes sold in a kit of adapters that would let you change the head. Most kits like used a normal cord as the base cord, but some used USB extension cords as the base cord. So this is meant to be a replacement part, not useful in its own right.
Such A-to-A adaptors and cables always have been prohibited by the USB spec, but people built them anyway. A common usecase for "illegal" A-A cables i remember was connecting PCIe cards (especially GPUs and mining cards) externally to riser sockets.
I have an external 3,5“ HDD enclosure that needs a male to male USB 3.0 A cable to plug into a PC. Still wondering, why they didn’t use B…
I bought a breadboard power supply and the options to feed it power are a barrel jack and usb-a. Considering the size of the thing mini or micro would have made way more sense.
I have a similar caddy. Many years old now. The connection to the host computer is a USB-A female, so connecting it requires a male to male cable.
I’ve used them for extension, as it allows you to attach a second, regular USB cable to it.
Well, what do you mean by "regular"? The cable would need to be female on at least one end, which I usually see in... USB extension cables.
Not that you probably need to know this, but for some other stranger: there's a max functional length to USB cables. At work I remember pulling my hair out troubleshooting a printer until we swapped cables for something shorter.
And that max length goes down with each coupling.
We have smart boards in most classrooms, but in an entire wing of my department the smart board doesn't work. Reason? When we built the wing, 8 or 10 years ago, the installers fitted their own low grade plugs on the USB connection for the boards, before figuring out that they snipped the cables too short. Instead of running new cabling the installers then introduced another extension.
Nobody cared to check it out before accepting delivery and my complaints went unheard by management, until it was too late to RMA it.
That said, there are "active" USB extension cables which draw current from the power lines and use it to boost the signal along the data lines
Meanwhile I have 25ft cables running my large format vinyl printers lol
Sometimes you have a female to female cable.
You ever watch Requiem For A Dream?
ASSSSSSS TO ASSSSSSSS
LUSBian sex obviously!
I dunno but it bothers me how much plastic wrapping that fucking thing apparently needs.
To connect two USB-A ports.
Basically the same as a USB-A to USB-A cable, just really short.
USB-A to USB-A cables do not exist, the USB standard does not allow them, if you have a cable with two USB-A connectors then it’s not actually a certified USB cable. The same goes for USB extension cables and this adapter. Note how there isn’t a ‘USB certified’ logo on the package.
USB-A to USB-A cables do not exist
wtf are you talking about, of course they do.
The cables exist; they just don't follow the standard. I've used them when developing consumer electronics: the host controller on the device switches to device mode in the bootloader, allowing a host machine to connect and debug/flash the device.
USB-A to USB-A doesn't exist
looks at old charger from an American device*
HOLY SHIT A CRYPTID CALL SCP
USB-A to USB-A cables do exist.
I have seen many (very cheap) peripherals use USB-A sockets. I figure those sockets must be a few cents cheaper than alternatives.
They do exist, despite the USB standards not allowing them
See: cheapo video capture card for work, other side is just HDMI-IN and OUT
They shouldn't exist but don't mean they don't when you get the cheapest little devices you can find
It’s not hard to imagine a product that would require one, though. It’s how every phone charging cable works, just with a different size male USB on one end.
Ass-to-ass.
Docking
I used to have a portable hard drive that had a usb-A/ e-sata hybrid connector and I had to use a USB A to A cable (or e-data) to use it.
It's an Usb-A gender changer. It's not that useful but you could use it to turn an otg adapter (female usb-a to male usb-c) into a regular usb-c cable. I'd rather buy a usb-c cable though.
Causing fires
Many cheapo sata connectors need a cable like this(I use a male A to female micro b and then a female micro b to male A, it gets the job done)
But connector, idk
I actually have a APC UPS at work that uses a USB-A to USB-A cable. You can look up the cable online, it's part number 940-0504. I was surprised APC used such a cable. I think if you tried to do something dumb like connect two PCs together with it, one of the USB ports would fry.
The way these are called male and female has always been so wild
It‘s a pretty good metaphor I‘d say and less bland than calling them plug and socket.
Don't know what to tell you, people just kinda tend to be horny.
Not one that short but I do have A to A cord like that in use. In my case it's with a KVM that I lost and AC adapter for but found that if I plugged in to one of the rear console connections it could get it to power on from the USB device. Cable it to a USB charging port on the front of one of the UPS and away it goes.
I would definitely find a couple use cases for these
Angering the USB-IF
So your pets can't chew the hard-disk cables.
Unless you have a pet rabbit.
Finally! USB Direct Connect!
I have a cheap HDMI capture device that takes in video input, exposes it to the computer as a regular webcam, and then outputs it back to HDMI. It gets the job done.
It uses an USB male to male for power, and a regular one for data.
That said, not sure how a short one like that would help.
I had an old Medion digital camera that used USB-A - USB-A cable for synching with PC.
This could be a shorter version of it, tho idk why would anyone use this for thus purpose, would be awkward
So you have 2 USBC devices you want to connect together, a laptop and a phone for example, but for some reason you can't find your USBC to USBC cable but you do have 2 USBC to USBA cables.
Well by breaking the USB specifications you can connect the 2 cables together to make a janky USBC to USBC cable.
Alternatively you can get single circuit boards with USBA ports on them and you can use this jank of an adaptor to link them together.
Ass to ass
The stars of username, comment and upvotes
I want to upvote but I cant.