I hate ASUS. Used to be way in on them -- well not way but relatively. I had the ASUS ROG Phone. The screen unfortunately broke and needed to be sent into service. More unfortunate, it was just about 1 month out of warranty.
So I get it set up to send it. ASUS charges me $300 for the phone screen replacement. It took over 8 months for them to get it back to me. When the phone finally did arrive, the RGB lighting didn't work, the NFC didn't work, and the screen itself had an orange hue in the upper right corner. To boot, it would only connect to AES Wi-Fi networks, so I can't even use it without a SIM card because who the fuck uses AES. They didn't even fucking fix it properly. I never got responses, sending e-mails for months after it was finally returned to me.
Now, in this time I was really patient. I was using a temporary phone. Around month 5, I just needed a new phone and was looking into the newly released ROG Phone 2. I figured the ROG 1 would still get plenty of usage as a spare device. Well I had the ROG 2 until AT&T decided that the phone didn't have the supported bands anymore, so my >1 year old phone is now as effective as an iPod 3g. Just 6 months later, screen itself just died, no fall, no nothing. I can use SCRCPY to use it, the screen just doesn't work. I really, really tried to give them a shot and the benefit of the doubt.
Now, in between these ~2 years I'd accumulated a few accessories for the phones, keycaps and backpacks. Just little things -- ngl, the bag and the keycaps are still really good quality. I also decided to upgrade my PC, and was looking at a nice new motherboard to rebuild my existing PC with.
So I get the ASUS B550 or something like that. Stupidly bought it from Newegg, first time. The motherboard arrives and upon building the computer I just cannot get it to POST. I reach out to the 2 likely culprits, the PSU and the MoBo. EVGA sends me an entirely new PSU, free of charge, and tells me not to bother shipping it back. ASUS on the other hand would not accept that the motherboard could have been the point of failure! And when I FINALLY was able to fully prove that every single component in the board works EXCEPT the MoBo, they told me to take it up with where I purchased it from, Newegg. So I would get to pay some ~20% restocking fee on a broken motherboard, instead of the manufacturr just replacing a defective board. Oh, the best part? The motherboards USB-3.0 header was broken, came right off when trying to plug it in. No wonder it wouldn't POST.
Fuck you, ASUS. Fuck your shitty warranty, your awful customer support, your horrible treatment of customers who put their trust into you. I will never support ASUS again and I will always vehemently suggest anyone else. It's really, really simple to be a good OEM, all it takes is replacing things that break. ASUS treats every single customer like a scammer who is trying to get free stuff out of them, which IMO just goes to show that's exactly the mindset ASUS has as well.
I still have the motherboard btw. If anyone knows how to repair a USB-3.0 header I'll either be glad to be guided through a repair or I'll just send it to you for cost of shipping. It's just going to sit in my garage otherwise.
Going to corroborate this with that I had a really similar experience with my old Sabertooth 990FX board. Was supposed to support Bulldozer, and they put out a BIOS update the night before Bulldozer launched. I grabbed the update, put it on a flash drive, and updated the board. It would never post after that. RAM, CPU (FX6100), graphics card were all reseated multiple times. Never even gave post beeps, so there wasn’t even a hint as to what was going on. Even tried a different PSU just to be safe.
ASUS told me to get shafted because they couldn’t guarantee I updated the BIOS safely.
CompUSA exchanged it with a pre-updated board, no questions asked.
Lol, yeah. The ROG line of phone has an RGB backlight with the ROG logo.
Honestly, I liked it. Could be configured to per-app notifications, and could be synced to other phones that had it. Not that I ever got to use this feature, it was returned to me BROKEN! lol
Reattaching the connector is relatively easy. But unless the pcb itself is really mangled, a missing connector won't affect the computer POSTing. Can you send a closeup of where the connector should be?
It's in my garage at the moment, but from memory (it's been a year or two now) the USB-3.0 header straight up fell off. The PCB should be fine, which is why I have a feeling that I could likely just resolder it, so long as the pads themselves on the PCB were ok.
I'll see if I can find some time this week to dig it out and share a photo, thank you for the offer!