I initially tried with those capacitors but decided to also try without them - perhaps you're right and I broke my LDOs by doing that :/
I tried with the resistor, same thing, 0V. I made two images showing the measurements
Yes, that's what I did and what it shows. I also attached a picture of my test setup just in case I did something wrong there
Yes, I measured across ground and Vin and it shows ~4V. Across ground and Vout 0V.
I'm trying to build a esp8266 weather station and got some MCP1700-3302E to power the esp8266 from a lipo. But when I connect the lipo to the MCP1700 (looking at it flat spot at the front, ground left, Vin in the middle and Vout on the right) I get no output at Vout. I googled and could not find anything. I tested 5 different ones and it's the same for all of them. Could I just have a batch of broken ones? Edit: attached a picture of my very simple test setup Edit 2: I just connected three lipo directly to Vin, that seems to work without any problems (at least for a few days now)
