You know, I used to do this as a teenager, when cleaning my bearings with acetone, and I recall my family needing to get the sink repaired due to leakages getting quite severe at times.
Only through this post have I come to realise, 20 years later, that I was most likely at fault for the issue.
I mean I'm still not going to admit it to anyone, but it's good to know and stuff.Except admitting it to 50,000 lemmy users, haha. No worries, I didn't know acetone ruins pvc until this post either.
Your secret is safe with us Jaden
That's just the natural aging process. Plumbing just gets saggy and wrinkly. Ask any man over 50.
Y'all have a sink in your fume hood? We just had waste bottles.
Cup sinks in fume hoods used to be more common, but as a lab planner they are pretty rare requests nowadays. If I had to guess, it's probably to do with the move away from central acid-waste neutralization systems towards procedural controls dictating neutralization/dilution prior to disposal.
A lab planner! That's one of those cool (sounding at least) jobs that are obvious when you think about it but I've just never thought about it.
Definitely piqued my curiosity though. How much of your work is designing new labs vs retrofitting existing ones, how much travel is involved / how much area do you cover (the question there is really about how many labs exist needing such services), and what are any weird or surprising elements of your job?!
A lot of ours has sinks, this wasn't at mine though. :)
I spent a bunch of time in art classes and learned more practical chemical safety and disposal than my actual chemistry classes.
This is so irresponsible, everyone knows you pour it out outside.
into the gravel filled used oil pit?
Finally, an educated person up to date on the latest in popular science.
My favorite overheard undergrad story:
I was walking past the lecture hall right after an organic chemistry midterm, and there was a cluster of 4-5 students talking about the exam. One asked about question 8b, and another one said "you're not supposed to mix nitric acid and ethanol, that makes TNT, right?" I had to stifle a chuckle as I walked by.
So close, and yet so far! Nitrated acetone is explosive, and TNT (trinitrotoluene) is also made with nitric acid, but toluene is a much more complex molecule than acetone. If those undergrads could figure out how to turn acetone into TNT efficiently, they'd get a Nobel!
If those undergrads could figure out how to turn acetone into TNT...
sounds like they need to a
cetone for their sinsI fondly remember my organic chemistry lab professor giving us all a lecture that was something like this:
"I see that you children have learned how good acetone is at cleaning glassware. And you are correct: it is excellent. However, you cannot pour it down the sink and we have to pay for hazardous waste disposal. So use soap, water, and elbow grease instead."
Smelling it untill it's totally evaporated. Even if I much prefer isopropyl alcohol.
What is the proper disposal method?
Wick it with some paper towels and let it evaporate.
Acetone evaporates quickly. You just let it sit for a minute and it'll dispose of itself
so just inhale it all... ok
Yeah, I don't work in a lab, but if I clean something in the shop with Acetone, I leave the rag to dry on the side of the trash can. If I think it's a lot, I'll put it outside to evaporate or burn it.
I did a couple of times pour acetone down the drain but I did run water at full blast at the same time to wash it down immediately. Guess Im slightly smarter then undergrads.
the ol' dilute down the chute
EHS would raise hell if they caught us putting waste solvent in anything but a hazardous waste container...
Insane motherfuckers: "Pour the acetone in my mouth!"
Whichever one has the post polystyrene in it, right?
I fought hard to get a solvent extractor at my work. 11k paid for it's self in no time and almost no chemical disposal fees.
How else am I supposed to get rid of the agar huh?
