Any worthwhile Cyber Monday Deals?
Any worthwhile Cyber Monday Deals?
Entry level or mid range, I don't want to break the bank as it probably won't get used much but I don't want to get straight trash either. Any suggestions would be appreciated.
Not discounted currently (I'm not convinced BF/CM aren't all fake), but I recently got a Sovol SV06 for ~$209 from Amazon and had seen it at that price for several months, so it'll probably come back down again.
I had one minor issue but the troubleshooting video on the Amazon page showed me how to fix it, and it's been printing like a champ with no issues so far. FDM printer (i.e., not resin) with an all metal hotend so it can handle more exotic/stronger filament types. The auto bed leveling is also super great, most Enders don't come with that and from what I've heard bed leveling is a bitch.
Also it's been my only 3D printer ever so I don't have much of a reference point except the ones we had in university that were almost always broken. (Or at the least unlevel)
Thanks, that's about what price I had in mind. It's been awhile since I've priced them so I'm happy to see decent ones under $200.
Cheapest reasonable quality sla printer I've seen so far: https://a.co/d/hyT4uV5 I bought one to replace my old epac x1
Colorfabb.com has a 25% sale. For everyone looking for quality filament in Europe.
Not a printer, but Playmaker ASA is on a decent sale currently: https://www.amazon.com/gp/aw/d/B0B45QLHFQ their 3 kg blue spool is $50
If you're asking about a printer, are you looking to go FDM or SLA/resin?
@IMALlama I think my account is borked. I can see the comments in my inbox but on my post I can only see my comment. It says (6) comments but I only see mine. A number of communities don't seem to show up properly, I thought it was just a Lemmy issue but maybe it's a me issue. I also didn't think this community was even active because the newest posts are a couple months old for me but I've gotten good feedback so thanks for all of the advice and the crash course.
It may be the instanced you signed up with. I think lemmy.world has defederated from a bunch of other instances plus has a lot of users and a lot of stability issues because of that.
I only had 'undetermined' selected for a language option, I added English and all is good. Thank you though.
I'm not sure. I'm starting from zero so either? I'm pretty technically inclined but I'm hoping it's easy enough to keep my teenaged daughter interested, if that makes a difference.
SLA is nice and you can make intricate figurines but it's usefulness is limited. resin is also expensive, and a pain to manage and clean up.
if it's your first foray into printing definitely stick with a "normal" filament plastic machine (FDM). you can do a lot more large-form stuff and also make significant inroads into making mechanical/functional parts that could solve problems around your house even. SLA can't do that. Plus when FDM fucks up bigly it can usually be fix with a screwdriver and 2 sizes of allen key...
It looks like you're replying to the thread vs individual comments. I would have seen your reply faster the other way around :(
FDM prints will be stronger and don’t require any chemical post-processing. They will require mechanical post processing (filling, sanding) if you want smooth features, but depending on what you intend to use the part for this might not be necessary. Some filaments, like ABS and ASA require some caution while printing (they release VOCs) and some filaments can absorb water while they’re out in the open, causing a decrease in print quality. If you stick to PLA and/or go through spools reasonably quickly it won’t be an issue. I print mainly PETG and while I don’t dry my spools and store them out in the open I don’t really have any issues with older spools.
SLA prints can have much smaller features, but require post processing (rinse and cure). SLA printers also tend to have smaller build volumes. There’s also the whole having to deal with unused resin thing and the fact that you probably should collect waste products and dispose of them properly. But if you’re making minis or something like that you’re much better off with a SLA printer.
On the FDM printer, a cheap stocker printer with a big following (eg Ender) is usually a fine option. There will be a lot of support in terms of community and parts. I’ve been running a rebranded Wanhao I3 clone, which is essentially an earlier ender, for 5+ years without much modifications. Most cheap FDM printers are going to require some amount of fiddling to keep them going. You're also likely to eventually modify them to alleviate some of the design decisions that enabled their lower price points in the first place. That doesn't mean you shouldn't buy a cheap FDM printer if you're on a tight budget, just know what you're getting into.