The maker of Onewheel resisted recalls for almost a year.
Future Motion, the maker of the Onewheel electric skateboard, is recalling every one of them, including 300,000 Onewheel self-balancing vehicles in the US. Alongside the US Consumer Product Safety Commission (CPSC), the company now seeks to remedy the products after four known death cases — three without a helmet — between 2019 and 2021.
The recall comes a year after Future Motion took issue with the CPSC’s calls for recall and claimed that it tested and found nothing wrong with the Onewheels. At the time, the company issued a press release in objection to the CPSC and called the agency’s statements “unjustified and alarmist.”
Now Future Motion is moving forward with a voluntary recall it chose not to do almost a year earlier. The company is asking owners to stop using their Onewheels until they take appropriate action. For the newer Onewheel GT, Onewheel Pint X, Onewheel Pint, and Onewheel Plus XR, a software update with a new warning system is the remedy.
For early adopters, however, the CPSC and Future Motion are telling owners to stop using and discard the original Onewheel and Onewheel Plus. We asked Onewheel chief evangelist Jack Mudd in an email how many of the original units are affected, but Mudd refused to answer. Mudd also wouldn’t tell us why the company claimed there were no issues and publicly resisted issuing a recall back in 2022.
Mudd did say that the software update for the other models is rolling out worldwide, not just in the US.
Some crashes occurred due to Onewheel skateboards malfunctioning after being pushed to certain limits. The Onewheel GT, Onewheel Pint X, Onewheel Pint, and Onewheel Plus XR will receive a firmware update that will add a new warning “Haptic Buzz” feedback that riders can feel and hear when the vehicle enters an error state, is low on battery, or is nearing its limits and needs to slow down.
“This update is the culmination of months of work with the CPSC,” reads the company’s recall website. Last November, it called the CPSC’s warning about Onewheels “misleading” but stated it would “work to enhance the CPSC’s understanding of self-balancing vehicle technology and seek to collaborate with the agency to enhance rider safety.”
To install the update, owners must connect their Onewheels to the accompanying app and run a firmware update — the process is fully explained in a new video.
For early adopters, however, owners can receive a “pro-rated credit of $100 to the purchase of a new board,” according to Mudd. The credit will only be issued after owners confirm that they have disposed of the old model.
Alongside Future Motion’s blink on the decision to recall Onewheel, the company shared a new video on YouTube highlighting the new Haptic Buzz feature as well as best practices when riding. “We’ve been working closely with the CPSC for over a year in order to develop this new safety feature,” Mudd says in the video. He adds that ignoring pushback or Haptic Buzz “can result in serious injury or death.” It took engineers a while to whip up Haptic Buzz; perhaps it’s something that would not have been ready in a timely fashion after CPSC’s first whistle last year.
Loose definition of a recall. Newer models are getting a software update. Older models are told to be thrown in the bin and get $100 credits to buy a new one
For early adopters, however, the CPSC and Future Motion are telling owners to stop using and discard the original Onewheel and Onewheel Plus.
For early adopters, however, owners can receive a “pro-rated credit of $100 to the purchase of a new board,” according to Mudd. The credit will only be issued after owners confirm that they have disposed of the old model.
$100 off of a $2000 replacement, the rest of which will have to be done out of pocket. "We're down with offering a recall, but we had to make sure it lines our C-suite's pockets first."
I mean car recalls often don't have the cars go fully back to the manufacturer, just to a dealer to have the part fixed or firmware updated.
For XR users they are flat out saying not to use your board until the firmware comes out, and for everyone else they're saying not to use them until you can update the firmware.
Honestly it's a little shady that the CPSC let them avoid issuing a recall until a firmware update was ready, but it sounds like they would have forced them to fully recall all models if they hadn't been able to come up with haptic feedback.
Aren't the early models the only ones that can actually be modified and repaired using consumer available parts? Seems kind of fishy to me that those are the only ones that are being binned.
Someone discovered they can gain repeat customers if they issued a "recall" and offered a money tree seed to those who have been the longest holdouts on updating.
I'm not super involved with the community but I thought vesc was starting to match futuremotion software, aren't the floatlife guys using vesc as daily drivers or something?
I don't know about garbage, but what actual monopolistic practices have they shown? Haven't they just cornered that market with a unique and superior product?
Watch Louis Rossman's videos for more details, but no. Onewheel is extremely litigious and were able to get a patent for the entire design of single wheel vehicles, so they can basically sue anybody for patent infringement just for making any kind of single wheeled vehicle.
It would be like if Ford got a patent for any machine with an engine and four wheels, and could sue any company that tried to create their own car.
They also have spent a ton of effort purposely making their Onewheel boards as tough to repair as possible. The earliest models of boards used a bunch of off the shelf parts and could be swapped, modded, and repaired by regular folks. They started writing their software to purposely brick any new boards detected if plugged in, so users couldn't buy a battery or motherboard from a broken Onewheel of the same model and use parts from it on to repair their current Onewheel.
