I mean, it is a fun, thorough thought experiment about life in a world with a different amount of dimensions, done in the 19th century, that still holds up today and not many people have improved upon. I would say that’s better than good.
DO IT! DO IT NOW! You have to show them the checks and balances. There is no god king, there is no one that is not accountable for their actions. Impeach every single one that was nominated by him. Illegitimate court.
Great book written in the late 1800s called “Flatland” tackled this shit pretty well. Still a great read, still messes with your head.
It has gotten more fun grinding at extreme for samples, and helping out lower level players, since the buffing patch. The endgame is just kind of flat.
(edit): The article doesn’t go into how and why there was a decline, how Sony and Arrowhead kinda shot themselves in the foot with account linking. I think this would still be a fast moving train had they not tried to do that, and had the man power to focus on bugs, balance and battles at the same time.
I don’t see any bananas on it. Should be fine in a months.
Like a scene from “They Live”
Proxmox is based on kvm/qemu, and is very resource conservative. There is virtually no impact on performance due to the hypervisor, even on older processors. Scheduling on the cpu and hypervisor makes running multiple VMs at the same time trivial as well. RAM and I/O bandwidth are the two things that can affect performance. Running out of RAM due to too many VMs will grind you to a halt, but so would running too many applications or containers on bare metal. Running everything off of one spinning sata disk will make it impossible, but again, same downfall on bare metal.
Those minimal impacts to performance are a minor nuisance compared to the ability to run experiments and learn on sandboxed VMs. Now that TrueNAS has better virtualization support, it has caught my eye as a better homelab solution, but I will always have a proxmox server running somewhere in my stack just due to the versatility it gives me.
Thought they were synonymous. Thank you for making the distinction.
Line interactive basically means the battery will always be feeding the devices on UPS. Make sure you don’t go over the listed wattage. I learned the hard way and bought an under spec Tripplite, the battery kept dying. I now have a UPS specced out for my router and the Verizon box outside, not anything else on my rack. You should be fine, just saying in the future when you add devices, keep that in mind.
So if I see it on the “open web”, I’m free to use it however I please? Oh, I get thrown in jail and everything I own taken away.
If companies are people per “citizens united”, why doesn’t the same apply to them?
Yea, this is a good comparison. A washed up, talentless, lying, cheating, stealing, has-been hack of a clown, or a pretty cool old guy that’s been around the world, has cool stories to tell, loads of wisdom but falls asleep every now and then… like the clown does at court.
What’s the escape in watching two people in the exact situation as you eat at McDonald’s and go for a walk in the park over and over again?
Ideology of “I get mine, you get shit”. Ideology of “I get what I want because I’m on this bench”. Ideology of “what can you do for me?”.
Illegitimate court. Every single ruling by them should be overturned and every citizen should ignore them.
His lines, knowing now that he was allegedly doping the whole time, are especially ironic
No, he needs your money, otherwise he has to spend his money on what he wants, and that would mean he would have less money. It’s always easier using other people’s money.
It can be tough through words to understand intent sometimes, and I to write sarcastic and dry, so no problem.
Flatpak is helpful, it’s how I ran several programs before my work forced me to windows, it does have its place in the toolbox.
Setting up my server as a newbie some years ago, I did not have the ability to purchase more then one 8TB hard drive. Outgrew that rather quick and now I have two additional 16TB drives, in a Just A Bunch Of Disk configuration, mounted to different /mnt mount points. I know this is not ideal, but lacking the ability to expand further or buy new drives for a new zfs pool and transfer, I don't have much of a choice but to wipe the drives, set up a zfs raid and re-download everything.
I have everything set up in docker-compose files, so I'm pretty sure I just need to keep those and the folders where the configs are, modify the compose files with the new file structure and... I am unsure where to go from here. Will everything start being grabbed as soon as my dockers spin up? Is there an additional procedure I need to do to make sure I don't wipe my existing config files with blank empty ones? Is there an easier way of doing this?
I have an 8gb Raspberry Pi 4 that has been a workhorse for years. I keep it for my not intense but essential networking purposes, NetBoot.xyz, Homepage, etc., because I can run it over PoE (edit: Power over Ethernet), so it is always on as long as my network is up.
It is growing long in the tooth, and I find myself wanting to replace it with something a bit more capable. Looking at the 8gb Pi 5 at $80 plus another $30 for a PoE hat, I wonder if there is something out there that would be a better value for running PoE? Can you convert a micro pc over to PoE? Does anyone have any recommendations for computers that run off PoE or can be converted to PoE?
