Okay I'll bite the bait. THE TOP ONE‽‽‽ What sick form factor are you using with vertical VGA ports?
You need to rotate your pc case if the VGA port isn’t vertical. The ground pins always need to be on top so all those grounding electrons weigh down the other conductors to make the data flow more quickly.
That's not true. VGA is a horizontal spec with the entire trapezoid housing being the ground contact. The data electrons to one side is due to the earth's axial tilt spinning them into a corner via healing crystals.
Uh no, the ground pins need to be at the bottom so they’re near the ground idiot
That's when you use the ports placed on the motherboard in a standard verical PC case, meaning the system uses integrated graphics for the visual output instead of deticated videocard. Videocards that are put into MB at 90° are horizontal, right, but in most office setups I handle they are rare nowadays. Videocards are almost exclusively installed when you handle 3d and content rendering in demanding apps, and for office and browser stuff they are too costy after the crypto price hike and in a sanctioned Russia.
Nettops have horizontal motherboards tho.
standard verical PC case
Excuse you! Standard PC cases are horizontal:
Desktop computers that have a vertically standing motherboard.
Many machines have vertical connectors, if the machine is turned for any reason. Or you're using the on-board card, etc.
I tighten both screws. With an impact driver. And a dab of LocTite for good measure.
Easy there, Satan!
Both every time but I also haven't used a VGA cable in at least 15 years.
Lucky you lmao
I still see them once every so often
In fact, I went onsite to a customer who wanted a new PC set up because the old one "wouldn't boot". Sure enough the cable was sticking out of the monitor at about a 15deg angle. I pushed the VGA cable in a bit extra hard and it came right back.
I was out of there in about 30min.
For quickly testing something: fuck screws.
For long-term use: both a tight as I can so I barely can unscrew them later because why not.
Long term use, at least one
Temporary, fuck the screws all together
And it was always temporary!
I've had less fall out than I had cases where the screw stuck in the socket and it started unscrewing out of the motherboard that I just gave up on them altogether
the one that still works
Yeah, there was always one broken on these fuckers
Who does just one? That's worse than not doing either. Since they're captive screws, doing just one can force the connector to wedge in crooked. I've had issues with tightening one too far before starting the threads on the other. Sometimes you have to go back and forth a couple times
Both, heathens dont bother and they reap what they sow.
Hahaha, I can't disagree, even as a heathen.
As others have said, depends on how permanent something is
Jesus Christ, both!! 😆 But only finger tight. Sod you bastards who get the screwdrivers out! That's overkill. 😁
Pro tip: It's a lot easier f you twist both knobs at the same time using the same motion as opening a bottle cap.
I loathe when the stand offs come out with the vga cable!!!!!
Hand tight, then torque wrench, 7-inch pounds.
Ever think you got it unscrewed and accidentally yank the standoff from the PCB?
Both
Well that's retro but I used to only screw in the side that's easier to reach because that already secures it while also allowing you to more easily unplug it again.
If it's for more than a minute I'll screw in VGA and DVI cables
VGA cables? You mean grappling hooks?
Both, three rotations after the threads catch.
One or none bears the risk of the connector coming out crooked and bending the pins, causing a potential alignment issue on the next connection and bending them further.
A school computer lab with a bunch of grubby-handed students touching and licking and who knows what to every surface? Yes, VGA cables get screwed down.
When I used them, I screwed both in usually.
Neither. Trip hazard.
I just use HDMI or DP
DP
BBC?
no, BNC
Lightly screw in one
And then replace my old shit and not touch anything but HDMI or DP for the last ten years.
Winner winner chicken dinner
The real answer is the top one fell out a long time ago.
I sure wish my external HDDs had screw in ports. Those things come loose if there's a change in air pressure.
My current job, we test products with these cables, we are required to screw in both when plugging it in, so both.
You have some code to do so?
I don’t screw them in unless it’s in a confined location where the cable is applying pressure to unseat, or if it’s fallen off at least once
It depends.
For my work computer, I screw them in tight, both on the monitor and the DP/VGA adapter.
For stationary devices (like overhead projectors) and extension cords, I screw them in, but not very tight.
For classroom computers, I only screw them in on the monitor and leave them unscrewed on the computer. Students can't keep their legs calm and often snag the cables. I prefer to let the connectors harmlessly disconnect instead of damaging the graphics card or motherboard.
That one standoff got loose 12 years ago, so none.
Otherwise, it's all HDMI and DP.One if somewhat temporary.
Both if I want 1-2% increase in performance.
Just one on each end.
Serial cables. How quaint.
Video graphics array connector and DB-9 connectors are not the same.
Having soldered many of both, I should have noticed. I literally just threw out a big pile of both that have been loitering in storage for years. I'm still surprised when old tech (for any random definition of "old") pops up.
🤦♂️
Neither, and I never once had the cable fall out. Just imagine the countless seconds I saved from not screwing and unscrewing.
if I HAVE to use vga, and its only being used for 1 computer, than both, else none if im only using it for temporary reason , none.
Context kind of matters for me, but if I'm screwing any in, it's both of them.
My monitors are on a swivel bar, and plug into the underside. Those get screwed completely in if the cable has screws. But on the desktop, since it doesn't really move and I've never yanked a cable, they're usually left loose.
I plugged one in today. I left the screws loose. Ironically I moved it between two computers that couldn't originally do VGA.
I re-organised my leisure desk. My C64 sometimes hooks up to a TFT thanks to my turbo chameleon 64 cartridge.
Today I hooked my C64 up to my CRT instead. I needed that TFT for my Amiga 1200 which has DVI-I out thanks to my indivision flickerfixer. But I have a DVI->VGA adapter to use that same cable.
Oooooh ! You !
I usually screw in both bolts but I still have an old laptop that I use on very rare occasions that doesn't have the screw holes for some reason.
Both, but the second always gets stuck before the end.
Are you fully tightening one side before starting on the other side?
