Skip Navigation
What's a good graphics card for jellyfin?
  • This. I used a P1000 for transcoding and eventually switched to a 12th gen Intel chip with integrated UHD 770 graphics. It completely blew me away. Insanely low power draw and barely breaks a sweat transcoding multiple streams. Consider this route over a GPU if you can.

  • Intel i5-12500 vs i5-13500 Unraid
  • I appreciate the info! My 12500 has been great to be honest but 13th gen just seems like such a performance jump with the same power draw. The Intel UHD 770 is a beast of an iGPU. I’ve had it for a couple years now and I am still blown away by the efficiency and quality compared to the P1000 that I had before.

  • Intel i5-12500 vs i5-13500 Unraid
  • Good point. Most of the info I see related to unraid and 13th gen is “it works fine” but would love more details. I am also very curious about unraid being able to make use of p vs e cores. Thanks for the input!

  • Intel i5-12500 vs i5-13500 Unraid
  • Thank you for the reply! I am probably in the same boat as you when it comes to tangible energy/cost savings but was curious. Maybe if I can catch a deal and get a decent amount for my existing CPU, I’ll pull the trigger

  • Intel i5-12500 vs i5-13500 Unraid

    Kind of a dumb question but I’m genuinely curious: is this a worthwhile upgrade? I run a server with a single vm and a few dozen docker containers. I’m intrigued by performance and efficiency cores and whether there would be a noticeable effect on both energy efficiency and performance vs the 12th gen. I’ve looked at the cpu benchmark comparison and see the numbers and there looks like a big increase in performance with little downside other than the cost of doing it. Any input is appreciated.

    8
    Need to order switches
  • I absolutely love Zooz. Their customer service is fantastic and products just work, if you can provide proper Z-Wave coverage. If you prefer WiFi, I have several Shelly products behind traditional switches that have been rock solid.

  • Problems with Zigbee2mqtt
  • I haven’t had this issue specifically but I’ve noticed when adding color changing bulbs, the color changing ability doesn’t show up in Home Assistant until I change the color in the dashboard of zigbee2mqtt. After that, home assistant recognizes the bulb’s capabilities. What hub do you have?

  • Unraid: WebUI won't load for containers routed through OpenVPN-Client
  • Do you have Nginx on the same bridge as Overseerr? If you have multiple docker networks, they need to be on the same so they can discover one another. That bridge also needs internet access so you can generate the cert. Hope this helps

  • InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)GA
    gazoinksboe @lemmy.world
    Posts 1
    Comments 37