What are good harddrives to use with servers
What are good harddrives to use with servers
I have quite an extensive collection of media that my server makes available through different means (Jellyfin, NFS, mostly). One of my harddrives has some concerning smart values so I want to replace it. What are good harddrives to buy today? Are there any important tech specs to look out for? In the past I didn't give this too much attention and it didn't bite me, yet. But if I'm gonna buy a new drive now, I might as well...
I'm looking for something from 4TB upwards. I think I remember that drives with very high capacity are more likely to fail sooner - is that correct? How about different brands - do any have particularly good or bad reputation?
Thanks for any hints!
Buy recertified enterprise grade disks from https://serverpartdeals.com. Prices were around $160/16TB the last time I checked. Mix brands and models to reduce simultaneous failure. Use more than 1-disk redundancy. If you can't buy from SPD, either find an alternative or buy external drives and shuck them. Use ZFS to know if your data is correct. I've been dealing with funny AMD USB controllers recently and the amount of silent data corruption I'd have gotten if not for ZFS is ridiculous.
This is incredible!
American sites like this so rarely ship to France, or it costs a litteral fortune just in shipping, here it's 130€ for a 12TB shipping included!
Wow.
I Do Not Need A 12TB Hard drive.
I Do Not Need a 12 TB Hard drive!
I mean or do I?
Thanks 💖
Get more drives, run higher redundancy 💪
I use BTRFS for the same. Being able to check for and repair silent corruptions is a must (and this is without needing to read the whole drives, only the actual files). I've had a lot of them over the years, including (but not only) because of a cheap USB controller also.
Damn I just put 32 more TBs in my homelab and wish I would have known about this site.
Oh, wow. Just ordered a new computer. I guess it have to include some more disks!
Holy cow these are way cheaper than anything I have seen before. I am in a RAID 5 setup so if a disk or two dies I am okay.
Check out blackblaze drive stats, https://www.backblaze.com/cloud-storage/resources/hard-drive-test-data
This. They provide outstanding insights and the articles they provide alongside the data are quite good.
Any hard drive can fail at any time with or without warning. Worrying too much about individual drive families' reliability isn't worth it if you're dealing with few drives. Worry instead about backups and recovery plans in case it does happen.
Bigger drives have significantly lower power usage per TB, and cost per TB is lowest around 12-16TB. Bigger drives also lets you fit more storage in a given box. Drives 12TB and up are all currently helium filled which run significantly cooler.
Two preferred options in the data hoarder communities are shucking (external drives are cheaper than internal, so remove the case) and buying refurb or grey market drives from vendors like Server Supply or Water Panther. In both cases, the savings are usually big enough that you can simply buy an extra drive to make up for any loss of warranty.
Under US$15/TB is typically a 'good' price.
For media serving and deep storage, HDDs are still fine and cheap. For general file storage, consider SSDs to improve IOPS.
I'd like to second the 'manufacturer doesn't matter, all drives are going to fail' line, but specific models from manufacturers will have a much higher failure rate than others.
Backblaze, for example, publishes quarterly(ish?) stats showing the drives with the highest failure rates in terms of percentages, so you can kind of get a good view on if there's a specific drive model you should maybe avoid.
Or just buy an actual enterprise drive, avoid SMR, and have backups is also a sane approach.
Some manufacturers have lower failure rates overall. But yes, you do have to mind the specific model.
Do be aware that Backblaze drive access patterns will probably be quite different from yours. So if there's a really good deal on something with a bit higher failure rate, but your usage pattern is pretty tame, it may be worth taking the gamble.
Yeah I was more referring to huge outliers, like the 4? 6? Tb seagates they had a few years ago that were like 25% Afr.
I’d start with Backblaze’s 2023 drive report
Interesting that Toshiba/Seagate has best 16TB stats and WDC bad ones in comparison, but for 14TB it's reversed. My homelab disks apparently has 0.71% risk of dying after 22 months (seagate exos x16 st16000nm001g).
edit: WDC does good in 16TB too, their only outlier there could be due to low number of disks in deive count. And the same is true when checking total no of disks for 14TB.Those 14TB WD drives are workhorses. I run refurbished ones in my home server and have never had any issues. And they are significantly faster than the rest of my spinning rust drives.
There are two types, CMR and SMR. You can read online about the differences. CMR is better because SMR tries to be all fancy in order to increase capacity, but at the cost of speed and data integrity.
It won't be front and center in the specs of a particular drive, but you usually find the info somewhere.
I wouldn't worry about higher capacity failing sooner. If you have 10x4TB vs 2x20TB, that's 5x as many drives to go bad. So a 20TB drive would need a 5x worse fail rate to be considered worse. A pro of larger (fewer) drives is lower power consumption. 5-10 watts per drive doesn't sound like much, but it adds up.
If you are buying used datacenter drives, larger capacity drives are also likely to be newer, which tips the scales a little more in that direction.
I don't think anyone makes SMR drives in the current lineups anymore.