They are super anti-consumer, anti-competition, and only are as popular as they are because of these practices. They innovate less and less and instead spend tons of effort making sure nobody else can create a better product. They also don't want users modding or repairing their products, because they can't monetize that.
Can't wait to see Rossmann's video on this one. Especially the part about how their idea of a recall is to tell people to throw away their device and buy a new one.
The difference as far as I could tell from the text would be that car accidents are usually the users fault while this is attributed to the products failure or bad usability.
many interesting conversations here and looks like a lot of folks who ride these often without issue.
I'm a motorized skateboarder for well over 15 years now. I've ridden one wheels a few times and while they are intuitive and versatile they are also the most dangerous option in an already very dangerous category. it's anecdotal, but all the worst injuries I've directly and indirectly confirmed were all from riding one wheels. I have lived on the edge and done plenty of dangerous things but owning a one wheel will never be one of them. the number of times I've had to be very nimble very quick would not have been possible on a one wheel. they simply lack the quick stability required to safely jump off from either foot and run out in any direction.
all that to say I'm not surprised that they have done some version of a recall and I'm wondering how they can legally sell them at all. yes, they are impressive vehicles and can be used relatively safely. but they are absolutely objectively more dangerous than 4 wheels.
I'd honestly just buy an electric 🛴 scooter first. A one wheel seems like a solution in search of a problem to me. But I've never been a skateboard guy.
What's the benefit of a one wheel over a four wheel skateboard?
I have one of each. I would say the benefit of the onewheel is a much cushier ride (giant, wide pneumatic wheel vs 4 smaller polyurethane wheels) and more maneuverability. The onewheel can tackle all types of terrain, which gives you a real sense of freedom while riding, whereas the 4-wheeler is pretty much limited to pavement/concrete (although you can put 7" pneumatic tires on 4-wheel boards that can accommodate them). Onewheeling is much more akin to that snowboarding feeling except you can pivot more since you only have a single point of contact with the ground, but there's not as much (any, really) of the lateral slide that you get on a snowboard, which can be both a plus and a minus.
If I want to go fast, I definitely grab the 4-wheeler. If I want to take a more leisurely pace/go explore offroad, I take the onewheel. I totally get and agree with what @fosho said about having to be very nimble & quick in a pinch, which is definitely true unless you're not going that fast on it to begin with. I rarely, if ever, exceed 15mph on the onewheel, but I can easily hit twice that on the 4-wheel board. Having to dodge something on that thing at that speed can be just as catastrophic as having the onewheel turn into a catapult at 15 mph. Both have their risks, and almost all of them can be tied to speed.
Prior to this update, the board gave "push back" tilting the nose up with the last of it's available torque when the user was going too fast and emitted a high pitched beep trying to let to user know to slow down or face a nose dive. The problem is, it was fairly easy to not notice the push back and the beep is completely inaudible when going 20mph due to wind noise. This update adds a physical vibration within the motor that the user can't help but feel when they're close to exceeding the limits of the board.
This is to stop everyone who has Re-Wheeled their boards. They did win a cease and desist to have the Re-Wheel software removed from the web by the author, but there are versions that still exist. I rewheeled a pint recently, and if I update that board, it will loose the modifications. FM is just up to their usual game of locking down their boards so folks can't mess with them. I'll be getting a Float Wheel when my XR finally dies.
Consumer Protection says the boards would fail to maintain balance and crash, if "limits" were exceeded. I'm guessing speed limits.
So the new models get a firmware update to prevent that/provide warning if you're approaching such a limit. The old models, which are more easily modded and perhaps unable to send haptic feedback, get tossed.
IIRC its more just poor notification of low battery.
If you're moving and the battery gets low it can not have enough power to keep the board stable. Early ones I feel like I remember hearing they would just 'stop'.
I've never understood what gap these things fill that isn't better filled by a bike. They look really fun, but as soon as I think seriously about it I can't see why I wouldn't want the exercise and mobility of walking or biking, and what I can't do with those is satisfied by my car.
Portability. You don't have to worry about bike racks, or how to carry it to the upper floors in apartment buildings and offices, and where to store it. You can just carry it like a briefcase and throw under the desk at the office and nobody would have a problem with that.
The answer to this is also the answer to where they were created, San Francisco. They're perfect there because:
Cars are a hassle to deal with for traffic and parking. It's dense enough and public transit is good enough that you only really need to walk/ride the last half mile.
The hills are no joke, I'm pretty in shape and even I have to walk a bike up most of the hills. This can be helped by an electric bike but that brings us to
Bikes get stolen fairly often. Especially if you have an ebike this will cost a lot in the long run. With a one wheel you can just carry it in the storeand not have to worry.
For most other American cities that are less dense, more flat and have less thefts they start to make less sense.