[WR] 5x5x5 31.60 single by Tymon Kolasiński

https://www.youtube.com/watch?v=TT-oT2moPcc

Previous single : 32.52 by Max Park (Mar 16, 2024). And the previous, and the previous and … (It was 7 consecutive WR single by Max Park).

Reconstruction https://reco.nz/solve/11096

\#rubikscube #speedcubing

@cubers

Been playing with my new FTO for a dew days - wasn't able to solve it without help. I went with the Bencisco method and it's a really fun solve. It did take a bit for me to fully grasp solving centers (it's like 4x4 Yau method, but with a restriction). And I still don't fully comprehend solving the last 3 triplets, but I can always get them.

Some of my favorite twisty puzzles are ones that don't take a lot of learning. Just intuitive moves if you have a method. So more like solving a puzzle than following a list of steps. The FTO is almost that. The few algorithms I had to learn are basically intuitive once you see them once.

I definitely see myself picking this cube up a lot to solve for fun. My main complaint is that sometimes the puzzle is just solved after solving the centers. I actually really like the last step, but often multiple steps get skipped at the end. But then that's just an excuse to scramble it up again!

[WR] 3x3x3 4.08 average by Yiheng Wang (王艺衡)

https://invidious.fdn.fr/watch?v=OTgzEUd6cQE

3.83 (6.16) 4.55 (3.71) 3.88

Previous avg : 4.25 by Yiheng Wang

\#rubikscube #speedcubing

@cubers

Mere days after photos of a 35x35 surfaced, Preston Alden has unveiled a 49x49:

> It weighs 30 kg, stands 34 cm tall, and consists of 13,827 pieces. Every piece of the cube was 3D printed using PETG plastic (aside from the bolts and springs).

!

!

Congratulations to Preston on such an incredible achievement. I've never seen olzing on such a large puzzle!

More info on the twistypuzzles forum: https://twistypuzzles.com/forum/viewtopic.php?t=39559

A few photos and videos have surfaced of what appears to be a 35x35 Rubik's cube.

Tony Fisher has posted a video with some commentary and early speculation on its legitimacy. He also notes that the puzzle appears to have been spray-painted (rather than dyed or stickered) as evidenced by the over-spray between the yellow and blue faces.

Yusheng Du (yes, that Yusheng Du) has posted a video of two dudes lifting it.

David Marcos Mazón has reposted a stop-motion video from an undisclosed source, which implies that the puzzle turns on at least one axis.

As far as I know, no videos of the puzzle being turned have been released.

Further discussion on the twistypuzzles forum.

This 35x35 comes less than 3 months after Matt Bahner presented his 34x34. Given the time it takes to design and build a puzzle of this scale, I think it seems likely that the puzzles were constructed concurrently.

Welcome to our monthly discussion thread!

Anything cubing related is welcome.

Fun video from Tony Fisher.

What is your score?

Finally, UnCube has solve-synchronization. This feature has been a long time coming, but I've been taking a break from development on this app.

For the time being, at least, I'm back.

Some things to look forward to:

Statistics are coming. Soon users of the app will be able to view and export their solve statistics. (Open to suggestions as to the format of the exports)

Help wanted

If you are a graphical designer (and are willing to work for free), UnCube needs an icon/logo. See the GitHub Issue on this for more information. If anything is unclear, you can post a comment there asking for more information.

[WR] 3x3x3 4.36 average by Yiheng Wang (王艺衡)

https://invidious.fdn.fr/watch?v=2IIIvZor6qI

(6.11) (3.97) 4.48 4.59 4.02

Previous avg : 4.48 by Yiheng Wang too.

During first round… With Leo as a judge!

\#rubikscube #speedcubing

@cubers

Hello everyboby :)

I'm new in this community. Happy to join you.

Today, I received a MoYu WRM V10 Ball-core MagLev UV instead of a MoYu RS3M V5 Ball-Core MagLev UV + robot. If you know both:

What are the differences between these cubes? Do you think I should keep the RS3M or not?

