Peeling garlic? Cut off the root end first to make peeling cloves easier
Peeling garlic? Cut off the root end first to make peeling cloves easier
The peel is thicker and attached firmly to the root, so cutting off the root end first will save a lot of time and effort peeling garlic.
you can avoid stripping the peel into tiny sticky pieces or digging grooves into the clove while you gouge or scrape off the peel from the top or side.
this is another lifehack I would have appreciated learning years earlier.
I usually just gently smash em with my cleaver and pluck out the clove.
that was my go to for a while, but it's easy to wind up with sticky little strips of peel and I like making fried garlic slices, like little fried garlic chips, and you can't use a smashed clove for those.
smashing garlic cloves will help, but since i still have to pick out pieces of peel and take off the bottom part anyway after a smash, I usually do the root end cut now.
especially if I'm using an entire bulb, it's easier and quicker for me to cut off the entire root end all at once than a bunch of smashes.
Yo that's fair! I'm often using garlic in stir fries or dips, so I don't want those thin slices so smashing is fine. I'm deffo gonna try this tip for prepping some cloves for pickled garlic tho.
Other garlic related hack, you can cut the top off just above the tips of all the cloves, rub em down with a lil olive oil, wrap em in tin foil and roast em at 400°F for 35 min, skin and all. The resulting cloves can be squeezed outta the bulb like butter and make a phenomenal spread on their own or a great addition to hummus, or mix it with butter and let set for a decadent compound butter.
THERE'S OTHER WAY YOU CAN DO THAT?
Sure, lots of other ways. Use some imagination next time you are in the kitchen. So far I haven't found a better way, but I've tried lots of things and I'm open to someone finding something I haven't yet that is better.
literally exactly how I reacted.
Same trick goes for onions. Bonus points of you leave a little still attached for use as a pull tab.
And very lightly mash so the skin peels away easier. If you're picking at the skin, you're doing it wrong and are likely to get a hard bit of skin up your fingernail, which hurts.
Another good method is to get two large metal bowls face to face with the cloves inside, and shake the shit out of them like a human fire alarm.
Be warned though, this WILL terrify your cats, if you have any
Cocktail shaker works really well for this method too.
I use the plastic containers I keep from when I get Thai food delivered or any kind of Tupperware style box.
I haven't heard of this one, you shake the garlic cloves and they bump into each other and peel themselves? or does this have something to do with the specification of metal bowls?
that seems like a lot of work.
is that a lot of work?
I would imagine it's more the collisions with a hard surface, and metal bowls are simply the lightest way to do that. It's actually not a lot of work; it maybe takes 20 seconds of shaking. I like the other suggestion of using a cocktail shaker, though. That would be quieter AND easier, assuming it's equally effective
If I have a lot of garlic I’ll do that or one of those silicone tube garlic peelers, but if it’s just a few cloves it’s usually not worth the effort for me.
Bonus points if you leave a tiny bit of the root attached to the skin so that when you pull the root off it starts the peeling process
ha, yes! If I notice one side of the peel is thick enough I will do this.
that perfect feeling when you can pull off the whole peel in one piece is amazing.
I cut the root off and use the garlic peeler tube
does this make peeling garlic easier for you?
I could never peel more than one piece of garlic at a time with these, and still had to do all the prep work beforehand of cutting off both ends and then cleaning the tube every time, and I had to push really hard on the tube.
the tubes were a lot more work for me than crushing or cutting off the root and peeling.