Well thanks to the soon to be dead /r/selfhosted on reddit I started selfhosting few years ago and now approximately 90% of my stuff is selfhosted:

• Gitlab
• RocketChat
• VS Code
• Anonaddy
• Etherpad
• Min.io
• Archivebox
• FreshRSS
• FileStash
• Matomo
• InfiniteWP
• piHole

as daily drivers and several others that I use from time to time.

@devve

- Nextcloud
- Miniflux
- Gitlab
- HomeAssistant
- Wallabag
- Ghost (for my personal blog)
- Umami analytics
- Searx NG
- OnlyOffice document server
- ntfy
- Lychee
- LAMP Stack
- TheLounge (IRC web client)
- Cockpit (server manager)
- RSSHub
- Jellyfin
- Adguard

On an Intel NUC in my closet.

vSphere cluster on 3 HP Mini EliteDesks:

• 2x PiHole servers with local unbound resolver; synced with Gravity Sync
• 3x Active Directory DCs
• Homebridge Instance
• Jenkins Instance
• Portainer Instance Hosting:
  • Authelia
  • Code Server
  • CyberChef
  • Guacamole
  • NGINX Proxy Manager
  • PairDrop
  • SMEE Client
  • Your Spotify
  • Docker-SMTP
  • Vaultwarden
  • A couple of personal websites using NGINX
• Kubernetes (k3s) (3 Managers, 6 Workers) Hosting:
  • ArgoCD
  • AWX
  • Rook Ceph
  • Cloudflared
  • My main personal website using a container image built with Jenkins and deployed with ArgoCD.

---

Standalone Lenovo TS140:

• Plex (GTX 1650 Super for Transcoding)
• SABnzbd
• Radarr
• Sonarr
• Ombi
• Tautulli
• MP4 Automator
• Veeam B&R for backing up vSphere hosts.

---

Synology DS1821+:

• 64TB Raw, 2TB NVMe Cache
• MeTube
• Backup Sync to Google Drive

---

Misc:

• RIPE Atlas Probe
• All networking gear is Unifi. UDM Pro, USW Aggregation, USW Pro 48 PoE, U6 Pro, U6 In-Wall, 3 USW Flex Minis. 10G SFP+ connections between UDM Pro and switches.

• Audiobookshelf
• Calckey
• Gitea
• Grafana + Prometheus
• Homeassistant
• Jellyfin
• KitchenOwl
• Navidrome
• Nextcloud
• Wallabag

and lemmy of course 🙂

If this comment is federating then I started hosting my first service -- Lemmy itself.

Hello

Let's have a look at the inventory

• RPI 4B

  • OpenHab (Openhabian actually, so some additional services like Zigbee2MQTT or Grafana)

• HP EliteDesk 800 G2 i5-6500T, 8GiB RAM - this one is currently the mainstay of my lab, running containers with docker-compose

  • Nginx as reverse proxy (+ fail2ban, letsencrypt)
  • Paperless-ngx (+ Redis, Tika, Gotenberg)
  • Jellyfin
  • Minecraft server (+ Mapcrafter)
  • ddclient
  • Heimdall

• Dell OptiPlex 7060 Micro i7-8700T 32GiB RAM

  • I've gotten this one fairly recently. A real bargain - costed as much as the CPU alone and was in pristine condition. I will be migrating the workload from EliteDesk to this one. I decided to try ProxMox this time though, so I need to learn a bit first. Also perhaps add a second SSD

Personally I selfhost codimd, vaultwarden, kuma, immich, home assistant, trilium, hugo, gotify, wakapi and umami. I have one VPS and one custom built NAS at home.

Been self hosting for over a decade at this point. Mix of custom built servers and surplus hardware over the years.

To name a few of my daily servers.

• home assistant
• paperless-ng
• jellyfin
• nextcloud
• blue iris
• audiobook shelf

With docker being so easy I have kind of lost track how much stuff i am hosting. A problem i never thought i would have :)

Proxmox on a self-built rackserver (Will be building a second one for a proxmox cluster):

• Pi-Hole (primary)
• Home Assistant
• 2 Docker Hosts (One for Eval, one for Prod)

Raspberry Pi Zero for Pi-Hole (secondary)

On my Docker Host (All in docker-compose):

• Heimdall (Personal Dashboard)
• Portainer (Docker GUI)
• baikal (CAL & CADdav)
• vaultwarden (Password Manager)
• bookstack (Documentation, kinda abandoned because im lazy)
• changedetection(.)io (Monitoring Websites for Changes, useful for changelogs or price monitoring)
• cloudflare-ddns (DDNS because dynamic IP Adresses...)
• Grafana & InfluxDB (Dashboard and Database for Stats)
• linkding (Bookmarks aka "Have to read someday")
• mealie (Reciepe manager)
• neko (Watch2gether but in selfhosted and more capable imo)
• nginx proxy manager (Reverse Proxy with GUI)
• paperless-ngx (Document manager with OCR)
• semaphore ui (Ansible GUI with sheduled tasks)
• Uptime Kuma (Status Monitoring)
• watchtower (Automatic updates of my docker containers because im lazy)

A Synology DS220+ for local Storage

A 5TB Hetzner Storage Box for Backups (encrypted)

A Rootserver for Games and some testing in the wild (Currently Windows, will be switched to ubuntu)

Hetzner Cloud Server with mailcow on it

I have a used Lenovo Thinkcentre mini with an i3-7100T and 16gb RAM. I have Ubuntu server LTS installed on it and I run everything in docker containers.

I host:

• jellyfin server for my friends and family
• qbittorrent to download for the JF server(behind a VPN)
• Jellyseerr for requests
• Jackett, Sonarr, and Radarr for downloads
• a Minecraft server

Host all the things!

Wordpress, SMTP/IMAP, tor, bittorrent, Nextcloud, Plex, NTP, photo galleries, DoT...

I even started hosting the website for my local Italian restaurant and they haven't even realised it yet.

I have a rented server with 8 Xeon E3-1246 and 64GB at Hetzner where I host:

• Vaultwarden
• Gitlab (git repo, container registry, static blog (pages with Hugo))
• Drawio (Diagrams)
• Kroki (for Gitlab)
• Gitlab runner
• FreshRSS
• Nextcloud
• Redis
• Headscale (Tailscale server)
• Keycloak
• MariaDB
• PostgreSQL
• Plex
• Privacybin
• Wallabag
• Hedgedoc

It's all behind a Traefik instance handling Let's Encrypt and using the Docker socket to route traffic based on labels in docker-compose.yml. Behind these I also run k3s and from time to time some VMs. I also have a 1TB storage pod at Hetzner where I use restic to back everything up from this instance as well as from my home system and laptops.

i don't self-host yet, but i have an old pc in my house, i just need to bring it with me to colege, so i can learn and start self-hosting

home assistant, freshrss (and a few related services such as rss-bridge), nitter and piped. I tried to host libregrammar, but ran out of memory.

• jellyfin and Plex (in the process of migrating)
• radarr/sonarr
• jackett and deluge
• nextcloud

I've had new hardware in the basement now for a while, going to slap it together and build a k8s cluster on top of rancher/harvester

I've got a couple VPSes, hosting

• Mailcow, because email is identity.
• Asterisk, because phone #s are also identity.
• Matrix-Synapse, for personal messaging even though XMPP is probably better.
• ttrss, even though it's junk software with a jerk developer.
• A bunch of self-developed web apps

Self hosting email is obnoxious, but it's also one of the only remnants of the traditional distributed internet that's still broadly accepted.

Hello selfhosters.