That's good
I've heard very good things about resold HGST Helium enterprise drives and can be found fairly cheap for what they are on eBay.
I'm looking for something from 4TB upwards. I think I remember that drives with very high capacity are more likely to fail sooner - is that correct?
4TB isn't even close to "very high capacity" these days. There's like 32TB HDDs out there, just avoid the shingled archival drives. I believe the belief about higher capacity drives is a question of maturity of the technology rather than the capacity. 4TB drives made today are much better than the very first 4TB drives we made a long time ago when they were pushing the limits of technology.
Backblaze has pretty good drive reviews as well, with real world failure rate data and all.
I run only used hgst. I have 6 x 3tb drives that are all 90k hour plus and I recently expanded to some new to me 12tb hgst. I always do badblocks test when I get the drive which took 4 days on the 12 tbs. One of them failed and I returned it to Amazon they shipped another and the replacement was perfect. If they package it poorly just return it right away and choose a different distributor.
One thing no one will tell you HOW LOUD some HDDs could get under load. You may not want any of those disks around if you’re keeping your server around your living spaces.
Just check dB values in the spec sheets.
That's a good hint, although I wouldn't mind too mich. personally. My server is located in the basement.
Depending on the use, you may be able to spin then down when not in use, but that's not always possible for some applications.
My last I have bought are the Toshiba N300 15tb helium drives.
Didnt write much to it but they were cheap and seemed quiet enough to have around in my room (where I also sleep)Those are great drives but I would not want one of those in the room where I sleep haha
I have and while they sure are loud, dampening the NAS with foam tape (had some double adhesive tape from buying LED strips laying around) quietened it enough to be managable.
One important thing, ensure the drive is CMR, the reason is that you likely want a RAID, and non-CMR disks take so long to read the entire disk that the chances of a second failure while recovering from a disk failure is significant.
That being said, how are you keeping track of the disks state? I built my RAID recently, and your post made me realize that I have nothing to notify me if one of the disks shows early signs of problems.
I just use the built-in email function that comes with mdadm. If a drive fails, I'll know right away and replace it with a spare. You do need your server to be able to send emails with something like postfix.
If you have hardware RAID, there's often a monitoring tool that comes with it or at the very least a command-line utility that can report the RAID state which you can then use in a script.
I don't keep track actively. I noticed problems when reading a file and looked at the drive with smartctl for that reason. Does anybody know how to keep track actively?
At home I use two Toshiba MG09ACA18TE's and they work like a charm. I've bought them at around US$20/TB and it was the best price/TB offer at that time.
At work we use Exos X18's and Exos X20's without any problem at all.
I use Seagate Ironwolf 4TB drives in mine. Bought them all used, $50-60 each. Check on eBay and Facebook marketplace
I’m looking for something from 4TB upwards.
If you say "harddrive" ... do you mean actual harddrives or are you using it synonymous with "storage"? If you really talk about actual harddrives, it's hard to even find datacenter/server harddrives below 4 TB. Usually server HDDs start with 8 or 12 TB. You can even find HDDs with 20 TB - Seagate Exos series for example, starting at around 360 Euros (ca. 400 USD).
If you're in for a general storage, preferably SSD, that's another issue. There is the Samsung 870 QVO (8 TB) SSD that is often advertised as "datacenter SSD" (so I assume it would run well in a server that is active 24/7), but it is currently available with a maximum of 8 TB. The 870 QVO is at ca. 70 Euros per terabyte (ca. 77 USD) which, in my experience, is the current price range for SSDs. So it has a high price seen from the outside but it's actually fine. It's also a one-time investment.
For selfhosting I'd go with an SSD-only setup.
do any have particularly good or bad reputation?
From personal experience I'd say, stick with the "larger" brands like Samsung or Seagate.
SSD only?
Look at Mr Moneybags over here. That would increase my cost about 400%
And no, I wouldn't recoup that in energy cost reductions, as my oldest NAS with ancient drives only draws a few watts 97% of the time.
Sorry, I can't hear you under my enormous piles of money! 🙃
But yeah. You should do an SSD-only setup if this is within your budget. I assume that for most of us selfhosting is just some soft of hobby. If you're willing to spend money on the latest and cooles tech: do it. If not, then it's fine, too.
I would advice against using SSDs for storage of media and such. Not only because of their higher price, but also because flash memory cells tend to fade over time, causing read speeds to decrease considerably over time. This is particularily the case for mostly read-only workloads. For each read operation the flash memory cell being read loses a bit of its charge. Eventually the margin for the controller to be able to read the data will be so small, that it takes the controller lots of read operations to figure out the correct data. In the worst case this can lead to the SSD controller being unable to read some data alltogether.
I have an external usb hdd , wd passport 3TB from 10 years ago (healthy) connected to a Chinese N100 mini pc. I have proxmox on it, 5 lxc containers, 30 docker containers running apps, plex, calibre web.
I would say Seagate Exos or Western Digital Ultrastar.