YSK that hand sewing is a stupid cheap hobby to get into and reduces your impact on the environment

PLEASE DISREGARD THE PREVIOUS POST, NORMAL SIZED PEOPLE HAVE PLENTY OF CLOTHING OPTIONS. LEAVE THE ODD SIZED CLOTHING FOR ODD SIZED PEOPLE

Very cool.

Got any plans for this coming Halloween?

Don't forget about the serger.

Seconding someone's advice that kits are a bit rubbish. The only things you need are needle and thread. Start with a multi pack of needles, and observe how they're different. Different needles may differ by: the thickness of the needle; whether the tip is sharp or blunt; how large the eye of the needle is; how long the needle is. Different needles will have different roles, but it's so easy to get bogged down in complexity, so just get an assortment and discover as you go. Part of learning is building tacit knowledge around what the right tool for the job is, so just give it a try and feel free to try other needles to see how they feel. Personal preference matters..

My main advice on hand sewing needles is to invest in high quality ones, because they're much nicer to use and last longer. For perspective on what counts as "high quality", my current ones that are my favourite cost me £4.20 for a pack of 6. That's expensive compared to a supermarket multi pack, but not excessively so. These ones were particularly fancy, by my standards (Clover Black Gold), but they're a useful benchmark as being about as fancy as you can really get. John James is another good brand. If these aren't readily available where you are, don't sweat it — just use this as a benchmark to see what the rough equivalent is where you are.

A pin cushion is useful for storing needles temporarily, but you don't need to buy this. You can make one as an early project with some small swatches of fabric and some scrap paper stuffing.

I strongly recommend a thimble for anyone who is going to do significant amounts of hand sewing, because it makes it much easier to build a rhythm and sew neat and fast. It feels clunky at first, but once you practice, it makes things far quicker and easier. Unfortunately, most people's experience of thimbles is of ill-fitting ones that probably came in some kit. You need one that fits comfortably on your middle finger without falling off or squeezing too right. A simple metal thimble will do, and they're cheap, but it can be a faff to find the right size. The sizing is sort of standardized, and usually printed/engraved/debossed on the thimble, so you can use that to ballpark if you have some ill-fitting thimbles around. Otherwise, it's best to go to a craft store and try poking your finger in some thimbles to find one that fits.

I don't have good recommendations about thread. I got started using generic machine sewing thread, which you're not meant to do, because it's worse and harder to use. I find it hard to tell though, because by the time that I got specific hand sewing thread, I had enough skill that I had my own snobbish preferences and specific projects requirements. You don't need a multipack of thread though, because that'll be more likely to be crappy. Pick a colour that matches most of the stuff you wear/will be repairing (for me, it's black). Also get some thread in a contrasting colour, because sometimes that's useful (such as for temporary lines of stitching). You probably want some cotton thread, and also some polyester thread. In general, repair like with like: so polyester thread for synthetics, and cotton thread for cotton or other naturals. Beeswax can be nice for reducing the friction of the thread, but that's not super necessary.

I worry that my advice may overcomplicate things, when that's the opposite of what I want to convey. If there's any recommendation I could give you, it's to just get something and start. Hell, if you feel overwhelmed by how granular this is and are at risk of not diving in, then go for a kit if it helps — just don't spend too much and know that the lesser quality will give you a worse experience. However, the most important thing is to just get started. You can upgrade your stuff or buy specifics as and when you need them, or you feel you've outgrown your existing tools.

You will botch repairs and need to redo them. Sometimes you will make it worse than what you started with, but that's part of learning. However, the sooner that you start to tackle the simpler repairs, the sooner you'll have the proficiency to be making all sorts of repairs and alterations. I give you this advice as someone who accidentally became proficient in sewing: I dove in and spent a long time being mediocre, and I still feel mediocre at it, but people regard me as being quite skilled. There's no cheat code, but to take at crack at it.

I'm 33 and I have been doing minor repairs since I can remember. Sewing buttons on or holes shut. Or making tiny clothes for barbies, looked awful, but worked. There are special ways of hand stitches for different purposes, but in most cases it's a trial and error approach that in 90% of cases won't end in "error". You'll figure out what feels better (like one yarn or double yarn) very fast.

But only at age 32 I invested in a cheap seam ripper. It always seemed excessive since you can basically just use sharp little scissors for that. I was wrong. I fucking love my seam ripper and I use it as a scissor now. This is so satisfying I would never ever let anyone rip any seam open for me. That's the orgasm of sewing.

Also, you might want to use a threading aid (edit: is it called a needle threader?). Some thread is just a bitch.

Little side note: when choosing a thread to repair, try to go muted. If you have a green piece of clothing and a light green, dark green, and grey thread, very likely the grey thread will be the least noticeable, unless the green is the same shade. If in doubt go darker. For white thread I recommend going off white - unless you have a lot of white clothes, most of white stuff is off white (i.e. not crisp paper white). Some people say 100% cotton thread breaks easier than blend or polyester. So far I haven't had any bad experience with cotton threats though.

Needle and thread. Maybe a seam ripper. No kit required.

You can cut decals out of t-shirts and use them for appliqué!

I have always wanted to learn to knit, how cool would it be to make sweaters?!

I thought that every pack of needles came with a needle threader, which looks like a diamond shaped metal wire and a little part that you hold. That already is a big help.