Here's my list of stuff:

On a VPS hosted in Germany:

• Nextcloud
• Mailcow for my own domain
• A blog (https://www.ninjazumbi.com)
• Wallabag
• FreshRSS
• WireGuard VPN

On my home server (my old gaming PC, repurposed)

• Proxmox to manage several containers/VMs:
  • OPNsense Firewall
  • HomeAssistant
  • Pihole
  • Gitlab
  • Jellyfin

I joined to learn, still not self-hosting anything, but I intend to use an 11yo Compaq laptop (i5, 8GB RAM, 1TB HDD) as a server while I'm still practicing. I intend to self-host a lemmy instance and a nextcloud server.

Thanks for everything you guys have been sharing I've already got some good leads, gonna try out YunoHost for starters

Dedicated Raspberry Pi4 running Home Assistant on an M.2 SATA SSD.

Custom built server in Lian-Li PC-D600 case. 3x5 Drive SATA backplane. OpenMediaVault is the server software. Following is running in Docker:

• Nextcloud
• Jellyfin
• Grocy
• Snap-IT
• Photoprism
• Onlyoffice Document Server
• Netdata
• Motioneye
• Ombi
• TiddlyWiki
• Adguard
• Audiobookshelf
• Jellystat
• OpenVPN
• Vaultwarden
• DailyTXT
• Papermerge

Hosting a whole bunch of stuff for myself, the family and also the public. For the larger family I'm hosting eMail but using a managed service offering for that (Hetzner). Too old to run my own IMAP/SMTP infrastructure ;)

For a few private societies I'm hosting:

• Mattermost
• NextCloud
• WordPress https://www.uckermark-blog.de/

For the public I host:

• Mastodon at https://hub.uckermark.social
• Mastodon at https://tetrax.de/
• BookWyrm at https://books.mxhdr.net/
• Mobilizon at https://termine.uckermark.social/
• MatrixChat at https://matrix.mxhdr.net
• Element WebUI for Matrix at https://element-web.explain-it.org/

Mostly formyself, but not restricted I'm hosting:

• Pixelfed
• LinkDing for Bookmarks
• Excalidraw
• Grafana
• OverLeaf
• StandardNotes Server
• PiHole
• GitTea
• FreshRSS
• Minio S3-kompatible Object Storage as Backend for Mastodon & Pixelfed (on an old Dell Optiplex at home over my DSL Line)
• GoToSocial Fediverse Client (On a RaspberryPi at home)
• PeerTube for public projects (on the same old Dell OptiPlex)
• PeerTube as private Video Streaming platform (on a Dell Precision 3500 tower)

Most services run in Docker Containers on some VPS at Hetzner. Some stuff runs in Docker Containers on old spare hardware at home.

I run a bunch of bots, some databases plus

• Jellyfin
• Unifi controller
• Radar
• Sonarr
• Lidarr
• Bazarr
• nzbhydra2
• Sabnzbd
• Heimdall
• Twitch points miner 2

I have a MediaWiki instance on my laptop (I've found the features of all other wikis/mindmaps/knowledge databases decisively insufficient after having a taste of MW templates, Semantic MediaWiki and Scribunto).

Also some smaller things like pihole-standalone, Jellyfin and dictd.

Since I'm moving very soon I'm also redoing everything, so this more of a "soon-to-be" than a current, but I will have:

3x ryzen 5600 w/ 32gb of ECC ram, 10gb network and some enterprise disks 1x mikrotik switch 1x mikrotik router

And I will host, using Kubernetes (Talos OS):

• ceph
• owncloud infinite scale
• Immich
• Jellyfin
• Homeassistant
• Hashicorp vault
• Oneuptime
• gitea
• plane
• actual (finance software)
• probably forgetting some stuff

Lemmy, mostly :D. I also recently started up my own Matrix home server. I took a stab at email, but it was more trouble than it's worth considering my relatively newly acquired cloud hosting IP is on several blacklists. Now that I actually have a server running again Gitea might be next on the list of services that gets added.

A 6 node k3s cluster with a Synology for network storage running:

• Nextcloud
• Authentik SSO
• Paperless
• Vikunja
• Joplin Sync
• Matrix
• Immich
• Mealie
• Gitea
• Home-Assistant
• Node-Red
• Zigbee2mqtt
• MQTT server
• Frigate
• UptimeKuma
• Prometheus and Grafana
• AdGuard Home
• Minio
• Longhorn
• Unifi Controller
• Jellyfin
• Homepage

Managed with FluxCD.

(I'll add links / descriptions later)

I host the following fediverse stuff:

• Lemmy (you're looking at it)
• Mastodon (3 instances)
• Calckey oh sorry, now FireFish
• Pixelfed
• Misskey
• Writefreely
• Funkwhale
• Akkoma (2 instances)
• Peertube

And these are other things I host:

• Kimai2
• Matrix/Synapse
• Silver Bullet
• XWiki (3 instances)
• Cryptpad (2 instances)
• Gitea
• Grafana
• Hedgedoc
• Minecraft
• Nextcloud
• Nginx Proxy Manager
• Paperless-ngx
• TheLounge
• Vaultwarden
• Zabbix
• Zammad

On my own hardware: At home I have a Raspberry Pi 4 running JellyFin as a local media server, also experimenting with PiHole. One of these days I'd like to pull my NextCloud server in-house.

VPS: Nextcloud (including calendar, notes, contacts & RSS/Atom), GoToSocial, WordPress, Gemini, and personal website with a mix of home-grown parts and sections managed through Eleventy.

I've also experimented with self-hosting Calckey , Snac2 and Mastodon, but Mastodon's too heavy for a single user and Snac2 is lighter than I want to go with for now. I may try Calckey again at some point, though.

Eventually I'd like to set up Wallabag and migrate from Pocket.

I have a 800W solar panel and some home automatization at home. Therefor, I use MQTT & NodeRED.

• Adguard
• Authelia (authentication for my services)
• Dashy (I've become lazy collecting my own bookmarks)
• Gotify (receive notifications on my mobile from NodeRED)
• Grafana
• Influxdb
• Jellyfin
• Mariadb
• Nextcloud
• NodeRED
• phpMyAdmin
• Portainer
• Remmina
• sshwifty
• Swag (Nginx and more)
• ubooquity (ebooks)
• Wallabag (Bookmark collection)
• Wordpress (want to try)

Starting to fall down the rabbit hole of self hosting,

Unraid, Plex & Pihole. Next project is Opnsense, then starting to look at Home Assistant.

• arr stacks
• Immich
• Plex
• Adguard
• Home Assistant
• Memos

All of these running on freshly built UNRAID, migrated over from Proxmox over the weekend.

Might need a RSS again seeing the state of Reddit at

Jellyfin and adguard.

All on one system, basically an old Dell Optiplex that I got for free when a company was shutting down. I5 6600 with 16 gb ram.

• Portainer for easy docker management
• Nginx Proxy Manager to provide easy access to the docker containers with SSL

Docker:

• Dashy
• Pihole DNS
• NextCloud
• Slskd (https://github.com/slskd/slskd - web based soulseek client)
• JellyFin
• Tailscale
• Vaultwarden

These are the containers that are running 24/7 but I play around a lot, trying new things :)

So... ODroid N2+ is hosting a Home Assistant. Nothing to add.

I have an old Intel Nuc nuc5cpyh that is currently hosting my WordPress blog at https://some-techy-tinkering.com/. Made it self-hosted a month ago and can't be happier.

The last machine is Intel Nuc nuc7i7bnh with 2 TBs of internal and 4.5 TBs of external drives. This is my main server with:

• Nginx Proxy Manager
• Nextcloud
• Various *arr services
• qBittorrent
• Plex

I'm running a Kubernetes cluster on the Dell hardware, then another single node k8s cluster on the Lenovo, mostly to run Adguard home / DNS in case the big cluster goes down for whatever reason.