I am trying to set up a repository of knowledge for my job. Was thinking a wiki, but I need something that I can make as simple as possible for the end user, as some of them are not familiar with markdown or html. Is there a self hosted option that is dumb easy simple to navigate and edit for the end user?
I have this image in my head I can’t quite pull what musical it is from. It’s a 1950-60s western, in color, a woman is walking around a ranch singing about how everything would be different and everyone would treat her differently if she were a man. She was just talked over by her dad or older brother. May not have been a western, but I distinctly remember her on or near a fence post during the number. I do not remember any particular face or name attached to this film. Anyone have any ideas of what movie this was?
I am currently looking into upgrading storage for my homelab. The two routes I am looking at are grabbing a dell r730 or a disk array. They are both about the same price, but my major purchase concern is heat and noise. My office/homelab is in a 10x10 foot room. I have worked hard to get the sound floor at my desk to be around 44dB, and the temps to top off at 79f, 74 on a good day with the door open. Is a disk array going to add more heat and noise to the room than a dell r730 server running proxmox with trunas?
About a year go I bought one of those fanless four port routers. Ordered one with a celeron, they sent me one with an 11th gen i3. Since then, core temps will regularly spike to 100c and it will throttle. Took it apart and found this as a cooling solution, which I’m sure would work fine with a celeron, but they gave me an i3 1115g4, with a base frequency of 3.1ghz, which can’t dump heat into this aluminum slug fast enough. The bios does not let me lower the clocks, or save power anywhere else. My only solution to make this work is to improve the cooling solution.
Would love to do a tower cooler, but can’t find any place that produces one that will fit my mounting holes. Been looking at laptop solutions as well, but again I am running into bracket and mounting problems. Nothing shows dimensions so I don’t waste time and money on solutions that don’t fit.
I have found copper shims, ranging from .3mm to 1.5mm thickness in a 20mmx20mm form. The aluminum slug they used is 45x25x2.73. If I stack these shims with thermal compound in between, would I get better thermal conductivity than just the aluminum slug? Are there any better ideas than what I am coming up with? Would it just be cheaper to buy another router that is cooled correctly? ! ! ! ! ! !
I have friends and relatives that would like to do some memory and compute intensive tasks, but lack the hardware locally. I have loads of ram doing nothing and a little compute to spare. Is there a way for me to set up some service accessible to them that would allow them to spin up VMs, similar to Linode or DigitalOcean? I know letting outside access to a proxmox server would be disastrous. I guess I could setup a VPN server into a virtualized proxmox server? Would rather find a way to point them to a url with a username and password and have them able to use my server as their vps like AWS or Linode.
first off, thanks for everyone and their suggestions, and apologies for not responding back, was having issues with my personal lemmy instance.
I took everyone's advice and have gone test print crazy. I will attach the pictures to this post. I have tried to understand what I am looking at on my test prints in relation to what is not configured correctly on my printer. it's just not clicking. most of my prints look fine, the surface has good infill and the part looks ok from the outside, like benchie. but underneath, it looks like I am having either adhesion issues, bridging problems and support problems as well. but adjusting setting as suggested in here and here did not really improve anything, and in some cases made the print worse.
I am using the Flashprint slicer that came with the printer. I have tried cura and prusaslice and can't even get a print started on those, even with a raft. I'm sure they are better slicers that what Flashforge makes, but again, something just isn't clicking. any further advice would be greatly appreciated.
I am trying to finally get my homelab organized, and I need assistance visualizing my network. I am just wondering if there are tools out there that assist with this. I have tried the paint and gimp routes, and I find myself spending more time trying to make it look good and organized rather than actually mapping my network. Is there any utility out there that is purpose build just for visualizing network topology? Or am I better off with just graph paper, pencil and a straight edge?
Thinking of lining the inside side panels of my 48u rack with some sort of sound deadening material. Was going to go with rock wool or the cheap self adhesive foam bricks you can buy off amazon. Was thinking of doing the same thing to the ceiling above where my rack sits and the walls behind as well. Mainly trying to cut down on the echo and high frequency whines. Anyone have any advice or suggestions? Maybe talk me out of it, or some other solution?
Not sure if this has come up, but one UI element I liked from Apollo and “the-one-that-shall-not-be-named” was the floating button in a thread that would take you to the next top level comment in that thread. Not sure what this feature is called, but so far can’t find it in any Lenny/Kbin client. Is this something that is in Memmy’s pipeline?
