Parametric Eq and Bass, which frequency bands?
Parametric Eq and Bass, which frequency bands?
Bass guitar EQ will make or break the low-end of a song. This powerful frequency range contains the energy, the punch, and the groove that supports...
![How to EQ Bass Guitar for Energy, Punch, & Clarity | LedgerNote](https://lemmy.world/pictrs/image/2937b03b-a8d6-4ca0-bb3c-75ec59e064c1.jpeg?format=webp&thumbnail=256)
Hi, I recently bought an Eq2 pedal from Source Audio.
By looking around I found this:
- 80 Hz - 200 Hz: Energy & Fullness
- 200 Hz - 500 Hz: Muddiness & Boxiness
- 500 Hz - 1 kHz: Punch & Intelligibility
- 1kHz to 5 kHz: Attack, Harmonics, Clarity
Knowing this, I'm wondering how to configure my frequency bands. First, I'm looking for something simple to get to grips with the pedal, and I was wondering if there were any best practices for setting the frequency bands. For example, for the lowest part, is it better to set 2 bands, one at 80, the other at 200? Put a band in the middle? (80 + (200-80)/2 = 140)?
Another idea I had was to use the bands defined on a graphic Eq like MXR 10 Bands (31.25, 62.5, 125, 250, 500, 1K, 2K, 4K, 8K, 16K)
Thanks!!