Error persists on entire layer where a new retraction pattern is used, therefore it is very unlikely to be filament humidity or a gcode issue, but filament settings.
What is your retraction length and speed? Do a cold pull to rule out debris. Reduce your retraction until stringing occures, observe if the error repeats. Temperature could be playing a role, but if your layer adhesion is up to expectations, I wouldn't change. Also observe your nozzle and make sure it's taught, I've been surprised how fast some of my brass nozzles have worn out even with non-abrasives, and causes a similar symptom of randomhish failures, especially if loose.
PS: sometimes a couple cold pulls are needed and try to hit different temps when you pull. I've noticed since PETG doesnt stick to PLA, to use PLA as a cold pull you actually need it warm enough that the PETG bits will flake off the inside
Love me some quick swaps, I'll probably be checking one out eventually. I like Prusa's mozzle design, but they're flippin expensive for hardened, and torquing the adapter to a standard mozzle has been a certified PITA
Is the nozzle change proceedure as intensive as I hear? I've got a prusa mini and xl, as well as some modded ender 5 and 3, but I'm brand agnostic in expanding my fleet
I sometimes feel like I toe the line in conversation of being anti-medication but that is not my intention ever.
However, with testament of my mother who has worked at a number of hospitals, there are shit doctors. She keeps a list of doctors she's assisted that she would never want to be worked on by, and that's really freaky to me. Its a slippery slope to think you know better than doctors as a whole.. but with some doctors you just may, and it really may save you a lot of suffering.
Mfers put me on gabapentin for my then undiagnosed scoliosis, the plan was to ramp me up to "hopefully" null my pain. I went into a irrational panic that I had rabies, among other things, and certainly shouldn't drive when my eyes wouldn't stay still. I got myself into physical therapy and that turned out to be all I needed.
In a way, isn't this just saying windows 11 is not ready as a replacement? Because fuck me my work laptop drives me nutty, IT hasn't locked down all the popups and I can't fix it withut IT..
I don't fucking get it. I seriously fail to see how past events have lead us to be so complacent. I just want an answer but I know we won't ever get a good one. A single scandal used to have the power to make an official resign, how the hell have we gotten here?
Ive had PETG sitting in my 40% humidity basement with no issues, I think thats a partial clog from retraction. If you have a direct drive try 1-2mm of retract, 3-4 for bowden. This will ooze more, but that's the tradeoff
Error persists on entire layer where a new retraction pattern is used, therefore it is very unlikely to be filament humidity or a gcode issue, but filament settings.
What is your retraction length and speed? Do a cold pull to rule out debris. Reduce your retraction until stringing occures, observe if the error repeats. Temperature could be playing a role, but if your layer adhesion is up to expectations, I wouldn't change. Also observe your nozzle and make sure it's taught, I've been surprised how fast some of my brass nozzles have worn out even with non-abrasives, and causes a similar symptom of randomhish failures, especially if loose.
PS: sometimes a couple cold pulls are needed and try to hit different temps when you pull. I've noticed since PETG doesnt stick to PLA, to use PLA as a cold pull you actually need it warm enough that the PETG bits will flake off the inside