Skip Navigation
What is the difference between Japanese quotes?
  • Here you go noobie:

    https://www.japanesewithanime.com/2017/05/quotation-marks-japanese.html?m=1

    Nested Quotations

    Like in English, when a quote contains a quote within, the quotation marks alternative. Typically the single quotation marks (「」) are used for the outermost quote, and the innermost has double quotation marks (『』).

    Hanako wa "hai" to itta 花子は「はい」と言った Hanako said "yes." Tarou wa "Hanako wa 'hai' to itta" to itta 太郎は「花子は『はい』と言った」と言った Tarou said: "Hanako said: 'yes.'"

  • Phone Recommendation for Cancer Patient
  • My first advice would be to ditch those friends of yours as they're a bad influence. However if you're afraid of letting go please have a look at these options:

    https://www.standard.co.uk/shopping/esbest/health-fitness/accessories/gadgets/best-thermal-phone-cases-heat-protection-b1088135.html#

    It's a UK link but the search on your local Amazon, reviews or other techsites might help you find a solution for your problem.

    I haven't used a dedicated cool case myself since I was too cool for cool cases so i can't help you on the review or experience part.

    On sites like PhoneArena there's also reviews which may help you choose your next futuristic device.

    However, I hope I didn't offend you in any way. That's just me being a smart ass jerk sometimes.

  • Salman I like him
  • For those who don't understand it's Arabic:

    As-salamu alaykum (Arabic: ٱلسَّلَامُ عَلَيْكُمْ, as-salāmu ʿalaykum, Arabic: [as.sa.laː.mu ʕa.laj.kum] (listen)), also written salamun alaykum and typically rendered in English as salam alaykum, is a greeting in Arabic that means 'Peace be upon you'. The salām (سَلَام, meaning 'peace') has become a religious salutation for Muslims[1][2] worldwide when greeting each other, though its use as a greeting pre-dates Islam, and is also common among Arabic speakers of other religions (such as Arab Christians and Mizrahi Jews).

    Sauce: wiki

  • After a move, my wife's computer has terrible internet speeds (Windows 10)
  • Haven't used Windows in a while but it could be configuration software related.

    Some tryouts

    • Try using a bootable 'clean' windows or Linux version to compare.
    • Make sure network isn't limited by metered data
    • Try different wifi bands. Some cards don't work well with ranges of frequency bands.
    • Hardware compare your network card to hers on a comparison website
    • google her network card to find out restrictions on network

    It looks as if your wifi routers is just fine. Its as if communication back and forth is not great enough hence my tryout options.

    Good luck!

  • Secret Exit
  • One interesting item of note in the canyon is the existence of this “door to nowhere” over looking Ring Bolt Pool and the base of Cleveland Dam. This door protects the end of a tunnel built during the construction of Cleveland Dam in the 1950’s. Originally there was a ladder from the base of the canyon up to this door to allow access for workers. Now it is an area where the dam and canyon can be visually inspected as required.

    Sauce

  • Google is preparing to kill Waze
  • Read the article... It's transitioning to a different ad team, so cost reduction when only one system for ads is needed. I don't think this will be cancelled since their community is actively keeping it alive.

  • Tip: correcting energy dashboard

    I noticed in the past month that my daily energy production doubled in size. The problem is persistent but doesn't show up on a daily basis. I don't have a definite fix but can however fix these weird spikes manually.

    I decided to post to show how to correct these spikes when they occur.

    Let's say there's a weird spike in the evening which adds 100kWh to my Solis Energy Today kWh. This would look like this: !

    The problem is located on a sensor which reports the daily kWh total. In this case it's Solis.

    My next step would be to go to the settings menu and look for Development settings > Statistics Tool and look for the sensor which has the problem.

    Then it's a search to the right moment on which the error occurs. In this case see: !

    Now just adjust the incorrect value to the desired one. In my case this is 0. Then just reload the energy dashboard and the error won't show.

    Good luck for whoever gets into the same boat.

    1
    2023-06-14 Latest release 2023.6.2
    www.home-assistant.io 2023.6: Network storage, favorite light colors, new integrations dashboard

    Add and use network storage, the integrations dashboard got a revamp, add your favorite colors to your lights, copy & paste support for automations, blazing speed through Python 3.11, and Matter an...

    2023.6: Network storage, favorite light colors, new integrations dashboard

    Release 2023.6.2 - June 14

    Change pyoppleio to pyoppleio-legacy (@tinysnake - #88050) (opple docs) Fix issue with Insteon linked devices maintaining current state (@teharris1 - #94286) (insteon docs) Bump elkm1-lib to 2.2.5 (@gwww - #94296) (elkm1 docs) Bump pylitterbot to 2023.4.2 (@natekspencer - #94301) (litterrobot docs) Upgrade sisyphus-control to 3.1.3 (@jkeljo - #94310) (sisyphus docs) fix: electrasmart - cast temperature to int in set_temperature (@jafar-atili - #94368) (electrasmart docs) Fix dep noaa-coops for noaa_tides (@jbouwh - #94370) (noaa_tides docs) Fix deprecated asyncio.wait use with coroutines (@syssi - #94371) (xiaomi_miio docs) Update xknxproject to 3.1.1 (@farmio - #94375) (knx docs) Re-add event listeners after Z-Wave server disconnection (@raman325 - #94383) (zwave_js docs) Fix ZHA binding api to actually return responses (@jasonkuster - #94388) (zha docs) Abort youtube configuration if user has no channel (@joostlek - #94402) (youtube docs) Update knx-frontend to 2023.6.9.195839 (@farmio - #94404) (knx docs) Bump unifiprotect to 4.10.3 (@AngellusMortis - #94416) (unifiprotect docs) Fix: Xiaomi Miio Fan, delay off countdown unit conversion (@golles - #94428) (xiaomi_miio docs) Add unit inference for Amps and VA in APCUPSD integration (@yuxincs - #94431) (apcupsd docs) Fix manual update for Command Line (@gjohansson-ST - #94433) (command_line docs) Fix reload service in Command Line (@gjohansson-ST - #94436) (command_line docs) Set default value for endpoint in zwave device automations (@raman325 - #94445) (zwave_js docs) Revert “Bump pydaikin 2.9.1 (#93635)” (@mover85 - #94469) (daikin docs) Bump russound_rio to 1.0.0 (@chphilli - #94500) (russound_rio docs) Fix entity and device selector TypedDict’s (@raman325 - #94510) Bump yalexs-ble to 2.1.18 (@bdraco - #94547) (august docs) (yalexs_ble docs) Bump regenmaschine to 2023.06.0 (@bachya - #94554) (rainmachine docs) Update Home Assistant base image to 2023.06.0 (@frenck - #94556) Catch InvalidAuthError in shutdown() method for Shelly gen2 devices (@bieniu - #94563) (shelly docs) Fix keyboard_remote for python 3.11 (@lanrat - #94570) (keyboard_remote docs) Fix failed recovery in roku (@ctalkington - #94572) (roku docs) Fix failed recovery in ipp (@ctalkington - #94573) (ipp docs) Improve multipan debug logging (@emontnemery - #94580) (homeassistant_hardware docs)

    0
    arstechnica.com Body mass index gets smack down: AMA calls out harms and “racist exclusion”

    The massive medical group says it has some value but called for a better standard.

    Let's get those obese numbers down! Change the formula /jk

    0
    InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)AW
    AwkwardPenguin @lemmy.world
    Posts 3
    Comments 46