A German Experiment Proved That Simple Concrete Spheres Make Fantastic Batteries. Now, California Plans To Submerge A 9-Meter Diameter Sphere In The Ocean And Is Already Planning Versions Of 30 Meters
Each sphere has an estimated lifespan of between 50 and 60 years, with partial replacement of components every 20 years or so.
The concept is fascinating, but what I'm most curious about is how they achieve that longevity in seawater. Benthic life really loves to settle and build on hard surfaces.
I think the sea has a huge potential of energy production that is totally untapped because of that.
There are tons of ways to produce energy with sea water but as soon as you put any moving parts in water it gets corroded and covered with benthic life (I've learned a word today). Every project of ocean energy production dies because of that.
I would imagine it wouldn't matter how many barnacles and stuff are on it. That's the outside. Everything important is inside, I'm assuming the intake water will be screened or filtered in some way.
Most benthic life (by number) start as tiny, motile creatures. Screens would reduce head pressure and require maintenance. Barnacles of all kinds, as an example critter, settle on everything to which they can adhere. I'm guessing the engineers considered these complications since there have been past power project failures because of sea life. I wish the article went into those mitigations. If it's somehow a non-issue by nature of the design, my curiosity is even more piqued.
I’m pretty skeptical about this- wouldn’t a 30m sphere be incredibly buoyant when empty? I get its concrete, but it’s displacing huge amounts of water. So you’d need some massive anchoring, maybe that’s not a big deal. Second, I don’t know what depths we’re talking about here, but I feel like the stress from cycling these things daily would be insane- in high pressure salt water no less. I also wonder what the efficiency of this system would be compared to other similar batteries, like pumped hydro storage. It seems to me pumping out water to near vacuum while under crushing outside water pressure would be a significant power hog.
It seems to me pumping out water to near vacuum while under crushing outside water pressure would be a significant power hog
Well, yeah. That's the point. It's a battery. Whatever energy you put in to pump the water out, you get some percentage (probably in the 50-70% range) of it back when you let the water back in. The point of these is to store energy from renewables whenever they are providing more power than the grid demands - otherwise the power would be wasted.
Edit: The paper claims 72% efficiency which is pretty good if I understand things correctly
Yeah don't get me wrong- I get it’s a battery. But a battery that’s 5% efficient isn’t great. Now 72? That’s pretty incredible, I’d like to see that in action.
The most pressure it would experience would be the difference in internal vs external pressure. At 1000ft of depth there’s a pressure of 440psi. Assuming the sphere somehow managed a perfect vacuum that’s still well below the 6000psi compressive strength of high strength concrete, hell they would still have more flexural strength. The spheres themselves definitely wouldn’t be the weak link.
Cheap storage is more important than conversion ratio. Enough renewables leads to periods of negative prices without matching storage capacity. Storage can mean 1-2c/kwh charging costs, and even 50% efficiency makes discharged power 2-4c/kwh.
if 0.5m thick sphere, 30m diameter is 1413 m^3 of concrete. $300k to $400k in materials. Stores 150mwh power. About $2-$3/kwh
Regular pumped hydro has an overall efficiency of about 80%. I would guess these sphere things would be similar, assuming you can put them near a high-voltage line, since the underlying technology (pump and turbine) is the same.
Interesting concept, but not very scalable. It's basically a reversed dam - when it's full, there's 0m head of water. Then with excess energy, you lower the level inside, storing the energy in the water outside. E.g -2m head. Water then flows in to equalise head, and doing so, regenerates electricity. Adding depth to supercharge pressure differentials is a good idea, although I wonder how they limit the flow rate, or otherwise prevent cavitation shocks each cycle.
Could be useful as a private industrial battery, but a dam would still be better on an infrastructural level.
Silt did not magically disappear because your dam is spherical, and there is a lot of it on the sea floor. They need to install some kind of filtering system anyway.
Also, the lifetime of a sphere is estimated to be 60 years, while the traditional dam is engineered for 100+ years of service.
The main advantage is that the sea floor is unused and unregulated like the dry land , but then you could as well build an actual scuba diving underwater base with a hydro dam instead of a sphere, it will also be easier to clean and repair, but I guess that would be too much evil moustache twirling to get funded.
Like a battery, it’s not scalable as a one off, but it may be as a modular mass produced item.
Or maybe like a wind turbine. You’d have a field of them comprising a power plant. If you lose some individuals, who cares. If you need to do maintenance you can take one offline or entirely replace it without really impacting the power plants output
An easy manufacturing method would be to 3d print in plastic a double walled shell, with fill holes for concrete, and mounting chanels for motors. Plastic "lining" would provide salt water protection for the concrete.
High social acceptability: Installed far from inhabited areas, these facilities arouse less opposition.
Actually, being very close to inhabited areas, but 0 impact, including nonsensical nuissance arguments, means short power transmission. It's also very easy to pair with offshore wind.
Sounds interesting, but considering how thick hydroelectric dams need to be to hold back a mere lake, how thick are these spheres going to be to hold back an entire ocean?