Hardware:

• Two Dell r610s, each with 12 cores and 96 GB of RAM, running ESXi 6.7
• Lenovo M900, 4 core, 16 GB RAM, Ubuntu and k3s
• Synology 1515 with 12 TB usable
• Synology 1517 with 32 TB usable
• Juniper SRX 220H (Firewall)
• Juniper EX 2200 48 port switch
• UnFi in-wall WiFi APs

I run the following services, all in Kubernetes, with FluxCD doing GitOps from a repo in GitHub (for now, might move to Gitea later):

• Authentik
• Bookstack
• Calibre
• Flame (Homepage)
• Frigate NVR
• Home Assistant
• Memos
• Monica
• Plex
• Prowlarr
• Radarr
• Rocket Chat
• Sonarr
• Tandoor
• Tautulli
• Unifi
• UptimeKuma
• VS Code
• Zigbee2MQTT

Plex and a web app I wrote for a Twitch community I moderate.

Plex is on a server in the Netherlands and the web app is just AWS. I would've hosted on some spare hardware but my internet is notoriously trash and I didn't want to risk it going down while people are playing in the app.

Plex I might move onto a NAS at some point but I'm just too lazy lol.

I have a two server proxmox cluster (beelink ser5, hp prodesk micro g3) plus running and proxying some services to my daily driver desktop

Services:

• authelia
• caddy
• change dection
• code server
• file browser
• gokapi
• immich
• jellyfin
• jupyter notebook server (for python development)
• kasm
• linkding
• mealie
• nextcloud
• nocodb
• olivetin
• paperless
• portainer
• syncthing
• gluetun
  • radarr, sonarr, jacket
• upsnap
• vaultwarden

Personally, I host Sandstorm, and Discord music bot, and Minecraft.

I only have a few services:

• jellyfin (media server)
• firefly iii (expense manager)
• freshrss (rss aggregator)
• personal telegram bot to auto convert news link to epub for reading in my ereader

All of the service other than jellyfin is hosted on a vps. Jellyfin is hosted from my home and can be accessed remotely via wireguard. However because my isp doesn't provide a public ip, I need to use my vps as wireguard jump host

Client <-> vps <-> home server

Currently self-hosting on an old HP Z600 I bought second hand with the following specs:

• CPU — 2x Intel(R) Xeon(R) CPU X5660 @ 2.80GHz
• RAM — 96GB ECC DDR3 (6*16GB)
• Disks — 4TB HDD for Ubuntu, 10TB HDD for NextCloud and 2TB Sata SSD for Docker

For services, I'm currently running the following:

Docker

• Portainer — CF Tunnel
• FreshRSS — CF Tunnel
• ArchiveBox — CF Tunnel
• Adguard Home — Local
• 2x Uptime Kuma — CF Tunnel
• LinkAce — CF Tunnel
• TheLounge — CF Tunnel
• Watchtower — Local

For public access dockers

• Feedropolis
• Mirotalk SFU
• FiveFilters RSS
• Taiga
• 2x Mattermost Servers
• 8x Wordpress Staging Sites
• 1x Wordpress Dev Sites

For ubuntu, I'm running a few services and apps like:

• ScreamingFrog -9 sites using LAMP stack
• Aria2c with AriaNG
• NextCloud
• Plex
• 4x WebHooks server for communities
• Couple of API end points using Apache reverse proxy
• OpenVPN
• CrowdSec

• Pihole

• Sonarr

• Radarr

• Lidarr

• Notifiarr

• Sabzbd

• Nicotine+

• Kodi

• Plex

• Airsonic

• Nextcloud

• Joplin

• qbittorrent

Currently split between VMs and physicals. I'm refactoring these ,with plans to build out and migrate much of it to a minipc proxmox cluster.

Adding:

• proxmox

• podman/portainer

• unbound

• ngnx proxy mgr

• Solid server

• homepage

• matrix

• searxng

• some sort of mail stack, TBD

• Two NextCloud instances, one is a RPi4 with a big external HDD which I use for backups, the other one contains everything else, including PhoneTrack. Happy to have a self-hosted privacy-friendly way to share my location with family.
• Email using mailcow.
• Jabber server using prosody. Using it with immediate family and two friends. Still super happy.
• Web server including personal blogs. Currently looking to migrate away from Wordpress into something static without comments.
• pihole
• Half-finished home automation stuff.

Always looking for more, but so far it's pretty minimal.

• Pi.hole with Gravity Sync
• openhabian for smarthome hub

Looking to add Jellyfin and a sonarr radarr setup, but my QNAP doesn't like doing actual work so I've been struggling. Planning to add a mini PC soon as a more stable server and to centralize things a bit.

Hey, thanks for the selfhost community!

1u homebrew server

• Docker containers
• Mail server (mail in a box)

Tower server running Freebsd

• Asterisk - jail
• Conduit Matrix server - jail
• Homeassistant - jail
• NFS shares
• Nginx - jail
• Postgres - jail

Greetings!

Not really self hosting a lot right now, but I've been spending a lot of time reengineering my network and fixing some things. Recently retired my loud and power-hungry pfsense server, replacing it with a Mikrotik rb5009, so setting that up has been a steep learning curve.

Most things are running on my Synology DS920+, except for a few raspberry pis.

• Jellyfin (docker)
• Kavita (docker)
• Home Assistant (pi4)
• Paperless-ngx (docker)
• PiHole (pi zero) currently broken
• Unifi controller (docker)
• Grafana (home assistant)
• InfluxDB (docker)
• LibreNMS (VM)

Plex+arrs etc Nextcloud Komga SWAG Photoprism HA

128TB.

My main hypervisor is proxmox which runs an unraid vm with the iGPU passed through to accelerate PLEX and disk controllers to manage the storage. I also have 2 Endeavour OS VMs, one that runs Thunderbird and Insync. Another that has a quadro p2000 passed through to tinker with. I also have a homeassistant vm and a proxmox CT running docker.

I'm working up to transitioning the dockers on unraid to a proxmox container but at the same time if it's not broke why fix it.

I also want to mess with networking by putting in OPNsense or pfsense and routing some traffic through a vps.

A bunch (47 containers at present)... Won't list them here as its kind of redundant with what a lot of other people are running. My latest is Lemmy (lemmy.nine-hells.net).

znc, radicale, miniflux, gotosocial, lemmy, i2pd, searx, rtorrent, webdav

Running Tipi on a five year old chrome box with tailscale as the VPN. Has been running great! Now I'm self hosting

1. Adguard: adblocking inside tailnet & for DNS rewrites
2. Barrage: Nice deluge UI
3. Beszel: Clean & simple server monitoring. I monitor two of my instances & the self hosted setup on this.
4. Beszel Agent: Agent for collecting data for Baszel
5. Deluge: Torrenting
6. Duplicati: Backups with a great UI
7. File Browser: for quick ops
8. Flowise AI: Great drag and drop LLM chat apps builder
9. Immich: The absolute best way to manage pictures
10. Jackett: For the arr stack
11. Jellyfin: Media streaming solution with apps on my phone, TV & laptops
12. Open WebUI: My default LLM chat client now, I no longer pay 20$ for chatGPT but just pay as I go with open webui and chatgpt api key
13. Radarr
14. Sonarr
15. Uptime Kuma: Uptime monitoring for everything
16. Wallos: Subscription management

Tipi is pretty awesome. If you haven't already, check it out!