Just picked up an APC 48u server rack. There were no pictures of it in the post and I did not notice until I got it home and set up, that the rack rails have threaded holes instead of square cage nut holes. I can’t seem to determine the thread size and pitch, and have a thread gauge coming. Until then, does anyone know anything about this? The people I grabbed it from had used self tapping machine screws and drove them in with an impact wrench. Is this what APC had intended, or is there some $300 proprietary screw I have to buy from them?
Just picked up an APC 48u rack. The listing had no shots of it, and I didn’t notice till after I got it home and set up, the rack rails do not have square cage nut holes, but what appear to be threaded holes. I can not find a bolt or screw with the right size and thread pitch. It looks like it’s an M5 fine thread, but wanted to see if anyone had any info on this. Am I just supposed to get self tapping machine screws, like the previous owner did? Or is there some APC proprietary bolt that I’m working with here? !
Running proxmox 8.0.3, spinning up new VM, noticed my netboot was SSLLOOWW. ran speedtest-cli in the host shell, was getting 4Mbits/s, ran on a VM on that same system, was getting 500-600 Mbits/s. I have NO clue what to make of this. Is this a bridge issue in proxmox? I don't think it's a DNS issue, everything else is working, business as usual, even still serving plex and arr on the same system. Any ideas to get me running in the right direction?
Edit: It's DNS. It's always DNS. Disabled AdGuard Home and magically speeds on the host were back. Confused, but have a direction at least.
I wanted to thank everyone that responded to my last post. Everyone gave good advice, and hearing that everyone hit a wall they had to just grind through helped a lot.
Took my sorceress and mixed things up. Didn’t focus on one element, and tried to match attributes in the skill tree instead of elements. Still have hydra as my main focus, but I rely very heavily on chain lighting and frost nova. I was actually able to finish act II.
Again, thank you all for the awesome words. You guys a super swell!
Diablo was the first game I ever bought for my perfoma Mac when I was a kid. I have played out each game since. I played the betas. I have reached a point where I do not know what to do.
I have not finished the campaign. In fact I haven’t even finished act III. Both my barbarian and sorceress have appeared to have reached a plateau at around level 35.
At around level 30, in world tier II, I started getting really terrible drops. Magic only, legendary that was worse that what I had. Finally around 35 for my sorceress and 37 with my barb, I got fed up with the terrible drops and just took the first positive change I found and went back out to see if this would yield better loot.
The first bear I meet I use all my health potions on. My attacks seem to take less health away. I finally make it to a dungeon. Can’t make it to the boss because I keep dying.
I figured I sold my sweet gear, let me just jump back to world tier I and grind till better loot falls. Bears still three hit me, and I still get crap loot.
I changed my skill load outs, made best use of the loot I got and continued to try and grind to get better loot. I still only got magic and crap legendary.
What am I supposed to do at this point? I can’t make it to a dungeon to fight a dungeon boss without having to TP back to replenish my potions a half dozen times. Can’t move the campaign forward, simple crowd of minions melt me in a second. Monsters don’t even drop health globes. Am I just supposed to start a new character and hope I don’t repeat this same mistake again? How are you supposed to recover from a mistake like that?
I know what I am doing is mostly outside use case, but I work with what I have. I recently acquired a reolink camera, RLC-822A. I have it up and running great with frigate, except for the viewing of recordings, which are h.265. Every computer in my house is either too old or runs Linux. Viewing recordings on my iphone works great, but was looking for a way to have a permanent viewer, almost like a kiosk.
Using a raspberry pi 4 8gb with Raspi OS I was able to get a version of chromium to stream the h.265 recordings. Works ok, the pi can run for about 18 hours before artifacts start to happen and I have to reboot.
I have a Dell tower with dual xeon silver 4114, 192gb of ram and a quadro p2000. I am passing through the p2000 to frigate on an Ubuntu VM. I want to use this VM and pass through p2000 to run the frigate kiosk. For some reason, even though the hardware supports it, I am unable to get h.265 streaming to work on this VM.
How is it that an ARM based SBC running a version of Debian can decode and play h.265 and an over powered VM with hardware that is known to support that codec can not? Is it an issue with passthrough and decoding? I have nvidia container toolkit, and the p2000 works great with frigate in a docker container. I can watch h.265 through vlc and other apps, but can not get chromium hardware acceleration to work. Any ideas?