I only have few days to make a choice. Can you help me to make it please?

[WR] 3x3x3 OH 6.05 single by Sean Patrick Villanueva

https://invidious.fdn.fr/watch?v=Adv1YuiOgIo

Previous single by Max : 6.20.

Sean now has single AND avg WR for OH.

\#rubikscube #speedcubing #Rouxvolution #333oh

@cubers

Welcome to our monthly discussion thread!

Anything cubing related is welcome.

[WR] FMC single 16 by Levi Gibson and Aedan Bryant (yes, it's a tie)

Levi's reconstruction: https://invidious.fdn.fr/watch?v=zmDdW\_qCEwc

Aedan's solution: https://invidious.fdn.fr/watch?v=epnEalnBCm0

It's also a tie with Sebastiano Tronto's 16 moves, back in 2019.

\#speedcubing #rubikscube #fmc @cubers

[WR] 4x4x4 15.71 single by Max Park

https://invidious.fdn.fr/watch?v=tuCM\_uLW1fw

Max hasn't posted the video yet.

Previous record 15.83.

Its average was 19.77, less than 0.4s from its WR. I guess it will be broken soon…

\#speedcubing #rubikscube @cubers

[WR] 2x2x2 0.78 avg by Yiheng Wang (王艺衡)

https://invidious.fdn.fr/watch?v=\_lD51aDtvdg

Another point of view: https://invidious.fdn.fr/watch?v=ID18nvv9tbU

Previous record: 0.92 by Zayn Khanani

\#speedcubing #rubikscube @cubers

[WR] skewb 1.52 avg by Carter Kucala

https://invidious.fdn.fr/watch?v=m-OLHOz\_l2c

Reconstruction : https://invidious.fdn.fr/watch?v=y4ll7k0ineY

\#speedcubing #rubikscube #skewb

@cubers

I'm starting out with a cheap Mo Fang Ge brand cube but it's pretty stiff for my taste. I saw some videos about speedcubes and how you can adjust them and all that, thought it was neat. What are some good cubes out there? I would want to avoid any Chinese brand cubes if possible because cheap and Chinese probably means their workers aren't fairly compensated.

Edit: after much research, I don't think a non-chinese brand cube will be possible. So I guess recommend me whatever the best options are. From the $10-20 range would be a good price for me.

Fastest was 4:17. I'm trying to match it

Learned how to do it w/ video yesterday using jperm's 10 min tutorial: https://www.youtube.com/watch?v=7Ron6MN45LY

Edit: I'll post my cube tmr if someone reminds me.

Welcome to our monthly discussion thread!

Anything cubing related is welcome.

[WR] 3x3x3 OH 8.09 avg by Sean Patrick Villanueva

https://invidious.fdn.fr/watch?v=ihV-FH0Bfcw

Previous avg by Max : 8.62.

\#rubikscube #speedcubing #Rouxvolution #333oh

@cubers

[WR] clock 2.31 single by Eryk Kasperek

http://invidious.fdn.fr/watch?v=KzqJv2VaQDE

\#speedcubing

@cubers

I wanted to try a stronger magnetic cube (main is currently Tengyun v1). QiYi M Pro has a ~10$ ballcore UV, so it went onto the cart. The turning feeling is really close to my tengyun, so I like it.

Master pyraminx isn’t too much of a hassle, pretty straightforward with pyraminx algs.

I haven’t scrambled the rua yet, but it’s very stiff.

Matt Bahner has (cheekily but impressively) beaten Grégoire Pfennig's 33x33 record by just one layer.

The puzzle itself is cool, but I actually found the explanations of the mechanism design and 3D printing techniques more interesting.

He seems to have used a linear mechanism, similar to Oskar's floating anchors approach, but without the floating anchors. My guess is that the ball shape eliminated most of the twisting forces on the pieces which necessitated the floating anchors in Oskar's design.