HARDWARE:

• Dual Xeon E5-2640v3
• Nvidia Quadro P2000 GPU
• 128Gb DDR4 ECC Memory
• 4 x 4tb WD Red plus drives in raidz2 for bulk network storage
• 2 x 500gb WD Red SSD, mirrored for fast network storage
• 2 x 1tb Samsung EVO 870 SSD, mirrored for vms
• 1 x 2tb WD Purple Surveillance Drive
• 1 x 8tb Seagate Barracuda Media Drive

PROXMOX:

• Nginx
• Nextcloud
• Truenas with Backblaze B2 backup
• 2 x WordPress sites
• Home Assistant
• Grafana
• Mosquito MQTT
• Tailscale VPN
• ESPHome
• 3D print server (Repetier Pro) with webcam feeds
• Plex
• Blue Iris NVR
• Codeproject.ai (object detection)
• Transmission with PIA VPN
• Backblaze personal backup client for media

Hi there. My first post in this community.

I'm currently running:

• Pi-hole
• Plex Media Server
• Grafana
• Torrent server
• Monica
• Shaarli
• Matrix instance
• Arch package cache
• Several game servers such as Minecraft and Terraria
• VM running Volvo software to troubleshoot my cars.

My hardware: I used to run it all on a Supermicro x9drd-7ln4f-jbod with dual Xeon E5-2670 v2 with 16x16GB ECC ram and 6x 3TB disks in raidz2 for storage and 2x 60gb Intel SSDs for OS. I started with less and upgraded towards this configuration but it was consuming 300 watt idle which was just unacceptable.

So earlier this year I upgraded to an ASRock Rack x470D4U with Ryzen 7 5700x and 4x32GB ECC (non-registered) ram and 6x 2TB SSDs in raidz2. 1 ssd is in the nvme slot on the motherboard, 4 are in a 4x4 bifurcation card in the 16x slot and 1 more in a 4x riser. All PCIe lanes of the CPU are used. This setup is not possible with an AMD CPU with integrated GPU since it will take up 4 PCIe lanes (you can guess how I know). It uses about 20 watt idle without any containers and VMs running. I initially didn't want to move away from Supermicro but the ASRock Rack motherboard has IPMI so I'm not missing out on much.

Hardware and software suggestions are welcome :D

Lots of stuff! Currently running almost all of these in Docker on a Synology NAS:

• Code Server - access my notes files remotely
• Gitea - only used to store notes that are edited in Obsidian (or Code Server as mentioned above)
• Home Assistant - home automation
• Homebridge - used for one or two devices that have better integrations than natively in Home Assistant
• Jellyfin - video streaming platform (installed because it's FOSS and seems interesting, but I rarely use it)
• Overseerr - user-request app for video streaming platform (installed when I anticipated sharing my movies/shows before realizing that my ISP severely limits my upload speeds)
• Pi-Hole - block all ads network-wide
• Plex - primary video streaming platform
• Radarr - download movies
• Readarr - download books but have had better luck with Libgen on an ad-hoc basis
• Sonarr - download shows
• YTDL - download YT videos
• Wireguard - VPN into the home network

I live small in the cloud for now:

• dns
• email
• homeassistant

Used to selfhost a gitlab instance, nextcloud and some other things, but I'm between houses so it has to wait.

Lots of good inspiration here!

I'm just getting my server up and running! Previously it only ran Honeassistant.

Now it runs proxmox, which boots 2 vms, one for HAOS and another for Debian. On the Debian vm there is currently Plex, nextcloud, and some -arr apps.

8 also have a separate raspberry pi pihole. I've had that going for years now, I think I first made it 2019.

Jellyfin Nextcloud Homeassistant Mattermost Gitlab Visions of Chaos Oobabooga Automatic1111

I had a small X.25 network as combination coffee-table and space-heater at one point; this was before most homes had internet. It almost cost me a divorce.

Hardware:

• Two Dell r610s, each with 12 cores and 96 GB of RAM, running ESXi 6.7
• Lenovo M900, 4 core, 16 GB RAM
• Synology 1515 with 12 TB usable
• Synology 1517 with 32 TB usable
• Juniper SRX 220H (Firewall)
• Juniper EX 2200 48 port switch
• UnFi in-wall WiFi APs

Running a Kubernetes cluster on the Dell hardware, then another single node k8s cluster on the Lenovo, mostly to run Adguard home / DNS in case the big cluster goes down for whatever reason.

I run the following services, all in Kubernetes, with FluxCD doing GitOps from a repo in GitHub (for now, might move to Gitea later):

• Authentik
• Bookstack
• Calibre
• Flame (Homepage)
• Frigate NVR
• Home Assistant
• Memos
• Monica
• Plex
• Prowlarr
• Radarr
• Rocket Chat
• Sonarr
• Tandoor
• Tautulli
• Unifi
• UptimeKuma
• VS Code
• Zigbee2MQTT

Available from internet:

• jellyfin
• jellyseerr
• immich
• paperless-ngx
• owncloud ocis
• traefik
• homarr

Available only from local:

• the *arr stack
• qbittorrent
• jackett
• watchtower
• apprise
• netdata (kinda new, still have to fully understand how it works)
• portainer
• speedtest-tracker
• homepage

Security

All the services available from internet, just goes through traefik to terminate https, I rely on the build in authentication of each service. To add another layer of security, I have fail2ban active on all those services.

I have a public IP, and I have open on my router ports 80, 443, a random port for ssh and vpn.

Hardware:

Memory:
  System RAM: total: 8 GiB available: 7.73 GiB used: 4.46 GiB (57.7%)
  Report: arrays: 1 slots: 4 modules: 2 type: DDR3
CPU:
  Info: 6-core model: AMD Phenom II X6 1090T bits: 64 type: MCP cache: L2: 3 MiB
Graphics:
  Device-1: NVIDIA GP107 [GeForce GTX 1050 Ti] driver: nvidia v: 535.98

docker compose files

All the docker compose files + how I configured everything is available at: https://github.com/simone-viozzi/my-server

Bonus:

Since I like the ability of btrfs to do snapshots, I created all important docker volumes as btrfs subvolumes. Then I created a backup script that literally sends the subvolume (encrypted) to an external cloud. This does not allow incremental backups and most likely is not the best backup solution... but it works... the repo is: https://github.com/simone-viozzi/btrfs2cloud-backup

I welcome any advice / criticism!

Ceph (rbd,s3) on 4 poweredges.

Nomad, Consul servers running in a 3 node raft on some ARM SBCs.

Nomad clients on 2 poweredges and 3 arm SBCs running:

• s3 CSI (media and large file storage is all on s3)
• rbd CSI (all the stateful jobs have rbd block devices)
• NATS cluster with Jetstream to enable MQTT support
• mosquito mqtt (had to run mosquito for mqtt v5)
• mosquito<->nats bridge (via benthos)
• nodered (just for easy Google home integration)
• zwavejs2mqtt
• zigbee2mqtt
• frigate (can only talk mqtt v5 so had to run mosquito just for this)
• grafana
• gotify
• gitea
• drone CI
• postgresql
• BitTorrent client
• ceph rgw s3 gateways
• NATS based home automation lambdas - I wrote these in go
• Adguard home
• traefik as main ingress
• Prometheus
• prom node exporter
• jellyfin
• jackett
• a program I wrote that manages torznab->acquisiton->s3 lifecycle
• a website
• wireguard servers

And that is just in the server room - I also have more like the 3d printer and CNC machine controllers etc.

Everything except Node-exporter running in containers on a single Ubuntu machine. i5-6500T, 16gb RAM & 1TB.

Media Stack

• JellyFin
• Sonarr
• Radarr
• Calibre
• Calibre-Web

IT Stack

• FreshRSS
• IT-Tools
• Prometheus
• Grafanna
• Node-Exporter
• Watchtower

I host one of the worlds last gopher sites. And some Telegram bots, on Raspberry Pi's.

