I use Goo Gone for sticker adhesive removal. Works fine on various surfaces in my experience.
I've never used it myself, but i can say I've heard it praised many times.
The only time it's disappointed me was when I was trying to use it -- among a variety of other substances -- to deal with something other than sticker goo.
A few years back, a bunch of electronic devices were sold in the US that used some sort of rubberized coating that gave them a nice grippy feeling. Unfortunately, it turns out that after a couple of years, the coating degraded and turned into an incredibly sticky mess. I had a Grundig G6 Aviator shortwave radio that was affected, as well as a few other devices. It felt a bit like sticker adhesive, but trying to clean the stuff off with Goo Gone didn't work well (ultimately, isopropyl alcohol and a lot of elbow grease wound up being my most-successful combination).
But for what it is actually billed for, adhesive residue, I've had good experiences.
Note that Goo Gone, or at least the variant I have, has a quite-strong citrus smell, which I assume is there to mask some less-pleasant smell that the active ingredients have. So when I use the stuff, everything nearby smells like oranges for a while. Haven't had a situation where that's a problem yet, but thought I'd mention it in case it would be an issue for anyone else using it.
Just use alcohol or white spirit. That stuff is an expensive gimmick.
Olive oil does the trick.
Or any kind of oil. Even WD-40, if you have it. Put oil on the adhesive residue, then scrub it off with a cloth. You can then remove the oily residue with soap.
This is the way. Olive oil or any oil will prevent the glue from re-adhering to the bottle after you've scraped it off.
Depending on the adhesive, rubbing alcohol or a vegetable oil.
Lots of good suggestions in this thread already, but long ago I used to work at a company that sold second-hand stuff where we often had to deal with stubborn labels and I haven't seen our "nuclear option" mentioned yet. Brake cleaner, which is basically an organic solvent in a spray can, should be great on glass. Be careful with it, though, it melts some kinds of plastics. And ensure it's used in a well-ventilated area.
Try that if the usual GooGone type stuff doesn't work.
We also used WD40, it tended to be gentler on plastics. Though it left a greasy residue that we'd need to clean off afterward and it was pretty slow.
Brake cleaner will not only take the paint off your wall, it will start to eat it.
I have had great luck removing labels by filling bottles / jars with boiling water and letting them sit a few minutes. I mostly do this to save wine labels I like or want to remember. When doing this it is also very easy to wipe off any residue.
Isopropyl alcohol works. I used IPA for cleaning car windows from sticker residue.
I suggest, if it's not too gooey, grab some packing tape, and press it on the adhesive. Then, pull it off quickly. You might have to do this a few times, but it's the best method I've found that doesn't leave residue, and also works with most sticky adhesives.
Heat and peel (slowly). You can pop some hot water in it or use a hairdryer.
Strong alchol on a cloth or papertowel to remove what remains.
If all else fails WD40 also works.
This is from removing labels from cars, where you have to be careful to prevent damage to the paint/clear coat.
With glass you can use a razor to scrape off whatever remains, but mostly it's not necessary.
There's a citrus based cleaning spray that usually does the trick for me, or isopropyl alcohol could work as well
razor blade or other sharp scraping tool works great. Alternatively, you can try something like GooGone, but I have had mixed results there.
Years ago at one job we used to use a combination of a razor scraper and Goof Off and it worked well. It was on pricing stickers on metal painted with enamel, and as long as you didn't dig into it and just worked it loose it would come clean. Goof Off is a harsher chemical than Goo Gone (I think toluene or some mixture) so not the best for long term exposure, but that was then and we had some ventilation. I also think the product sold now like so many might be more diluted and not the original.
Olive oil on the other hand works surprisingly well if it can get to the adhesive.
I normally just put it in the dishwasher alongside everything else and the heat and the steam do the job.
Depending on the dishwasher, that may not be a good idea as the label can clog the dishwasher filter though.
Nobody's mentioned lighter fluid so far, but that stuff works well. Dad always used Ronsonol and it's quite cheap. It's also highly flammable, so mind that.
A couple points:
The lighter fluid that the parent poster is talking about, Ronsonol, is not the stuff that goes in butane lighters, nor is it the "lighter fluid" used to start charcoal barbecues. He's talking about the stuff that goes into Zippo and similar refillable lighters, stuff that's also called "naphtha".
If you want to use it as a solvent with much frequency, you can get the stuff at dramatically-lower unit prices in much larger containers than what Ronsonol is sold at.
https://www.amazon.com/2-Pack-VM-NAPTHA-QT-KLEAN-STRIP/dp/B01LWRQPWK/
Keep in mind that this is potent stuff and can damage some surfaces. For example, another user is talking about using Goo Gone above to remove adhesive from paint on a wall. Naphtha is more-or-less paint thinner -- your wall's paint will dissolve in it. It'd be fine on glass, what OP is intending it for, but if you use it elsewhere, be careful with it, try it on a small amount of the surface somewhere first to see if it damages it.
It can also cause skin irritation. Probably not a big deal unless you're regularly using it, but worth keeping in mind.
I also have a container of white spirits, which are similar but less volatile.
Goo-B-Gone or Goo-Gone, plus steel wool like SOS pads or Scotch-Guard. Razors would work if it was a flat surface, but on a curved one like a bottle or glass, you want the flexibility of the steel wool.
+1 for steel wool
I like to use WD-40, I just lube it up and massage the adhesive until it dissolves into a goo that can be removed with dish soap. I find the goo-gone that I tried evaporates too quickly to soak into stiffer jar label adhesives.
orange oil is one i haven’t seen mentioned yet!
i haven’t tried olive oil and other similar oils like others have suggested, but there’s a product in my country that’s specifically sticky stuff remover (like label residue) and it’s made of orange oil
Wait... oranges have oil?! O.o
It's in the peels and has lots of the fruits flavour. All citrus have it, that's why you grind a bit of lemon peel into your food: It tastes way more lemony than the juice.
When I need to do something like this I run the glass under hot water to soften the adhesive the use 91% rubbing alcohol.
90%+ rubbing alcohol makes a very good solvent for removing things like this. And it's probably cheaper than goo-gone.
Alcohol solvent can make this worse depending on the adhesive. It can just spread the stuff and thin it out. Someone else suggested oil, that's the ticket. Bit of olive oil on a rough cloth brings it right up. Wd40 was also suggested, same idea. You want it to move easily, not dissolve.
I use rubbing alcohol for everything. Works really well to get tree sap and tar off of your car too.
An Oxyclean soak is the most common way I see homebrewers recommend for removing labels from bottles. Definitely a good choice if being food safe matters.
