Thanks for sharing. I also thought about integrating my HA server into my Tailnet so that HA can access my other devices (NAS, etc.). It's a long story because my HA runs in an own VLAN along with all other IoT devices.
Anyways, may I ask you how you installed Tailscale? I was not able to install the Tailscale client on by HAOS-based Home Assistant instance.
Sounds awesome. You convinced me to order one then. Thanks for sharing your insights ☺️
Wow, that sounds alarming. I mean, one usually has good intentions when trying to protect the printer from dust and kids, but now I'm learning that it could potentially be more harmful than beneficial. Do you have the link to the YouTube video you mentioned?
![the background blur](https://discuss.tchncs.de/pictrs/image/c1a94371-afc1-4da7-be35-f2662afa4248.jpeg?thumbnail=256&format=webp)
![](https://discuss.tchncs.de/pictrs/image/c1a94371-afc1-4da7-be35-f2662afa4248.jpeg?thumbnail=1024&format=webp)
Last week, I printed this lamp cover successfully. Print direction was "bottom to top" without any support material. Now, the last print of the same cover failed miserably. The main difference is that my Prusa MINI+ now lives within an enclosure so I assume the temperature within the enclosure might be the culprit here. Would love to hear your thoughts on it and I'm sure that you have an idea how to circumvent this situation in my next print.
I used PLA with a nozzle temperature of 200°C and a bed temperature of 60°C.
Looking forward to hear your thoughts ☺️
Interesting. Can you share your insights how good the person detection works in combination with Coral?
Ah, nice one. Thought about something similar as well (now where we use Tibber as our electricity provider). :)