• Caddy (web server)
• Agate (gemini server)
• FreshRSS (rss reader)
• Yarr (rss reader)
• ergo (irc server)
• akkoma
• prosody (xmpp)
• conduit (matrix)
• nextcloud
• soju (irc bouncer)
• gamja (irc web interface)
• qbittorrent-nox
• unbound/dnsmasq
• isso (selfhosted comments server)
• smbd and nfs server
• pivpn wireguard
• minecraft stuff in seperate ubuntu vm:
• pterodactyl panel
• pterodactyl daemon
• probably something else I forget
• currently just running a monero miner as I have not been playing minecraft recently.

Hardware: Main server Ryzen 7 3900XT with 64GB of ram, two 240GB ssds running in raid1, two 4tb hard drives running in raid1, running proxmox with mostly alpine linux VMs

Secondary Server: Intel nuc running alpinelinux, only running secondary unbound/dnsmasq server so if my main server goes down, dns still works.

Late 2013 iMac: I was using it to run an iMessage to matrix bridge but I was not able to get it to work so now I just vnc into it to text. (suggestions welcome as vnc is annoying)

I also have another intel nuc that does not do anything.

All of these servers are connected to an APC back-ups UPS.

I host a bitcoin node, and some video

I host:

• docker-mailserver
• code-server
• Vaultwarden
• Flame Dashboard
• FreePad
• Gotify
• Nextcloud
• Baikal
• Mosquitto
• HomeAssistant
• Node-RED
• InfluxDB
• Grafana
• piHole, Cloudflare DNS over HTTPS client
• Uptime Kuma
• Nginx Proxy Manager
• wg-easy
• Shiori
• MeTube
• Sonarr, Radarr, Jackett, Unpackerr,...
• qBittorrent, Gluetun
• Jellyfin
• Watchtower
• Honeygain, Pawns App, Peer2Profit, Traffmonetizer
• 4 Websites via Nginx
• a few services that I wrote myself

I think that should be it. I left out some less important ones and probably forgot a few that I don't use that often. All these Services are spread across 2 servers at home and a small VPS mainly used for the mailserver and Uptime Kuma.

Right now, here’s what’s running on my Latitude 5580 with Debian 11 behind a Cloudflare Tunnel, all in containers:

• Cockpit
• Portainer
• Paperless-ngx
• Home Assistant
• InvenTree
• Monica (trying to move it to Notion, could also go into NocoDB but I like keeping lots of stuff on Notion nowadays, found no selfhosted alternative…)
• Twitch Channel Points Miner

Currently testing, mainly to replace InvenTree and follow the inventory and manufacturing of my custom ergonomic keyboards:

• Odoo
• ERPNext
• Dolibarr
• NocoDB

Still have to set up backups and I guess create scripts/notes to know how to update every one of these.

A Lack Rack with VMWare and TrueNAS servers, pfsense, Jellyfin, Zoneminder, web/email, Nextcloud, Minecraft, LineageOS build machine, .....other stuff

Hi everyone! I’m a big fan of self hosting :)

I have a dedicated server in Hetzner

• Intel Core i7-8700
• 2x SSD M.2 NVMe 1 TB
• 4x RAM 32768 MB DDR4

Been running it for almost a year without any issues. I host several things there. I’m using caprover.com for managing my deployments since I contributed on the project a few years ago and it’s so easy to get started.

Some of the things I host there:

• nextcloud
• MySQL
• Postgres
• privatebin
• some Hasura instances
• Kuma (for monitoring)
• Browserless Chrome (which I use for web scrapping)
• Plausible (analytics)
• A private Ragnarok Online Server

I have setup a cron job that dumps my all of my databases (Postgres and MySQL) to my Google drive every midnight.

Hope this can help as inspiration for anyone else. Cheers!

A cobbled together Ryzen 2400g with 16GB of ram. Open Media Vault/Docker: Plex Nextcloud stack with dns refresh/ssl/nginx Sonarr/transmission stack with VPN PiHole Octoprint

Occasionally I run a game server or two when the need comes up, mostly Valheim lately.

I have a meager ds418play with 2x4tb drives set up with RAID. I forget what it's called, but it is one drive redundancy, 1:1. I run Plex and an FTP server on it for file storage.

Virtualized with libvirt:

• Nomad (3 nodes)
• Consul (3 nodes)
• Vault (3 nodes)
• Gitlab + CI
• Nextcloud
• Sonarr, radarr, bazarr, jackett, deluge
• Prometheus
• opensearch
• puppet
• powerdns (international authoritive main + replica), unbound (internal recursor), ntp (2 nodes)
• powerdns (public authoritive replica)
• haproxy (2 nodes)
• nfs, samba
• Seaweedfs (S3) (3 nodes)
• rsnapshot
• package repositories (deb, rpm - plain dirs/files served by apache, with some scripts to manage repo metadata)
• postgresql + patroni (2 nodes)
• container registry (to investigate replacing with zot)
• openldap, keycloak (2 nodes)
• unifi controller

In nomad:

• Grafana
• Vaultwarden
• Tandoor
• Matrix
• Puppetboard
• Prometheus exporters for various things

Offsite rpi @ parents

• Rsnapshot, samba

Rpi doing router duties, to be replaced with rb3011 when I finalize it's config in terraform

VPS:

• Powerdns (public authoritive primary), haproxy, postfix (secondary MX)
• Postfix (primary MX), dovecot, spamassassin, opendmarc, opendkim

Old laptop: k8s playground for learning

Short-term todo:

• Homeassistant

Public dns names have A records pointing to haproxy vps, which proxies to home over tunnel, and AAAA records pointing straight to home (I have static ipv6 prefix, but no static ipv4 address)

Using LXD:

• ddclient
• Jellyfin (2)
• Minecraft (proxy + 4 servers)
• Satisfactory server
• V Rising
• Gitea vcs
• wordpress
• rtorrent
• other web servers

Using rootless Podman + Systemd service:

• Vaultwarden
• Linkding
• Traefik
• Immich photo backup
• Nextcloud (though I hate it, probably will stop)
• Grafana
• Prometheus
• Prowlarr/Radarr/Sonarr/Lidarr/Bazarr/Recyclarr
• Rtorrent + Flood
• Jellyseerr
• Navidrome (Subsonic server)
• Miniflux (RSS)
• Woodpecker (CI integration for Gitea)
• Tubearchivist (yt-dl)
• wg-easy (wireguard)
• searxng

All services are split across 2 DIY servers (in towers). 15TB of media stored on HDD with btrfs duplicated across both servers. One server host is Alpine Linux, the other is Opensuse MicroOS. LXD containers usually are Debian 12 or Alpine. I'm beginning to migrate some things to a cluster of (12) raspberry pi 3s. Unsure what to choose for rpi's, maybe, Fedora CoreOS (ublue), although Alpine does work extremely well on them (once you get them set up with it).

+ router running fresh tomato :)

Also mailcow for email, on a VPS, although I need to switch to a new provider, having difficulty with delivery using Linode and OVHCloud.

Can't ask too much off my little laptop, but here it is

• HomeAssistant
• Frigate NVR
• PiHole
• Wireguard VPN

I don't selfhost very much compared to other people and my hardware's pretty much either all literally found in the garbage or 2nd hand, but here it is

PiHole

WireGuard server that passes trough pihole adblocking

Homarr (lol)

Deluge

The system is mostly a NAS that I also run the occasinal general purpose VM off of, here are the specs for the 3 ppl that care:

CPU: AMD FX-8320E

RAM: 16GB

Storage: 5x2TB Seagate something something 7200RPM in RAIDz1, 128 GB random chinese SSD (mostly for VMs and apps) the, OS runs off of a flash drive

OS: TrueNAS scale

Just testing from selfhosted instance!

