I know enphase micro inverters have "anti-islamding" tech that disables output when they lose grid connection. I would expect any reputable manufacturer to also have the same tech.
I don't expect that for backup generators, but the proper way for them is via a transfer switch. You can wire in a properly made cable instead of a suicide cable. The transfer switch would prevent the inlet connector to the house from ever being live. (And since it is a proper cord from the generator, there would be no exposed ends coming from it.)
Yes it is if you read the article, that's exactly how he had it set up, and then you just have to manually move the battery where power is needed. You just can't use your wall outlets when there's an outage.
48v 100ah battery with Bluetooth BMS built in is around 700$ on ali express... Slightly more direct from Amazon in the USA if you want it fast. Will store close to 5kwh which I guarantee you beats out this solution. Of course you'd still need to buy the grid sync inverter (available in many places) as well as a solar mppt charger and solar cells. Still will come below this cost - or you'll simply blow by the capacity of what you would have paid for this solution. But gotta have the old noggin on straight to do it yourself.
If it was that easy to do it right, you'd have small businesses offering to do it for thousands, instead of the current going rates, which is tens of thousands.
Yeah this is not an emergency backup at all. It’s an attempt to add some local storage to the grid and lower your bill. Everything about it is wrong for a power outage. I’m SURE they make this clear on the box!! ;D