Figured I should do a Black Friday sale also. No coupon needed, sale ends December 1st.
Sunsets are the only choc tactiles. Looking forward to the silent linears coming from lowprokb!
I'm not going to delete any of the posts relating to the past days drama, but they are locked and any future posts about it will be removed.
So, you're saying I should be temp banning you as well?
Is making a post asking if there are moderators "on topic"?
The submissions they made were on topic, just maybe a topic you didn't want to discuss. I absolutely think this person misunderstood the intentions of the community and got defensive, but the community also dogpiled on this person. If maintaining a healthy community is the goal, we should accept responsibility for being a part of the problem.
I'm not against locking all the posts related to this issue, but I'm not gonna ban the person. I'm not gonna fight any of the other mods if they have different opinions.
I wasn't trying to correct you at all, just acknowledging that the counter isn't representative of everything.
Things didn't get this far from the actions of a single person, so if punishment is expected to be passed out then I don't think it's fair to punish only one person. Should the people submitting things to make fun of this person also have their posts locked and given a temp ban?
An active counter doesn't mean things aren't being seen. I've been here and seen everything unfold.
This person isn't acting alone. They've submitted stuff that is on topic and everyone else engaged. I'm not sure what action is expected of the mods.
The Eternal Keypad has a left handed configuration.
Since you're going hotswap, you've already got about 3mm of space on the back of the PCB. if you make your case just a tad taller, your battery could fit under the PCB.
unfortunately, using a Xiao makes this approach less than ideal. The Xiao's battery connector is a pad on the back, reducing the amount of space a battery can fit.
Yeah, this shouldn't be a problem at all. tzarc's Djinn is an example of dual screens.
These are Chicago Steno caps that I had printed in MJF from JLCPCB.
Contribute to hazels-garage/cut-slope development by creating an account on GitHub.
![GitHub - hazels-garage/cut-slope](https://lemmy.world/pictrs/image/f54609fe-0670-4193-93e1-56d960694a7f.jpeg?format=webp&thumbnail=256)
I've posted a couple times about Cut Slope, but one last post to announce that I've released the source code today.
I've got a couple of the prototypes left if you're interested in getting one without getting a whole order fabbed.
crystal are 3pin, pro are 5pin
I use purpz on pinkies and thumbs, then silvers everywhere else. I can see how the 10gf differences between Reds and Silvers might not seem like a lot, but it was noticeable for me. There's also the Pro Reds which are slightly lighter at 35gf. After that you're into pink/purpz range which might be too light.
Boards with surface mount diodes are most likely using 1N4148W SOD-123. I think there might be variations of the corne that don't use surface mount diodes, so make sure the one you're getting supports them.
![the background blur](https://keeb.lol/pictrs/image/2cad73ef-b144-40a8-a6b2-119b18a83e63.jpeg?thumbnail=256&format=webp)
![](https://keeb.lol/pictrs/image/2cad73ef-b144-40a8-a6b2-119b18a83e63.jpeg?thumbnail=1024&format=webp)
Technically not an ergo board, but in it's current setup I'm using it as a one handed gamepad. That makes it ergo, right?
After a year off from gaming, I've been itching to play. While designing some sort of gamepad, I realized I had basically already designed what I was wanting - Chaz.
After tossing ZMK and an adjusted keymap on it, I think it'll work well enough while I think about what I really want in a gamepad. If, for some godawful reason, you want one of these - I've got a few kits up on my site or if you think you want five of this abomination, it's Open Source.
![the background blur](https://keeb.lol/pictrs/image/93b5fd87-0c62-4591-b637-5f351c2f51ed.webp?thumbnail=256&format=webp)
![](https://keeb.lol/pictrs/image/93b5fd87-0c62-4591-b637-5f351c2f51ed.webp?thumbnail=1024&format=webp)
My latest design - Cut Slope.
- integrated RP2040, 16MB flash
- Choc spaced, ortho-ish with dropped and splayed pinkies
- Full color, 240x320 display
I've got a few of the prototypes listed on my shop if anyone is interested in grabbing one: https://shop.hazel.cc/products/cut-slope
![the background blur](https://i.imgur.com/gcga52p.jpg?thumbnail=256&format=webp)
![](https://i.imgur.com/gcga52p.jpg?thumbnail=1024&format=webp)
Hardware wise, Cut Slope is fully functional. Screen works, just need to figure out what I want to put on it.
Still working on a full case, but printed a quick tray for peace of mind while using it.
![the background blur](https://keeb.lol/pictrs/image/ad597bc2-be3f-4bb8-9d03-b5d9bf6b738f.jpeg?thumbnail=256&format=webp)
![](https://keeb.lol/pictrs/image/ad597bc2-be3f-4bb8-9d03-b5d9bf6b738f.jpeg?thumbnail=1024&format=webp)
Just got my first embedded design in and it works!
Embedded RP2040. ortho-ish layout with dropped and splayed pinkies, thumb fan, GMT-020 display (🤞).
Now to figure out Quantum Painter and build a case.
![the background blur](https://raw.githubusercontent.com/hazels-garage/chaz/main/images/chaz.jpg?thumbnail=256&format=webp)
![](https://raw.githubusercontent.com/hazels-garage/chaz/main/images/chaz.jpg?thumbnail=1024&format=webp)
Nothing super exciting, just a choc spaced QAZ. Using the new set from fkcaps.com to get all the needed sizes.