Accept those that come and act to integrate them into society. They come seeing a better life and reprieve from persecution, just as the immigrants from Europe through the 1700s, 1800s, and early 1900s did.
Thanks for the advice. I grabbed a gtx 1070 off eBay for $70 all in. The listing says it has two bad HDMI ports, but that's fine because I only use one monitor. Thanks
I'm looking to upgrade the GPU in my desktop. I don't game anymore so the PC is more of a workstation. What I currently have is a reason 4850hd. It's old, but it wasn't when I bought it. I had two in x fire for a while but one died.
The biggest limitation I have is running fusion360 is terribly slow when parts get complicated or I have multiple designs open. It's bad enough the my Asus rog laptop is faster and smoother at running fusion than my desktop even though my desktop has a now powerful processor and way more RAM.
So what I'm looking for is something in the sub $100 range that's better than what I have and will be better for fusion. I realize thats a pretty wide margin, but that's all the stipulations I have. I'm completely open to second hand cards of off eBay as well. I know that sometimes yesterday's to end card is better than today's economy hardware.
Thanks
Does it actually travel down with the quill or is it stationary? It's obviously powered by the belts. My guess is it's a 2nd op quill and that one is either pops out slugs that have been cut but may leave hanging Chad, or it's simply a smaller deburrer than what's in the main quill.
The motor will be printed with a frame number. You can match up the hp, frame number, and shaft diameter and it should work. Most old lathes came with reversible motors. Not all electric motors can be reversed.
Chances are if it's stopping and starting then you have a bad capacitor. Here's a link on how these motors work and what to look for to fix it https://woodgears.ca/motors/reversing.html