Actually, they do exist; that's kind of the problem.
Y'see, what ya do is take yer two cords and cut the ends off. Strip the wire and tie 'em together. Then ya wrap em in electrical tape so they're water tight! Bam! Problem solved!
You mean these?
I posted these ones I found at the ski area I worked at 8 years ago. I wish they were a joke but some fucking moron had made these and used them on the trees in front of the lodge. In piles of snow too.
Me and my dad actually had to do this with a high voltage plug for an air compressor.
We had a welder that had the same plug as our air compressor but we needed it to be longer. So we spliced two male ends together to make an extension.
It was only extremely dangerous for about 5 minutes but that was some of the sweatiest 5 minutes of my life.
Here's a short extension cord version of one
The explanation of why they're a bad idea is valid though. Usually the kinds of people who know just enough to want this type of plug are also the type of people I wouldn't trust with one.
Edit: I'll go ahead and explain why people want plugs like this. These can be used to backfeed power from a generator into a house, letting you used different outlets/lights in the house. A knowledgeable person can actually use something like this safely, but most people who would use something like this don't know enough to do it correctly. The dangers about doing this are:
- You can easily shock yourself off of the exposed pins of the cord. You can avoid getting shocked by waiting to plug into the generator until the other end is connected first.
- You can backfeed power onto the electrical grid. The power going backwards through the transformers will step up the voltage to thousands of volts, and could seriously injure or kill the linemen who are trying to fix the outage. This is avoided by making sure you've opened either the house's main disconnect breaker or the breaker for the individual circuit you're plugging into.
There are some safer ways to setup this type of generator use, there are special generator power cords/outlets that won't have exposed energized prongs if plugged into a generator. There are also transfer switches or breaker interlock kits designed to prevent someone from being able to backfeed power by requiring them to disconnect commercial power before the generator can be fed into the house's distribution panel.
It’s pretty telling that the product page has zero reviews. I don’t think this product has any surviving users.
"Is this UL certified?
I trust NANCHANGZHENGFUYUANGUOJIMAOYIYOUXIANGONGSI for all my dangerously illegal electrical needs!
The car community has a saying "Only when you know all the rules are you allowed to break some of them"
Also in TTRPG community, but they break it all the time.
I'm not well informed, but I wouldn't be surprised if in some places it wouldn't be legal to sell that kind of cords (because of being a safety hazard and such).
For a generator you ideally want a 220v version so that you can power all the circuits in your house. Which makes the suicide cord all the scarier.
Omg please everyone report that listing z
It cracks me up that they'll sell chainsaws to anyone.
I used to know a hardware store that sold guns in the 80s. Guy bought one, walked down the block, robbed a bank with it, and died in ensuing police shootout. Store stopped selling guns after that.
Aha! I knew there was a string adapter for my tin can so I can plug it to my audio jack!
But... They do exist. They're just incredibly stupid and dangerous.
Illegal too, according to the sign.
It’s also a good thing dildos aren’t made of
metal and connected to voltage.Some are and some pay extra for that...
Like, a motor.... The State of Arkansas would pay you for a novel execution device though.
Who is your dildo guy? Their selection is too limited.
You don't sound fun
Not with that attitude
I hate that we live in a world where this is a popular enough question that a sign had to be made about it.
The fuck is wrong with people? Just rehang the lights! It takes less time and effort than getting in the car and going to Ace to ask for a deathdapter!
YOU CANT HIDE THE TRUTH
The electrical ones don't exist because it would mean you have exposed metal that is carrying current when a human touches it. However, for some odd reason you can buy it for control panels.
americans....
What even is this? I never saw one in my life, so the sign must be telling the truth.
People hanging Christmas lights do the whole house and when they go to plug it in, they realize they have the female end by the outlet, not the male end. "Fuck, I'm not gonna redo the entire process" the idiot thinks to himself, I'll just get a male/male adapter.
It's not sold because as soon as you plug in the side to the house, the other ends become live, and touching them means "big ouch".
"That's okay, I'll just plug the end into the lights, and then into the house, problem solved" the idiot thinks.
Except the far end of the lights has a male adapter and that end is still live. Plus, anyone who doesn't know about your deadly modification is in danger of hurting themselves because they don't realize the hazard.
There are exceedingly niche applications where these cords are used, but those applications only come up for trained electricians who know how to make one of these cords, and use them responsibly. If you're asking the minimum wage guy in the blue vest, this sign is for you.
Ace Hardware has Dremels, solder, epoxy, and 600 grit sandpaper, and if you stare at this sign for no less than 40 seconds an employee will saunter up and you can ask them where to find all that stuff.
I think thou dost protest too much. Perhaps not so much ace as you claim.
Right below the sign they probably have the bits you need to craft one (two repair plugs and a bit of wire).
I'm sure you can find one on AliExpress.
I think i have we might have one of these but in eu type somewhere in the shed. Does have about 15cm of cable between the 2 plugs tho.
We had one of these bad boys powering my Dad's shop when I was younger. The look on my Dad's face when I was troubleshooting why the power to the shop went out was priceless. Communication saves lives, kids. It certainly did mine. Reasonable electrical wiring will do that in place of communication.
Anything exists if you're skilled enough with flatware and snips
You have conjured an image that is both more effort and more dangerous than OP.
