Do I need thermal paste when swapping out an MXM A card?
Do I need thermal paste when swapping out an MXM A card?
Dell M4800 with a K2100 and I want to shove an M2200 in there. Both are MXM A. When putting the new card in, do I need thermal paste on the main chip or do I just bung the heatsink over it?
I bought the card from AliExpress, it looks shiny new and hoping it isn't a surface fake, so it reports it's an M2200, but burns out after a month!
Thermal paste is always a good thing. If you are affixing a heat sink to a new chip, you’re definitely gonna need some.
Would it be generic thermal paste cheapest off ebay, or a special kind needed? And will 1g be enough?
i would avoid bulk large packed OR no named OR jumbled letter branded thermal pastes
go with the good old known ones like mx4/5 or z5, theyre waay better than the ultra cheaper ones like what ive said earlier(speaking from experience although i haven't tried the fancy ones like kryonaut or similar)
I honestly don’t know of any “bad” thermal paste, and one gram will be much much more than enough. Keep in mind that the layer of thermal paste between the chip and the heat sink will be less than paper thin, so when you apply it to the new chip, only use a drop. It will spread out to fill the space. The instructions that come with the thermal paste should explain the procedure. I suggest that you take a look at some YouTube videos regarding the procedure before you do it yourself, just so you got good idea of how much to use.
Edit: just as a sidenote, I have never, in all of the years eBay has existed, I felt comfortable buying anything from there. But that’s just me, personally. You can get thermal paste on a lot of places (it’s cheap), and I would recommend buying it direct from a quality retailer.