Skip Navigation
The $700 PS5 Pro doesn’t come with a disc drive
  • Another big problem imo is also that you effectively lose ownership of your games. Inevitably, servers would be shut down and you wouldn't be able to download the games that you own. And that's if things go well. Some games could always just go away earlier as we've seen on other platforms. However, if you own the disk, then that's that, you can play the game forever.

    On steam, the same problem could technically happen, but I trust Steam significantly more. It's very much in their best interest to keep growing their library of games and not stop supporting them. I still have games from 10+ years ago on it and I expect to keep them 10+ years from now.

  • Can't connect to server after updating to 10.9.9
  • Actually, I managed to fix the issue. Tbh, idk why/how this fixed it and perhaps I should've mentioned this as well, but I have tailscale set up on my server to allow remote connections. I was connecting to the server through tailscale even though I'm in the local network. This should work just fine and has in the past, but perhaps it doesn't when first signing into a fresh install. I disabled tailscale on my client and retried and that worked. I was able to reattempt the install wizard, completed it, and now have a working server once again.

    I haven't yet validated playback as my library is being rescanned now, but I'm at least able to navigate. I'm also unsure why I was able to attempt the wizard before just for it to get stuck...

    Thanks for the help! Your swift responses have been appreciated and I learned a good bit :)

  • Can't connect to server after updating to 10.9.9
  • Just in case, I tried fixing the permissions anyway with sudo chown user:salsa /config/config/migration.xml. However, this gives another error: chown: invalid user: 'user:salsa'. Even though it is a valid user and shows up when checking getent passwd | grep 'salsa'

  • Can't connect to server after updating to 10.9.9
  • So, I'm connected through SSH as the admin user. Lets call it salsa. When calling docker run, I passed the --user 1000:1000, which matches salsa. This actually results in the browser not even finding jellyfin. Returning some 4xx (probably 401).

    However, originally I was running docker run without the --user field, which yields the result I mentioned before. Where it shows Jellyfin, lists the server, but then fails to connect.

    From this, docker logs show no errors:

    spoiler
    • [09:03:41] [INF] [1] Main: Jellyfin version: 10.9.9
    • [09:03:41] [INF] [1] Main: Environment Variables: ["[JELLYFIN_FFMPEG, /usr/lib/jellyfin-ffmpeg/ffmpeg]", "[JELLYFIN_DATA_DIR, /config]", "[JELLYFIN_CONFIG_DIR, /config/config]", "[JELLYFIN_WEB_DIR, /jellyfin/jellyfin-web]", "[JELLYFIN_LOG_DIR, /config/log]", "[JELLYFIN_CACHE_DIR, /cache]"]
    • [09:03:41] [INF] [1] Main: Arguments: ["/jellyfin/jellyfin.dll"]
    • [09:03:41] [INF] [1] Main: Operating system: Debian GNU/Linux 12 (bookworm)
    • [09:03:41] [INF] [1] Main: Architecture: X64
    • [09:03:41] [INF] [1] Main: 64-Bit Process: True
    • [09:03:41] [INF] [1] Main: User Interactive: True
    • [09:03:41] [INF] [1] Main: Processor count: 8
    • [09:03:41] [INF] [1] Main: Program data path: /config
    • [09:03:41] [INF] [1] Main: Log directory path: /config/log
    • [09:03:41] [INF] [1] Main: Config directory path: /config/config
    • [09:03:41] [INF] [1] Main: Cache path: /cache
    • [09:03:41] [INF] [1] Main: Web resources path: /jellyfin/jellyfin-web
    • [09:03:41] [INF] [1] Main: Application directory: /jellyfin/
    • [09:03:41] [INF] [1] Jellyfin.Server.Migrations.MigrationRunner: Marking following migrations as applied because this is a fresh install: ["CreateNetworkConfiguration", "MigrateMusicBrainzTimeout", "MigrateNetworkConfiguration"]
    • [09:03:41] [INF] [1] Emby.Server.Implementations.AppBase.BaseConfigurationManager: Setting cache path: /cache
    • [09:03:41] [INF] [1] Emby.Server.Implementations.ApplicationHost: Loading assemblies
    • [09:03:41] [INF] [1] Jellyfin.Networking.Manager.NetworkManager: Defined LAN subnets: ["127.0.0.1/8", "10.0.0.0/8", "172.16.0.0/12", "192.168.0.0/16"]
    • [09:03:41] [INF] [1] Jellyfin.Networking.Manager.NetworkManager: Defined LAN exclusions: []
    • [09:03:41] [INF] [1] Jellyfin.Networking.Manager.NetworkManager: Used LAN subnets: ["127.0.0.1/8", "10.0.0.0/8", "172.16.0.0/12", "192.168.0.0/16"]
    • [09:03:41] [INF] [1] Jellyfin.Networking.Manager.NetworkManager: Filtered interface addresses: ["127.0.0.1", "10.0.0.23", "100.64.37.178"]
    • [09:03:41] [INF] [1] Jellyfin.Networking.Manager.NetworkManager: Bind Addresses ["0.0.0.0"]
    • [09:03:41] [INF] [1] Jellyfin.Networking.Manager.NetworkManager: Remote IP filter is Allowlist
    • [09:03:41] [INF] [1] Jellyfin.Networking.Manager.NetworkManager: Filtered subnets: []
    • [09:03:42] [INF] [1] Emby.Server.Implementations.Plugins.PluginManager: Loaded plugin: TMDb 10.9.9.0
    • [09:03:42] [INF] [1] Emby.Server.Implementations.Plugins.PluginManager: Loaded plugin: Studio Images 10.9.9.0
    • [09:03:42] [INF] [1] Emby.Server.Implementations.Plugins.PluginManager: Loaded plugin: OMDb 10.9.9.0
    • [09:03:42] [INF] [1] Emby.Server.Implementations.Plugins.PluginManager: Loaded plugin: MusicBrainz 10.9.9.0
    • [09:03:42] [INF] [1] Emby.Server.Implementations.Plugins.PluginManager: Loaded plugin: AudioDB 10.9.9.0
    • [09:03:42] [INF] [1] Jellyfin.Server.Migrations.MigrationRunner: Marking following migrations as applied because this is a fresh install: ["DisableTranscodingThrottling", "CreateLoggingConfigHeirarchy", "MigrateActivityLogDatabase", "RemoveDuplicateExtras", "MigrateUserDatabase", "MigrateDisplayPreferencesDatabase", "RemoveDownloadImagesInAdvance", "MigrateAuthenticationDatabase", "FixPlaylistOwner", "MigrateRatingLevels", "FixAudioData"]