Navidrome

I have a few raspberry pis, running Home Assistant, Unifi controller, PiHole... Otherwise i have DigitalOcean droplets, one hosts my Lemmy instance, and another hosts a couple of side project websites (my wife's freelance business, and some other stuff)

Jellyfin and Nextcloud with UptimeKuma for monitoring. A pretty simple stack running on a mini tower, but it works great for my primary needs. Portainer for managing docker containers and stacks from a GUI.

VPS (Ubuntu on 4 virtual cores, 10GB ram, 100GB NVME)

• Mediawiki with semantic mediawiki and various plug-ins and 650 pages
• Orthantic and OHIF (radiology images)
• Moodle (docker)

Cloud container provider (different to above VPS provider)

• 3 x mediawiki sites

Homelab (Unraid on i7 4790, 16gb RAM, 3 x 10TB HDD, 4TB external disk, no cache disk yet, RTX 3070, fractal define 7 mid tower)

• Plex
• Komga (comics)
• Audiobookshelf
• Kavita and Calibre (books)
• Photoview (family photos)
• Filebrowser (work)
• Cloudflared (zero trust tunnels)
• Heimdall (dashboard)
• Krusader
• Plugins: docker compose manager, docker patch, unassigned devices

Have ordered an N100 mini PC from aliexpress with plans of installing OPNsense and running a couple VMs on it.

My gaming computer for interest, not currently hosting anything: 5800X3D, 7900XTX, 32GB ram, 2TB NVME, 2TB SSD, 4TB HDD, fractal meshify midbtower case.

I also have a Pi 4 and a Pi 3 that I don't have any use for currently. Open to ideas. I already run Adguard on phone and Ublock origin on desktop browser, and don't see any current use for Pihole.

Hi, I have a few bits and pieces.

Currently I have:

Pi Zero running pi-hole

A Mac mini running overseer on Linux

Another Mac mini that I use for dev work that’s also running sonarr, radarr, bazarr, plex and Hoobs under MacOS

A Dell R170 running a number of VMs (windows and Linux) that host a couple of websites , and a load balancer on proxmox.

Things are a bit spread out where I sometimes just had to use the hardware I had to hand but it all works together somehow.

Edit: I've also just spun up a MediaWiki for me and my colleagues to use to store useful snippets of code etc. in a central place. Although I know my colleagues, they'll use it once and then it'll be abandoned :D

Late to the party and after reading through some of these setups I may have to expand mine soon (it never ends does it?), here is what I have right now.

Unraid (Dell R720XD, dual Xeon E5-2670 v2, 64GB RAM, 12 x 6TB in 12 disk array with 2 parity disks, 800GB SSD cache pool)

-NextCloud

-Plex

-Emby

-Gitea

-Backrest

-MariaDB

-Netbootxyz

-Trillium

-Traccar

-Vaultwarden

-Adguard-Home

-Unifi

-Homebox

-Nessus

-Headscale

-Collabora

-*arrs

-Jupterlab

-Mealie

-SearXNG

-IT-Tools

-EmulatorJS

-Youtube-DL-Material

Proxmox (old Intel server S2600WT2, dual Xeon E5-2620 V2, 768GB RAM, 5 x 2TB disks):

-Zap2XML

-Immich

-Mumble

-NextPVR

-Stirling-PDF

-WebTop

-Frigate

-MCServer (gameserver)

-SDTDServer (gameserver)

-SFServer (gameserver)

There are some other things floating around in my homelab that aren't really 'selfhosted' things, just important to the home network:

3 HP Microserver Gen8's

-x1 with ESXi hosting pfSense

-x2 with TrueNas Scale for backups

R610 with ESXi for a few remote desktops and Home Assistant (which I'm sure I'll move to docker at some point).

Since I haven't seen it commented yet, I host a kiwix backup of stackoverflow and it has already saved me a couple times during outages.

Pi-hole, Wireguard + 'a CDN client' on raspberry pi 4 with SSD
Ditched my Synology NAS, running an unRaid machine now:
i5-10400, 32 GiB (to much) Memory, 15.7 TB used of 60 TB

• VMs: homeassistant , macOS, Windows 10
• SWAG, Cloudflare DDNS, Arrrrrr dockers, Plex, ArchiveTeamWarrior, gokapi, qBittorrent, Resilio Sync, wikijs, mariaDB + whatever I find interesting to try out

A Plex server, two DayZ servers and as of today a Lemmy instance. 😀

Turns out I have quite a lot of stuff, and yet I'm here thinking I barely have anything! Until now:

• Nextcloud
• Kitchenowl (grocery lists)
• Kavita (ebook manager)
• Grist (spreadsheets that are databases I guess?)
• Sharry (file sharing)
• Changedetection.io
• A ghost blog
• Bookstack (like a manual on managing the server)
• Portainer (manage containers from a webui)
• Diun (notifies when an update is released for a container. Doesn't have a webui)
• Homepage dashboard (basically a webpage that shows me my selfhosted services)

All these are running inside Docker containers, on an ancient laptop with a single cpu core and 3 gigs of RAM.

Excited to discover more things to host on that little pretty big guy (somehow its still running well)!

Feel free to take it as a chance to present yourself to the community!

Hello, my name is Zingo and I have a selfhosting addition going back to 2016 when I bought my first NAS with docker capabilities.

Community: Hi Zingo! Welcome!

Thank you.

Currently struggling more than even as it starts to take over my life. I have tried over hundreds of services.

I'll try to find strength to list some at a later stage in this healing process. Sorry no bonus points. Maybe in the next session.

Thank you all for this awesome support. I would be lost without you. 💓

I'm hosting Trillium Note for my personal note taking.

I selfhost on a 2011 Mac Mini running Ubuntu with 16 gb ram:

• Metabase (a data library of charts, dashboards)
• NocoDB (an Airtable replacement that makes it easy for my users to get data into Metabase)

I'm also setting these up on VPS

I used to host a ton of stuff, now I just host my WordPress site on Linode.

I have toyed with the idea of selfhosting a Lemmy server, but that's a project for another day.

I selfhost a lot of the normal stuff everyone else does. Plex, AdguardHome, etc...

I also have a 96+ port dial-up server system: https://2600.network

Currently I play around with a Raspi 4 8GB with docker-compose. Most services are accessible with VPN only:
Caddy (as easy reverse proxy)
Portainer (container dashboard)
Linkding (bookmarks)
Baikal (calendar, todo list to sync with Android by caldav)
Agendav (web calendar frontend)
Dillinger (browser markdown editor with PDF export)
Trilium (note app)
Syncthing (google drive/onedrive alternative)
Seafile (file sharing)
Jellyfin (media server)

Hello

Let's have a look at the inventory

• RPI 4B

  • OpenHab (Openhabian actually, so some additional services like Zigbee2MQTT or Grafana)

• HP EliteDesk 800 G2 i5-6500T, 8GiB RAM - this one is currently the mainstay of my lab, running containers with docker-compose

  • Nginx as reverse proxy (+ fail2ban)
  • Paperless-ngx (+ Redis, Tika, Gotenberg)
  • Jellyfin
  • Minecraft server (+ Mapcrafter)
  • ddclient
  • Heimdall

• Dell OptiPlex 7060 Micro i7-8700T 32GiB RAM

  • I've gotten this one fairly recently. A real bargain - costed as much as the CPU alone and was in pristine condition. I will be migrating the workload from EliteDesk to this one. I decided to try ProxMox this time though, so I need to learn a bit first. Also perhaps add a second SSD

I use proxmox on my server. I virtualize opnsense (with adguard and wireguard), jellyfin, unifi, home assistant, and syncthing.

