Saw this going to a friend’s house- they bagged the fire hydrants….one thought was snow; but this is the first year apparently. And snow has been a mild issue this year compared to most.
Cheaper to do bags than re-paint off-schedule. Usually cities have a schedule for maintenance, and the bag, in this case, is preventative for rust without being off-schedule for painting.
Salt resistant paint is industrial, and it’s expensive. Depending on the product, it can also be a two part system and need special preparation. And by expensive, I mean it can cost over a hundred dollars per gallon, if you aren’t getting a deal on it. That’s a big investment for a smaller town.
Paint gets scratches, especially where things turn and rub against each other. You don't want the turning bits becoming seized and finding out at the worst time
I believe there's some logic in alternating patterns being more attention-grabbing to our brains, which is why you usually see stripes on anything you need to be cautious around.
The pole isn't for locating the hydrant, per se, as much as it is for avoiding the hydrant. It's so you don't drive into it if it's covered in snow.
Possibly out of service. There are dedicated high visibility bags for this purpose but if whoever did this didn’t have one, this looks like a stopgap to help make it more obvious.
It is amazing how many hyadrants I've suddenly noticed on the drive back. (and there were several new-looking ones that weren't bagged. Or maybe the bag came off. Apparently it happened in the fall.)
I imagine out east, in the Maritimes, they'd have to put marker-poles on the things, because they sometimes get 5' of snow in a single onslaught, but ..
.. it simply isn't something I'd ever heard-of.
Our fire-departments deal with the snow & ice every ( normal, not now ) winter.
Isn't the street that concrete area from where the picture was taken? So if a snow plough comes to remove the snow, it essentially would burry the hydrant.
Related question. Why are north American hydrants all of the "stick up out of the ground as a permanent fixture" type, rather than the more discreet and less likely to be damaged "pipe fitting concealed beneath a removable plate" type?
Probably because it’s still liable to be damaged (especially by freeze/thaw cycles,), the plate is liable to be lost, it’s harder to find- especially under a foot of snow-