    • [09:03:42] [INF] [1] Main: Kestrel is listening on 0.0.0.0
    • [09:03:42] [WRN] [1] Microsoft.AspNetCore.DataProtection.KeyManagement.XmlKeyManager: No XML encryptor configured. Key {088145f8-6aa5-420c-b690-406299d35e5b} may be persisted to storage in unencrypted form.
    • [09:03:43] [WRN] [1] Microsoft.AspNetCore.StaticFiles.StaticFileMiddleware: The WebRootPath was not found: /wwwroot. Static files may be unavailable.
    • [09:03:43] [INF] [1] Emby.Server.Implementations.ApplicationHost: Running startup tasks
    • [09:03:43] [INF] [1] Emby.Server.Implementations.ScheduledTasks.TaskManager: Daily trigger for Generate Trickplay Images set to fire at 2024-08-08 03:00:00.000 +00:00, which is 17:56:16.5092379 from now.
    • [09:03:43] [INF] [1] Emby.Server.Implementations.ScheduledTasks.TaskManager: Daily trigger for Extract Chapter Images set to fire at 2024-08-08 02:00:00.000 +00:00, which is 16:56:16.5067972 from now.
    • [09:03:43] [INF] [1] MediaBrowser.MediaEncoding.Encoder.MediaEncoder: Found ffmpeg version 6.0.1
    • [09:03:43] [INF] [1] MediaBrowser.MediaEncoding.Encoder.MediaEncoder: Available decoders: ["libdav1d", "av1", "av1_cuvid", "av1_qsv", "h264", "h264_qsv", "h264_cuvid", "hevc", "hevc_qsv", "hevc_cuvid", "mpeg2video", "mpeg2_qsv", "mpeg2_cuvid", "mpeg4", "mpeg4_cuvid", "msmpeg4", "vc1_qsv", "vc1_cuvid", "vp8", "libvpx", "vp8_cuvid", "vp8_qsv", "vp9", "libvpx-vp9", "vp9_cuvid", "vp9_qsv", "aac", "ac3", "dca", "flac", "mp3", "truehd"]
    • [09:03:43] [INF] [1] MediaBrowser.MediaEncoding.Encoder.MediaEncoder: Available encoders: ["libsvtav1", "av1_nvenc", "av1_qsv", "av1_amf", "av1_vaapi", "libx264", "h264_amf", "h264_nvenc", "h264_qsv", "h264_v4l2m2m", "h264_vaapi", "libx265", "hevc_amf", "hevc_nvenc", "hevc_qsv", "hevc_vaapi", "mjpeg_qsv", "mjpeg_vaapi", "mpeg4", "msmpeg4", "libvpx", "libvpx-vp9", "aac", "libfdk_aac", "ac3", "alac", "dca", "flac", "libmp3lame", "libopus", "truehd", "libvorbis", "srt"]
    • [09:03:43] [INF] [1] MediaBrowser.MediaEncoding.Encoder.MediaEncoder: Available filters: ["deinterlace_qsv", "deinterlace_vaapi", "hwupload_cuda", "hwupload_vaapi", "libplacebo", "overlay_opencl", "overlay_qsv", "overlay_vaapi", "overlay_vulkan", "overlay_cuda", "procamp_vaapi", "scale_cuda", "scale_opencl", "scale_qsv", "scale_vaapi", "scale_vulkan", "tonemap_cuda", "tonemap_opencl", "tonemap_vaapi", "vpp_qsv", "yadif_cuda", "zscale", "alphasrc"]
    • [09:03:43] [INF] [1] MediaBrowser.MediaEncoding.Encoder.MediaEncoder: Available hwaccel types: ["cuda", "vaapi", "qsv", "drm", "opencl", "vulkan"]
    • [09:03:44] [INF] [1] MediaBrowser.MediaEncoding.Encoder.MediaEncoder: FFmpeg: /usr/lib/jellyfin-ffmpeg/ffmpeg
    • [09:03:44] [INF] [1] Emby.Server.Implementations.ApplicationHost: ServerId: 20accacd2d674450b3c157b6f96d5533
    • [09:03:44] [INF] [1] Emby.Server.Implementations.ApplicationHost: Core startup complete
    • [09:03:44] [INF] [1] Main: Startup complete 0:00:03.0145715
    • [09:03:46] [INF] [16] Emby.Server.Implementations.ScheduledTasks.TaskManager: Clean up collections and playlists Completed after 0 minute(s) and 0 seconds
    • [09:03:47] [INF] [10] Emby.Server.Implementations.ScheduledTasks.TaskManager: Update Plugins Completed after 0 minute(s) and 1 seconds

