iFixit says the Switch 2 is even harder to repair than the original
iFixit says the Switch 2 is even harder to repair than the original
Be extra careful with your new console.
I really appreciate iFixit and how they help bring the discussion of repairability to the forefront.
Not surprised, given it's Nintendo. My Switch Lite has seen very little use since I got my Steam Deck, tho.
I mean yeah, I wouldn't expect otherwise. Nobody hates their fans more than Nintendo does.
Not surprising. Nintendo is turning into the Apple of the video game world.
Even Apple makes more repairable hardware.
Part of the difficulty is that Nintendo have hitsquads that will blow your city if you even look sideways at one of the screw.
I implore people to watch the teardown guide itself, which is way more nuanced than the clickbaity The Verge article.
I'm not a fan of the use of glue in the joycon sides and the fact that the color strips under the controllers are hiding screws. The bigger complaint is the battery glue, especially because you can imagine aftermarket parts with bigger capacity could be a thing here. I definitely wouldn't open this thing unless it has a problem.
Some components are still modular, which is nice. I can't imagine the sticks not having changed design is great, but it's entirely possible they're way more durable, which the teardown acknowledges. Keep in mind that, while all controllers can drift, most controllers don't fail that way. It's possible to build this type of stick without widespread issues. Time will tell, though.
The switch 2 gives out complete apple vibes. It's repairability is pretty horrid after watching the teardown guide.
Controllers will fail sooner or later and will have to be replaced. Here it will end up replacing the whole stick just due to glueing small parts of the controller.
Battery will also fail sooner than later. The whole thing yells planned absolesence...
It absolutely does not. Nintendo hardware is built like a freight truck. The teardown guide references the JerryRigEverything "durability test" and I am pretty sure unless you use it to bash someone's head in this thing will last (and even then).
What it reeks of is Nintendo wanting to make things cheap and sell you multiple of them. Which they do. My launch Switch 1 lasted until I got a Lite and then an Oled and I expect this one will do pretty much the same. That doesn't mean their joycon won't need fixing or replacing (and I did have to open and mod my Lite, which wasn't easy).
I think Nintendo hasn't adjusted its industrial design to modern repairability concerns yet, which is a very Nintendo thing (and definitely not the same as Apple artificially holding down the repair ecosystem to itself artificially). I like neither option, but I'd take Nintendo's approach over Apple's any day. They absolutely need to comply with modern right to repair regulations, though, and that will mean doing more than they're currently doing.
All the more reason for me not to purchase it.
After the initial excitement I think the Switch 2 is gonna bomb. Offers too little for too much.
Maybe if it was 349 or 399... but 499 is wild
Just yesterday I spent 3 hours playing MK8D on my PC. Cozy on my bed and a controller + a remote keyboard.
Felt like the real deal.Edit: Why the downvotes? Is emulation so frowned upon here?
The guy doing the teardown recommended you wait until a third party company makes a drift proof module to replace the same as last version joystick decoders
I wonder if Nintendo will ever embrace repairability like some phone companies have
I guess there's more competition in phones than in devices that can run Mario Cart
If you consider how hostile they are with everything else, I highly doubt it. Nintendo never again
Hope the drift issue is fixed. Ran into the issue with two of mine. The paper under the joystick hack didn't work and one of the brand new replacement joysticks I installed isn't responsive. 🙄
Spoiler alert: it's not. Same joysticks as last time.
It's the same joystick design. As the video says that doesn't mean it will have the same issues as frequently, but it does mean it can have the same issues. The question will be at what rate.
Given the coverage I have very low hopes that we will get a good idea of that from the press. Instead I expect the first Switch 2 joycon to drift will be put on an auction sale for every clickbait article to parade in front of people with rotten tomatoes at the ready. Still, it will matter if it's one in two or one in a million.
It's not, and the joycons are even HARDER to repair due to a piece of plastic glued over a screw on the inside..
Thanks to 3d printing I have litres of isopropyl. What sucks is you probably want to replace the glue since it's there to protect against liquids, and Nintendo don't care to provide a seal kit
You also need to remove stickers to get at the screws
Also you need a security screwdriver (three blade) for those screws
There are no replacement stickers, we wait for iFixit to provide guidance on adhesives
Congrats it's worse! Harder to get to :)
Just don't break it smh.
you forgot the /s
"smh" serves the same purpose here.
Oh good idea I hadn't thought of that
Haha when they did that blog post to change the switch from 8/10 to 4/10 saying they don't normally do that but wanted to make sure you could compare the 2 properly against the original, I thought they were making space for the 2 to be above the original, not that they were going to mark it as worse 😅
I honestly don't care how difficult it is, only if it's possible, if it's cost-effective, and if there are any fucking corporate shenanigans that intentionally make it harder.
From the teardown the only "corporate shenanigans" seem to be the usual soft security measures of hiding screws, having glue in a couple of places and using their security screws in the outer shell. I guess until we start seeing experimentation with swapping parts around we won't know if any pieces are signed to the board (something both Sony and Microsoft have been doing with optical media readers for ages, for example), but I'd be surprised. I assume iFixit have either tried or will try soon.
I think the difficulty matters, particularly for stick replacements. The Switch sticks weren't super easy to change but it was doable. I'd say this one is... harder. I'm hoping the sticks are more reliable, but I would seriously consider buying an aftermarket joycon before trying to replace a stick myself on this one. That's perhaps the one significant escalation I see here, and I will give it at least a bit of a pass in terms of difficulty because man, are the joycon insanely packed with stuff.