Aqara joins Works with Home Assistant
Aqara joins Works with Home Assistant
www.home-assistant.io
Aqara joins Works with Home Assistant
19 comments
-
-
This is awesome news. :)
-
I use zigbee and their sensors just keep dropping off the network
-
interesting. theirs are pretty much the only reliable sensors I found
-
That's weird to me. I have 30 aqara devices and they only drop off the network when the controller is missing (ConBee stick).
-
may wanna check your wifi & zigbee network collisions, your network map or make sure you don't something like a 2nd hub or something like that
-
Fortunately my thermometers donβt do that, because they are a good choice, Zigbee wise. Always on the lookout for replacements, if the need arisesβ¦
-
Aqara devices can be finicky with non-Aqara devices, especially router devices.
I've personally also had much better results with Aqara devices since switching to Zigbee2MQTT and a Sonoff Zigbee stick, I had a lot more dropouts with ZHA and a Conbee II stick.
-
If you happen to use a Conbee II: I had this issue until I updated the firmware. Has been rock solid with aqara devices after that.
-
My first zigbee device was Sylvania (73685) rgbw led strip. On it's own it worked fine but once I started trying to add sengled zigbee bulbs I kept having problems with pairing the bulbs or keeping them connected. Zigbee uses 2.4ghz so I thought maybe interference so lowered power output on wifi AP 2.4ghz band & even turned it off for testing but didn't help. I think I read somewhere that sylvanias caused that problem. I unplugged sylvania led strip, reset & rejoined everything else and had zero problems. Tried to add the sylvania back in and disconnect problems came back after awhile. It was past the return period so now I keep it unjoined and plugged into a zigbee smart outlet. I sometimes have to remove power from it to join new devices or when I restart zigbee controller. Currently have mix of sengled bulbs, thirdreality plugs, sonoff plugs & sensors, and single aqara tvoc all working together fairly reliably.
-
-
That's great. I recently got a pet feeder from them. My main criteria was that it works with ZigBee and home assistant.
Every other I have tried ends up failing with communication with their back ends, inevitably leading to a piece of unmaintainable trash.
Aqara worked immediately out of the box. Connected to my home assistant within minutes.
19 comments
New leak sensors that don't take magic incantations to connect when?
Sad, all they tried was bring some magic to the people and teach them basic spells and all we do is complain... When the dark lord attacks and none of us know any spells we're screwed
I have zwave water detectors that are pretty easy to pair. The only problem is that every time they reset, they trigger an alarm event. Fortunately, this only happens when I upgrade zwavejs, or change the batteries, so the false positives are not random. Still, it's a weird design decision.
What brand and model are those? I have a Z-wave radio on my HA.