    EDIT: Also, with this, ~/jellyfin/config/logs is still showing no new logs.

  • Can't connect to server after updating to 10.9.9
  • Oh! I wasn't aware of these logs. Yep, I'm seeing an error repeating many times here: "Unhandled exception. System.UnauthorizedAccessException: Access to the path '/config/config/migrations.xml' is denied."

  • Can't connect to server after updating to 10.9.9
  • These are the last logs before they stopped showing up:

    spoiler
    • [2024-08-07 06:38:53.717 +00:00] [WRN] [11] Microsoft.EntityFrameworkCore.Model.Validation: The entity type '"AccessSchedule"' is configured to use schema '"jellyfin"', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
    • [2024-08-07 06:38:53.718 +00:00] [WRN] [11] Microsoft.EntityFrameworkCore.Model.Validation: The entity type '"ActivityLog"' is configured to use schema '"jellyfin"', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
    • [2024-08-07 06:38:53.718 +00:00] [WRN] [11] Microsoft.EntityFrameworkCore.Model.Validation: The entity type '"CustomItemDisplayPreferences"' is configured to use schema '"jellyfin"', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
    • [2024-08-07 06:38:53.718 +00:00] [WRN] [11] Microsoft.EntityFrameworkCore.Model.Validation: The entity type '"DisplayPreferences"' is configured to use schema '"jellyfin"', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
    • [2024-08-07 06:38:53.718 +00:00] [WRN] [11] Microsoft.EntityFrameworkCore.Model.Validation: The entity type '"HomeSection"' is configured to use schema '"jellyfin"', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
    • [2024-08-07 06:38:53.718 +00:00] [WRN] [11] Microsoft.EntityFrameworkCore.Model.Validation: The entity type '"ImageInfo"' is configured to use schema '"jellyfin"', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
    • [2024-08-07 06:38:53.718 +00:00] [WRN] [11] Microsoft.EntityFrameworkCore.Model.Validation: The entity type '"ItemDisplayPreferences"' is configured to use schema '"jellyfin"', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
    • [2024-08-07 06:38:53.718 +00:00] [WRN] [11] Microsoft.EntityFrameworkCore.Model.Validation: The entity type '"Permission"' is configured to use schema '"jellyfin"', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
    • [2024-08-07 06:38:53.718 +00:00] [WRN] [11] Microsoft.EntityFrameworkCore.Model.Validation: The entity type '"Preference"' is configured to use schema '"jellyfin"', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
    • [2024-08-07 06:38:53.718 +00:00] [WRN] [11] Microsoft.EntityFrameworkCore.Model.Validation: The entity type '"ApiKey"' is configured to use schema '"jellyfin"', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
    • [2024-08-07 06:38:53.718 +00:00] [WRN] [11] Microsoft.EntityFrameworkCore.Model.Validation: The entity type '"Device"' is configured to use schema '"jellyfin"', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
    • [2024-08-07 06:38:53.718 +00:00] [WRN] [11] Microsoft.EntityFrameworkCore.Model.Validation: The entity type '"DeviceOptions"' is configured to use schema '"jellyfin"', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
    • [2024-08-07 06:38:53.718 +00:00] [WRN] [11] Microsoft.EntityFrameworkCore.Model.Validation: The entity type '"User"' is configured to use schema '"jellyfin"', but SQLite does not support schemas. This configuration will be ignored by the SQLite provider.
    • [2024-08-07 06:39:17.228 +00:00] [INF] [10] Jellyfin.Networking.Manager.NetworkManager: Defined LAN addresses : "* [10.0.0.0/8,172.16.0.0/12,192.168.0.0/16]"
    • [2024-08-07 06:39:17.228 +00:00] [INF] [10] Jellyfin.Networking.Manager.NetworkManager: Defined LAN exclusions : "[]"
    • [2024-08-07 06:39:17.229 +00:00] [INF] [10] Jellyfin.Networking.Manager.NetworkManager: Using LAN addresses: "[10.0.0.0/8,172.16.0.0/12,192.168.0.0/16]"
    • [2024-08-07 06:39:18.297 +00:00] [INF] [20] Emby.Dlna.DlnaManager: No matching device profile found. The default will need to be used. DeviceIdentification { FriendlyName: "Aquaria", ModelNumber: "1.0", SerialNumber: "", ModelName: "LG TV", ModelDescription: "LG WebOSTV DMRplus", ModelUrl: "", Manufacturer: "LG Electronics.", ManufacturerUrl: "http://www.lge.com", Headers: [] }
    • [2024-08-07 06:39:18.303 +00:00] [INF] [20] Emby.Dlna.Main.DlnaEntryPoint: DLNA Session created for "Aquaria" - "LG TV"
    • [2024-08-07 06:39:19.233 +00:00] [INF] [20] Jellyfin.Networking.Manager.NetworkManager: Defined LAN addresses : "[10.0.0.0/8,172.16.0.0/12,192.168.0.0/16]"
    • [2024-08-07 06:39:19.233 +00:00] [INF] [20] Jellyfin.Networking.Manager.NetworkManager: Defined LAN exclusions : "[]"