I have a synology ds220j w/ 2x10tb

Hardware: Intel 12100, 32gb ram, i350-t4 network card TP link TL-SG108E switch

I'm going to move opnsense to a dedicated box eventually

• Mail server
• Bitwarden (vaultwarden)
• Git server (apache + basic git server. no git frontend)

All on dedicated cloud servers for simplicity and security.

Im looking at selfhostihng on my own hardware again. Im considering the following

• lemmy instance
• proxmox with gpu
• Some sort of production database

Nothing too grand - a couple Discord bots and a few retro shooter servers in the cloud, and also a Raspberry Pi 4 in the living room which serves nicely as a media center and seed box.

Main Server - 37 Containers, 4 VMs

• Media: Plex, Audiobookshelf, along with everything for a complete *arr stack
• Network: Cloudflared, NginxProxyManager, Tailscale, Gluetun (for *arrs)
• Other: Authelia, OpenVSCode, Filebrowser, SFTPGo, Bitcoin Node to support the network
• VMs: Parrot, Windows 11 for local and remote gaming, Windows 3.11 (because why not), currently spun up myNode to see if I want to explore hosting a Bitcoin Ligtning Node

Smarthome Server - OptiPlex 3050

• Containers: mqtt, NodeRed, zigbee2mqtt, homebridge, tailscale, pihole (paired with my phone usually)
• VM: HomeAssistant

Testing Server - OptiPlex 7060
Lately been testing and making stuff using linuxserver/docker-baseimage-kasmvnc.

• Arduino-IDE running in a container - with USB hotswap.
• Featherwallet and Electrumwallet (I use a HW-Wallet for HODL).
• Lutris, got it working with Hearthstone, but didn't really have a use for it.
• Nomachine in kasmvnc, to (somewhat) smoothly access my VMs through the webbrowser when I just need something fast.
  Linuxserver Firefox.

XMR Mining Server - Old tired HP SFF
Basicly everything from this guide by seth for privacy; monerod, p2pool, tor, watchtower, and a python-webserver to expose metrics/api.

Hardware:

• CPU: 2x Intel Xeon E5-2695v4
• RAM: 256GB ECC
• Storage: 4x256GB Enterprise SSD, 4x2TB SSD (ZFS Striped Mirror)

Software:

• pfSense
• Proxmox
• k3s with Flux and Longhorn
• Gitea
• Woodpecker
• UniFi
• FreshRSS
• Grafana / Loki
• Ntfy
• Paperless-ngx
• Vaultwarden
• Minio
• Syncthing

I purchased the server used. The services are mostly running in a virtualized cluster, which is absolutely oversized for the current tasks. However, it has motivated me to learn Kubernetes and the power consumption is within my limits.

I have a (beefy specd) Intel NUC that's running Proxmox. A few of the VMs mount to my RS1221+ for things like media (Jellyfin), etc.

On Proxmox I run

• Jellyfin (media server)
• Home Assistant (home automation)
• PiHole (DNS)
• Ansible (For keeping everything up to date and applying bulk actions)
• NGINX Proxy Manager (so I can access things locally with a nice URL)
• VM to host my Discord bots
• Whoogle (Search engine)
• AMP game server

Probably missing a few, but that's the jist

First post in the world of Lemmy! Woot! Another Reddit escapee. I can't for the life of me understand the management team at Reddit. I get that they need to make money and that they're pissed off at the AI guys for pilfering their data but the people who contribute to the subreddits and moderate them for free are why Reddit is such a success. Why would you screw them over? It's so short sited. If you're pissed at OpenAI then talk to them and figure out how they can pay for your API access but don't screw the people that made you a success. They can afford to spend a little of the VC/Microsoft money. Okay...off the soap box now.....

Up until very recently I was running all my services on a HP DL380 Gen9 server. Beautiful server but sucks back electricity like a drunk on New Years Eve and is way too noisy for my office. Purchased 4 different Tiny PCs (3 Lenovos and 1 Dell).

One Lenovo (AMD Ryzen 3 PRO 2200GE with 32GB RAM) is running RockyLinux with Docker with 20+ containers currently running.

• "Sweden Services" - SABnzbd, Sonarr, Radarr and Lidarr
• Tools - IT-Tools, Pairdrop, CyberChef and Paperless NGX
• Homelab services - Portainer, Dozzle and Nginx Proxy Manager
• Info - FreshRSS
• Media - Plex, Audiobookshelf and Navidrome

I'm constantly playing with different containers - adding, removing, etc. I did try making the switch to Podman as I like the idea of rootless containers but could not for the life of me get things like NFS shares and Portainer integration working and was spending way too much time fighting with it. Will probably try again in the near future.

Then the other 3 Tiny PCs are running XCP-NG with various VMs including my Xen Orchestra, Kali, a couple Windows machines (usually off), Tailscale gateway box and a few others. Again, mostly for testing things out.

Using OpnSense as my firewall. Have a TrueNAS system sharing files and another small Rockstor NAS also.

Looking forward to the community here. Thanks.

Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I've seen in this thread:

Fewer Letters	More Letters
DNS	Domain Name Service/System
ESXi	VMWare virtual machine hypervisor
IP	Internet Protocol
LXC	Linux Containers
NAS	Network-Attached Storage
NVR	Network Video Recorder (generally for CCTV)
PiHole	Network-wide ad-blocker (DNS sinkhole)
Plex	Brand of media server package
SSD	Solid State Drive mass storage
Unifi	Ubiquiti WiFi hardware brand
VPN	Virtual Private Network
VPS	Virtual Private Server (opposed to shared hosting)

---

[Thread #292 for this sub, first seen 21st Nov 2023, 13:45] [FAQ] [Full list] [Contact] [Source code]

Minecraft server, a pingvin share site for myself, tubearchivist, pihole, pivpn, 25mb video compressor with a script and incrontab along with the same thing but for GIFs. I think that's most of the list

In addition to the standard complement of jellyfin etc. I run a Docker OS on Google's free tier with Gotify along with Uptime Kuma running on a tiny x86 computer accessed via a Cloudflare tunnel. Discord watches the watcher and notifies me if Gotify goes down!

It's a great combo. All reverse proxying is handled by HAProxy on my pfsense router.

In addition to the standard complement of jellyfin etc. I run a Docker OS on Google's free tier with Gotify along with Uptime Kuma running on a tiny x86 computer accessed via a Cloudflare tunnel. Discord watches the watcher and notifies me if Gotify goes down!

It's a great combo. All reverse proxying is handled by HAProxy on my pfsense router.

Have a PC in the basement acting as a server.

• Microk8s on Ubuntu Server
• Custom-written experimental NodeJS app to help when playing D&D
• Keycloak to act as an IDP
• Cloudflare tunnel to receive traffic
• Valheim server (temporarily -- I moved this back to local)
• Wiki.js

Two "servers"

Pi4-8gb; 1TB SSD:

External-facing

• Pi-hole
• home assistant
• web server
• Calibre
• Simple games like Minecraft

Dual Xeon; 96Gb Ram; 50TB; bound NICs:

Internal, mostly

• media: Jellyfin, -arrs
• Sabnzbd
• Steam games server (these are external containers)
• Looking to add cloud files access; just haven't decided what and how, yet

Currently self-hosting a pi-hole instance, an nfs/smb server & a LAN-only webserver, as well as 24/7 syncthing (to which I automatically send my phone's photos to)

My specs are:

Intel Atom N270 (1 core, 2 threads) 1Gb DDR2 Ram (God knows the frequency but it's slow.) And a 500gb HDD

You really don't need a lot of oomph to self host! I'm planning on running a qBitTorrent webui next.

