They do not. It was suggested that ones with flavour containing diacetyl could cause popcorn lung. However, cigarettes contain a lot more diacetyl, and popcorn lung is not one of the many health risks of smoking. There is some anecdotal connection between diacetyl and popcorn lung, but far from a scientific consensus.
Thanks! Sorry, forgot to make sure the links to the model was posted. Now they are.
STL files and FreeCAD document posted on Printables: https://www.printables.com/model/741845-parametric-monitor-stand-feet
And GitHub: https://github.com/funkyfourier/monitorstandfeet/
![the background blur](https://lemmy.world/pictrs/image/5408739a-a01c-4c4e-bf1b-b67618fe7648.jpeg?thumbnail=256&format=webp)
![](https://lemmy.world/pictrs/image/5408739a-a01c-4c4e-bf1b-b67618fe7648.jpeg?thumbnail=1024&format=webp)
Model designed in FreeCAD and is fully parametric
Get yourself a stepped caps lock keycap, something like this:
https://cdn.shopify.com/s/files/1/0218/4886/products/SteppedCaps_grande.jpg
Have a K3 Pro at work, and I think the K8 Pro feels a lot better, especially with the 3d printed case. Because of the reduced travel I keep bottoming out the keys on the K3 which does not feel like it is good for my hands. Also tried o-rings, but they don't work the same way as on a normal profile keyboard.
The V-series is a lot lower, and if I knew about those from the start I'd most probably just get one of those and skip the bluetooth.
I did not, it is still in its original case. In the new case there is a holder for a cylindrical li-ion battery. Have not dared trying it yet, though, but pretty sure it will work.
It was way more work than I anticipated. Getting the measurements correct for the standoffs, daughterboard, switches etc took a lot of work and test prints to get right. OTOH I got a working prototype ready pretty fast (1-2 days) which basically just had the standoffs and the daughterboard exposed.
You might also consider doing something like this guy did: https://lemmy.world/post/2817315
![the background blur](https://lemmy.world/pictrs/image/e49dc731-c17b-44d7-9bc8-c7818a169439.jpeg?thumbnail=256&format=webp)
![](https://lemmy.world/pictrs/image/e49dc731-c17b-44d7-9bc8-c7818a169439.jpeg?thumbnail=1024&format=webp)
cross-posted from: https://lemmy.world/post/8615378
> Designed and 3d printed my own custom case for the K8 Pro, since I thought it was too tall and I didn't want a wrist rest.
![the background blur](https://lemmy.world/pictrs/image/e49dc731-c17b-44d7-9bc8-c7818a169439.jpeg?thumbnail=256&format=webp)
![](https://lemmy.world/pictrs/image/e49dc731-c17b-44d7-9bc8-c7818a169439.jpeg?thumbnail=1024&format=webp)
cross-posted from: https://lemmy.world/post/8615378
> Designed and 3d printed my own custom case for the K8 Pro, since I thought it was too tall and I didn't want a wrist rest.
![the background blur](https://lemmy.world/pictrs/image/e49dc731-c17b-44d7-9bc8-c7818a169439.jpeg?thumbnail=256&format=webp)
![](https://lemmy.world/pictrs/image/e49dc731-c17b-44d7-9bc8-c7818a169439.jpeg?thumbnail=1024&format=webp)
Designed and 3d printed my own custom case for the K8 Pro, since I thought it was too tall and I didn't want a wrist rest.
Thanks a bunch!
Another question: What did you do with the battery? Just discard it?
Pretty darn cool! Some questions:
How did you get the placement of the standoffs correct? What did you use for standoffs? Are those screws covered in o-rings? Are those keycaps the same type as the Keychron low profile series?
Having been working on a custom 3d-printable case for my K8Pro, and one of the biggest challenges has been the exact locations of the standoffs.
This absolutely. Using variables is a very powerful feature which enables robust, solid and parametric modelling. The way it is implemented currently, however, is very crude. I have also had issues where when a cell refers to another cell further down in the spreadsheet, all sorts of mysterious bugs occur.
Would be nice if someone would implement a proper solution for this. I'd be willing to chip in on financial support if that would be required.
Ouch... Personal phone number exposed on Google Play? Not good. If there is not a cheap and easy way for me to get a second phone number I guess I am out. Have seen it coming for a while, Google Play is no longer a place to be for indie devs.