    • [2024-08-07 06:39:19.234 +00:00] [INF] [20] Jellyfin.Networking.Manager.NetworkManager: Using LAN addresses: "[10.0.0.0/8,172.16.0.0/12,192.168.0.0/16]"
    • [2024-08-07 06:39:21.232 +00:00] [INF] [8] Jellyfin.Networking.Manager.NetworkManager: Defined LAN addresses : "[10.0.0.0/8,172.16.0.0/12,192.168.0.0/16]"
    • [2024-08-07 06:39:21.232 +00:00] [INF] [8] Jellyfin.Networking.Manager.NetworkManager: Defined LAN exclusions : "[]"
    • [2024-08-07 06:39:21.232 +00:00] [INF] [8] Jellyfin.Networking.Manager.NetworkManager: Using LAN addresses: "[10.0.0.0/8,172.16.0.0/12,192.168.0.0/16]"
    • [2024-08-07 06:39:23.237 +00:00] [INF] [11] Jellyfin.Networking.Manager.NetworkManager: Defined LAN addresses : "[10.0.0.0/8,172.16.0.0/12,192.168.0.0/16]"
    • [2024-08-07 06:39:23.237 +00:00] [INF] [11] Jellyfin.Networking.Manager.NetworkManager: Defined LAN exclusions : "[]"
    • [2024-08-07 06:39:23.237 +00:00] [INF] [11] Jellyfin.Networking.Manager.NetworkManager: Using LAN addresses: "[10.0.0.0/8,172.16.0.0/12,192.168.0.0/16]"
    • [2024-08-07 06:39:25.240 +00:00] [INF] [11] Jellyfin.Networking.Manager.NetworkManager: Defined LAN addresses : "[10.0.0.0/8,172.16.0.0/12,192.168.0.0/16]"
    • [2024-08-07 06:39:25.240 +00:00] [INF] [11] Jellyfin.Networking.Manager.NetworkManager: Defined LAN exclusions : "[]"
    • [2024-08-07 06:39:25.240 +00:00] [INF] [11] Jellyfin.Networking.Manager.NetworkManager: Using LAN addresses: "[10.0.0.0/8,172.16.0.0/12,192.168.0.0/16]"
    • [2024-08-07 06:45:16.881 +00:00] [INF] [2] Main: Received a SIGTERM signal, shutting down
    • [2024-08-07 06:45:16.881 +00:00] [INF] [2] Main: Running query planner optimizations in the database... This might take a while
    • [2024-08-07 06:45:16.888 +00:00] [INF] [2] Emby.Server.Implementations.ApplicationHost: Disposing "CoreAppHost"
    • [2024-08-07 06:45:16.889 +00:00] [INF] [2] Emby.Server.Implementations.ApplicationHost: Disposing "UserDataChangeNotifier"
    • [2024-08-07 06:45:16.889 +00:00] [INF] [2] Emby.Server.Implementations.ApplicationHost: Disposing "ExternalPortForwarding"
    • [2024-08-07 06:45:16.890 +00:00] [INF] [2] Emby.Server.Implementations.EntryPoints.ExternalPortForwarding: Stopping NAT discovery
    • [2024-08-07 06:45:16.892 +00:00] [INF] [2] Emby.Server.Implementations.ApplicationHost: Disposing "DlnaEntryPoint"
    • [2024-08-07 06:45:16.892 +00:00] [INF] [2] Emby.Dlna.Main.DlnaEntryPoint: Disposing PlayToManager
    • [2024-08-07 06:45:16.893 +00:00] [INF] [2] Emby.Dlna.Main.DlnaEntryPoint: Disposing DeviceDiscovery
    • [2024-08-07 06:45:16.893 +00:00] [INF] [2] Emby.Dlna.Main.DlnaEntryPoint: Disposing SsdpCommunicationsServer
    • [2024-08-07 06:45:16.893 +00:00] [INF] [2] Emby.Dlna.Main.DlnaEntryPoint: "SsdpCommunicationsServer" disposing _BroadcastListenSocket
    • [2024-08-07 06:45:16.895 +00:00] [INF] [2] Emby.Dlna.Main.DlnaEntryPoint: "SsdpCommunicationsServer" Disposing 3 sendSockets
    • [2024-08-07 06:45:16.895 +00:00] [INF] [2] Emby.Dlna.Main.DlnaEntryPoint: "SsdpCommunicationsServer" disposing sendSocket from "0.0.0.0"
    • [2024-08-07 06:45:16.895 +00:00] [INF] [2] Emby.Dlna.Main.DlnaEntryPoint: "SsdpCommunicationsServer" disposing sendSocket from "10.0.0.23"
    • [2024-08-07 06:45:16.895 +00:00] [INF] [2] Emby.Dlna.Main.DlnaEntryPoint: "SsdpCommunicationsServer" disposing sendSocket from "127.0.0.1"
    • [2024-08-07 06:45:16.895 +00:00] [INF] [2] Emby.Server.Implementations.ApplicationHost: Disposing "MusicBrainzAlbumProvider"
    • [2024-08-07 06:45:16.895 +00:00] [INF] [2] Emby.Server.Implementations.ApplicationHost: Disposing "DeviceAccessEntryPoint"
    • [2024-08-07 06:45:16.895 +00:00] [INF] [2] Emby.Server.Implementations.ApplicationHost: Disposing "EntryPoint"
    • [2024-08-07 06:45:16.895 +00:00] [INF] [2] Emby.Server.Implementations.ApplicationHost: Disposing "EntryPoint"
    • [2024-08-07 06:45:16.895 +00:00] [INF] [2] Emby.Server.Implementations.ApplicationHost: Disposing "NotificationEntryPoint"
    • [2024-08-07 06:45:16.896 +00:00] [INF] [2] Emby.Server.Implementations.ApplicationHost: Disposing "EmbyTV"
    • [2024-08-07 06:45:16.897 +00:00] [INF] [2] Emby.Server.Implementations.ApplicationHost: Disposing "SchedulesDirect"
    • [2024-08-07 06:45:16.897 +00:00] [INF] [2] Emby.Server.Implementations.ApplicationHost: Disposing "LibraryChangedNotifier"
    • [2024-08-07 06:45:16.898 +00:00] [INF] [2] Emby.Server.Implementations.ApplicationHost: Disposing "RecordingNotifier"
    • [2024-08-07 06:45:16.899 +00:00] [INF] [2] Emby.Server.Implementations.ApplicationHost: Disposing "UdpServerEntryPoint"
    • [2024-08-07 06:45:16.899 +00:00] [INF] [2] Emby.Server.Implementations.ApplicationHost: Disposing "LibraryMonitorStartup"
  • Can't connect to server after updating to 10.9.9