Flattening off small areas of the pieces to allow them to be printed in an orientation which doesn't require support bothered me a bit, but I can understand why he did it. Support material can be a pain in the ass.

I've had a 3x3x3 for a few years and so far, I solve it with the beginner method. I watched a J Perm video on the F2L approach and now I'm trying to learn to do that faster. At the moment, I'm still faster going one layer at a time.

If you also started with the beginner method and then learned to use F2L, how long did it take for you to get faster with F2L?

Like I said in another recent post, I'm not looking for a WR. I just want to be as fast as my kid at this point. She learned F2L from the start. :)

Welcome to our monthly discussion thread!

Anything cubing related is welcome.

Hey y'all - anyone still here? :)

I do cubing just for fun - no world records here, eh? These are my three newest cubes:

• 4x4x4 - I can't remember which one exactly, but it's a lot of fun to solve. Not magnetic

• Megaminx - YJ YuHu V2 Megaminx Magnetic

• 1x1x1 - 1x1 Speed Cube - Black

The megaminx is messing with my head but I will keep at it. Any tips would be appreciated.

That 1x1 man, I'm leaving saving that for last, eh. :)

[WR] 5x5x5 32.52 single by Max Park

https://invidious.fdn.fr/watch?v=7YUlPB8FKi4

If he keeps this up, he'll be faster than me with the 3x3x3

\#speedcubing #rubikscube @cubers

>"I always knew this was possible, but never expected it to actually happen..." again...

>This one was even more absurd than my last world record 9 months ago. 2 slices to U perm - 10 slice solution. Probably one of the most ridiculous scrambles to have ever been generated (thanks Dan).

>This scramble had the potential to destroy this event, potential to stand for at least a decade, perhaps longer...

>But no, I choked, and that's okay. I tried to 1look it but I wasn't mentally focused enough to do so. I knew the bottom layer would be solved after OBL but that's about it. My execution wasn't good, but I'm so relieved to have at least broken WR given the immense pressure of such an easy scramble.

>Eventually someone will break the sub-3 barrier and beyond, given the right circumstances. This just leaves the door open for more people to have a shot at WR.

>And of all people to be the first to have multiple sub-4s, I don't think anyone expected it to be me...

Previous record was 3.69 by Max Siauw

Previous record was 1.01, by Zayn Khanani. A huge step!

Explanation of inspection : https://invidious.fdn.fr/watch?v=-7yYeTOZNQ0 (spoiler: that’s crazy)

[WR] 3BLD 12.00 single by Tommy Cherry

Tommy takes back the WR by 0.10s https://invidious.fdn.fr/watch?v=gdHPag6z2NY

\~5s of memo, 7s execution. Have I already said that I’m impressed by cubers?

\#speedcubing #rubikscube #3BLD

@cubers

Over a decade after xb27 revealed a similar puzzle (but kept the mechanism secret), someone has replicated the feat.

[WR2] 3x3x3OH 8.64 avg by Sean Patrick Villanueva

https://invidious.fdn.fr/watch?v=b28k6kQqSNk

Finally sub-9 for Sean! Viva la #Rouxvolution!

\#speedcubing #rubikscube @cubers

[CR] 3x3x3 3.47 single by Yiheng Wang

https://invidious.fdn.fr/watch?v=O1sc1Y2moT8

Yiheng Wang ties Yusheng Du's WR. Alternate angle: https://www.instagram.com/reel/C27ickXJ3pm/?igsh=MXhwemI5NGhtZ2ZwYg%3D%3D

\#speedcubing #rubikscube @cubers

[WR] 6x6x6 1:06.46 mean by Seung-Hyuk Nahm

https://invidious.fdn.fr/watch?v=pI1sgmJfrU4

A world record on n×n×n not by Mak Park !

\#speedcubing #rubikscube @cubers