They are recalling the H150 and will exchange them for a fixed version. It's a huge financial loss, though. And I don't want to be the engineer who caused this trouble.
Probably yes, if you were able to unscrew the head (they use very good glue). Also there are several other components at the battery side of the driver. Lastly there's always the chance other components fall off from the heat, maybe at the back side.
So yes, it's possible, but difficult. The good thing: You don't have to worry about it, Skilhunt is recalling the H150 and will exchange them for a fixed version!
Reading a voltage would be possible (but the ADC code is already very complex and messy). Some types of drivers have a sense resistor already, but usually it is connected to an opamp and adding another load might cause visible fluctuations in the output.
So yes, it could be possible, but requires a driver redesign and lots of refactoring of Anduril.
It looks like a rebranded Yinding or Rayten LED that is already used for a while in other flashlights. It's definitely not their own development or production.
As already mentioned, this is the post-off voltage display. Depending on your firmware version, its time can be changed from the battcheck menu. Set to 0 to turn it off.
The red flash is a bug that already got fixed (together with several other bugs). Do you have a flashing kit for updating the firmware?
The IF19 is mostly identical with a slightly different design, without Anduril and without aux LEDs. But performance should be the same. I think the battery tubes will be compatible, but I don't have an IF19 to try it out.
I always have a thrower with me to see what's happening at the end of a path. The TS11 works great for this. I don't need much runtime for the few short bursts of light, but the small TS11 is very handy and doesn't need much space.
Indeed, this is far from perfect, but on the other hand it's also not angry blue, more a pure white and without green tint. For a thrower I find it kind of acceptable.
While Luminus has announced warmer SFT-40, I'm not sure if they are even released yet.
I’m gonna need you to list all of the lights that these clips go with /s
That's actually pretty easy. Whenever I add a clip, I write the name of the flashlight with a marker on the inside of the clip. I started this practice after about 20 clips in a box and I had to look at photos online to match them to their lights.
Lanyards are bundled with a large carabiner, I always make my own. Only o-rings are nicely organized alphabetically in labeled zip lock bags. You don't know when you quickly need a fresh new rubber…
SammysHP @ SammysHP @feddit.de Posts 19Comments 54Joined 2 yr. ago
In Germany we have them everywhere. When I look out the window I see at least 10 of them.
https://de.wikipedia.org/wiki/Hinweisschilder_zu_Stra%C3%9Feneinbauten