    As the title says, I just upgraded to 10.9.9 and now I can't connect to the server. I have it installed on a docker container on a headless ubuntu machine. This is the first time I've updated after installing and successfully using the server for several months. I followed the instructions in the first response here: link

    Originally, the update/install seemed to work just fine. I opened up a client on a browser and it successfully connected and prompted the install wizard. So I went through it and re-pointed to all of my media. However, at the very last step when clicking submit, it got stuck. I saw online that this happened to others and what worked for them was to just try again.

    So, after some time, I restarted the server and restarted the above process, except now I'm unable to connect at all.

    When trying to connect from my Nvidia Shield, it tells me to complete the setup on a browser. When connecting on a browser, it asks me to select a server, lists the server, and then fails to connect to it with the error "We're unable to connect to the selected server right now. Please ensure it is running and try again". Connecting on my android phone and connecting in incognito prompts the same error.

    Also, I'm unable to see any new logs now. ~/jellyfin/config/log has 3 log files from the last 3 days. But the latest one seems to have stopped around the time of the upgrade and shows no errors. I've updated the logging.json file as per the instructions here and this does not help: debug-logging

    Does anyone have any advice here?

    UPDATE: Issue seems to be solved. Tailscale seemed to be causing some problem on the client-side. Disabling and reattempting seemed to work. The library is still being scanned, so I haven't validated playback. But I can at least navigate my content now.

    UPDATE 2: Playback is validated

    13
    Lithium-Ion Batteries Have Gone Too Far
  • I feel like the real problem isn't Lithium-Ion batteries, but specifically non-removable Li-ion batteries. With some devices, non-removable isn't as huge of a deal, but with other items such as headphones, mice, and gamepads, I'd rather have AA batteries than non-removable Li-ion. In the event that a battery dies while using the device, having to tether yourself sucks. Whereas taking 2 seconds to swap the battery is simple and quick.

    Now, the best of both worlds is just a removable Li-Ion battery. That way you can charge overnight, and just swap to another battery when it unexpectedly dies. My headset does that and I love it. Similarly, I used to have that with my LG G4 and it was amazing. This combo yields the best convenience and is best for the environment as you don't need to recycle as many batteries or replace the whole product when the non-removable battery starts dying too quickly.

  • Are you supposed to be able to hear your microphone in your headphones even when no programs are open?
  • I see in the other comments that you have sidetone disabled in the OS. Are you certain you didn't install any software when using the headset? If so, could you try using the headset with another pc or your phone and see if it still happens?

  • When playing Jellyfin off an Nvidia Shield TV, is it possible to set a default external video player per TV series?

    As the title says, is it possible to set the default video player to use per TV series? I tend to switch between MXPlayer and JustPlayer depending on the content (JustPlayer for most content and MXPlayer for some sub heavy content). However, it's annoying to have to select the player every time I start an episode. Additionally, this makes playing a show on shuffle in the background pretty tedious.

    Would it be possible to have it so that show A always just plays using JustPlayer and show B always plays using MXPlayer?

    7
    InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)GE
    GeekySalsa @lemmy.world
    Posts 2
    Comments 40