I have Vaultwarden running on an old laptop, so I definitely don't have much going on. Reading through these comments gives me plenty of ideas on what else to run though!

Eh... just your typical docker pihole + 2x unbound setup.

Currently self-hosting on an old HP Z600 I bought second hand with the following specs:

CPU — 2x Intel(R) Xeon(R) CPU X5660 @ 2.80GHz RAM — 96GB ECC DDR3 (6*16GB) Disks — 4TB HDD for Ubuntu, 10TB HDD for NextCloud and 2TB Sata SSD for Docker

For services, I'm currently running the following:

Docker

Portainer — CF Tunnel

FreshRSS — CF Tunnel

ArchiveBox — CF Tunnel

Adguard Home — Local

2x Uptime Kuma — CF Tunnel

LinkAce — CF Tunnel

TheLounge — CF Tunnel

Watchtower — Local

#For public access dockers

Feedropolis

Mirotalk SFU

FiveFilters RSS

Taiga

2x Mattermost Servers

8x Wordpress Staging Sites

1x Wordpress Dev Sites

For ubuntu, I'm running a few services and apps like:

ScreamingFrog

9 sites using LAMP stack

Aria2c with AriaNG

NextCloud

Plex

4x WebHooks server for communities

Couple of API end points using Apache reverse proxy

OpenVPN

CrowdSec

Ohh, I'd love to share.

Running most services as docker/ kubernetes containers.

Currently running Plex (previously Jellyfin, maybe will switch back) for media streaming.

Grocy for food/task/family organisation (grocery list and so forth)

Piehole for home ad-blocker and proxy 🙌🏻🙌🏻🙌🏻

currently, I selfhost https://beyondcombustion.net and now https://lemmy.beyondcombustion.net for /r/vaporents and hopefully others. There's other stuff I self host too, this is the fun new stuff though.

Currently self-hosting on an old HP Z600 I bought second hand with the following specs:

CPU — 2x Intel(R) Xeon(R) CPU X5660 @ 2.80GHz RAM — 96GB ECC DDR3 (6*16GB) Disks — 4TB HDD for Ubuntu, 10TB HDD for NextCloud and 2TB Sata SSD for Docker

For services, I'm currently running the following:

Docker

Portainer — CF Tunnel

FreshRSS — CF Tunnel

ArchiveBox — CF Tunnel

Adguard Home — Local

2x Uptime Kuma — CF Tunnel

LinkAce — CF Tunnel

TheLounge — CF Tunnel

Watchtower — Local

#For public access dockers

Feedropolis

Mirotalk SFU

FiveFilters RSS

Taiga

2x Mattermost Servers

8x Wordpress Staging Sites

1x Wordpress Dev Sites

For ubuntu, I'm running a few services and apps like:

ScreamingFrog

9 sites using LAMP stack

Aria2c with AriaNG

NextCloud

Plex

4x WebHooks server for communities

Couple of API end points using Apache reverse proxy

OpenVPN

CrowdSec

Currently self-hosting on an old HP Z600 I bought second hand with the following specs:

CPU — 2x Intel(R) Xeon(R) CPU X5660 @ 2.80GHz RAM — 96GB ECC DDR3 (6*16GB) Disks — 4TB HDD for Ubuntu, 10TB HDD for NextCloud and 2TB Sata SSD for Docker

For services, I'm currently running the following:

##Docker Portainer — CF Tunnel FreshRSS — CF Tunnel ArchiveBox — CF Tunnel Adguard Home — Local 2x Uptime Kuma — CF Tunnel LinkAce — CF Tunnel TheLounge — CF Tunnel Watchtower — Local

###For public access dockers Feedropolis Mirotalk SFU FiveFilters RSS Taiga 2x Mattermost Servers 8x Wordpress Staging Sites 1x Wordpress Dev Sites

##For ubuntu, I'm running a few services and apps like: ScreamingFrog 9 sites using LAMP stack Aria2c with AriaNG NextCloud Plex 4x WebHooks server for communities Couple of API end points using Apache reverse proxy OpenVPN CrowdSec

I've been working on expanding my homelab recently. I have a physical box at home serving as an LXC host along with a few VPSes. I'm now up to:

• Some static web sites
• Nextcloud
• Jellyfin
• Forgejo
• NTFY
• A reverse proxy
• An IRC server
• A Gemini server
• A VPN
• DNS servers

I think I read an old blog post once that said "Servers tend to multiply like rabbits" and it's 100% true.

I use a combination of a MacMini Oracle cloud, probably not best long term solution but it's free (while it lasts).

Stuff that runs on Oracle:

• caddy proxy (mostly used for Mac reverse proxy)
• couch db (obsidian live sync plugin)

Stuff on Mac:

• blue bubbles (iMessage relay for Android)
• Plex (for photo backup)

Aside from that not much else 😊

Do you have some massive server home or using VPS/VDS?

Hi, I have an Unraid server (currently offline due to moving :'-/ ) running

VMs:

• 2 full flat Windows and Pop_OS! VMs with GPU passed through
• 2 low resource Windows and Pop_OS! VMs accessible by VNC
• Home assistant OS

Docker containers:

• Calibre + Calibre-web: apart from managing my ebook library, calibre goes through my RSS feed and generates daily epub newspaper/magazines that are send by Syncthing to my eink tablet
• Syncthing: apart from that it also synchronizes my handwritten notes from my eink tablet between my devices
• Nextcloud: intended to replace Google/Microsoft cloud, but, due to previous apartment's internet connection with PIA triple-ish NAT situation, is only used to backup photo/video from my phone (might change later)
• EMBY: media streaming
• Gitea: WIP, not currently used
• dokuwiki: WIP, intended to acumulate manuals to home appliances and stramlined directions on how to use and maintain them
• influxDB and Grafana: values and graphs from Home Assistant

The server was born when I merged my desktop PC, that was off and not utilized most of the time anyway, and my off the shelf NAS with 4 drives in raid5, that was slow, loud and could only run built-in garbage services. I ran Emby on Windows on my desktop, meaning I would have to manully turn it on every time I wanted to watch something.

Now my server runs on Ryzen 5 1600 with 48GB of RAM, GTX 1060 salvaged from a minig rig and total of 7 drives - 4 HDDs, 2 Sata SSD mirrored for cache and containers and 1 NVME SSD for VMs.

3 Proxmox nodes 2 SFF Dell Optiplex (i5 with 32gb RAM) 1 Nuc (i7 with 64gb RAM)

1 Truenas host (old gaming PC i5 with 64gb RAM and 8TB ZFS pool

pfSense appliance for firewall

• Pi-Hole
• Vaultwarden
• Immich
• Paperless-ngx
• InfluxDB + Grafana
• Ansible
• Nextcloud
• Wireguard
• UptimeKuma
• Homeassiatant
• Homepage
• Octoprint

I see people listing things I've never heard about...I thought I had spent a considerable amount of time on the old sub and knew stuff. Guess I gotta hit the books.

Right now though I'm hosting everything on a 2012 Mac Mini that's running Proxmox.

Been using these programs for awhile now:

• Photoprism
• wireguard
• web blog testing instance while the live one lives on linode
• plex
• filebrowser
• pi-hole
• homepage

Nothing crazy but cool stuff to learn in my day to day. I want more hardware but I'm about to buy a house. It's crazy how much I'm throwing at an 11 year old computer and it's handling it all quite well.

Original comment overwritten

On a VPS:

• mailcow for email for a personal domain

On home network:

• unraid server as a local fileserver for backups and media (repurposed from an i5 2500k with a bunch of drives added)
• unraid server hosts a bunch of containers -- plex -- jellyfin -- *arr apps

Edit: and hoping to play around with hosting a lemmy server in the next few days