SLPT: If you buy a new clock or appliance, wait until noon to plug it in so you don't have to bother setting the time.
SLPT: If you buy a new clock or appliance, wait until noon to plug it in so you don't have to bother setting the time.
SLPT: If you buy a new clock or appliance, wait until noon to plug it in so you don't have to bother setting the time.
House came with a builtin over/microwave combo.
Ohh wifi option... FUCK THAT... NO FUCKING WAY I'LL ADD THIS POS TO MY WIFI
Clock is WAY wrong, scroll through settings and update it to the second.
Next day, Clock is off by 1m... maybe I didn't do it right
Next day, Clock is off by 2m
Next day, 3 minutes, jesus that's a lot of drift.
OK fuck this thing, go through settings to turn the clock off.
THERE IS NO SETTING FOR THAT
So I can:
A. Leave the clock ever wrong where it'll be right like once ever couple months
B. Set the clock every couple days
C. Create a internet only + isolation VLAN and put this POS into it.
Simple fix: use a strip of electrical tape over your eyes
that's the REAL slpt
I wonder if the clock is intentionally that bad as a way to annoy its victims users into giving it an internet connection
it might be, but the interface is also slow as balls
First you hit microwave (because it operates both the mirowave AND the oven
The chime is instant but the menu load, that takes a good 700 ms
then you press cook, there's a menu of 4 items which are all just cook with extra steps. that's another 700ms and a 50% chance of not registering your click.
you get a horizontal two line number pad 1-5, 6-0 with a little hit box in the lower left for power
you enter in 90 for seconds, and click power (optional)
i shit you now, power is a scrolling slider, you swipe left and right to up up and down by 10%
micro->cook->9 0 -> power -> swipe90, ->swipe 80, swipe 70, swipe 60, swipe 50, swipe 40 -> next -> start
The other menus are worse, it starts asking you questions about the thing it's defrosting, satisfying some form of flow chart inside to do a lookup of power and time.
the only good thing I can say about it, it' has a proper popcorn button that stops early when the corn stops popping. It's never burned a bag or left extra kernels.
D. Tape a small mirror to the clock display, then set up a working clock across from it. Then learn to read mirrored numbers. Easy.
The clock is also the touchscreen that operates the microwave. I could maybe put a flap of black cloth over the screen and only lift it when I wanted to use it.
it's really horrible.
Side note, wonder if anyone makes a clockwork that goes backward.
If by some miracle the clock is not also the timer display, you could use the Klick&Klack method.
Why would you do it at noon? It should be midnight.
Edit: duh, I realise now it's a shitty LPT.
I don't understand why this attitude persists now that VCRs are gone. If you've never set up the time and record time on a 6digit LCD, then you don't know the struggle.
This is the best slpt I've ever seen.
Trip your main breaker, and turn it back on at 11:59
Plug it in?
12:00 and blinking 12:00 are not the same. :)
Just close your eyes every half-second
Oh so you're one of those ppl obsessed with frame rates
Blinking is superior. Without blinking, you could be staring for up to a minute at the clock unsure if time is moving or even if it exists. Theblink immediately tells you that time is working.
Blinking uses half the power too.
Tip also works for car battery / clock.