Prusa MK3s+, PETG and a 0.6 nozzle
Prusa MK3s+, PETG and a 0.6 nozzle
![the background blur](https://lemmy.world/pictrs/image/2c32152c-f218-470a-87ca-ad8abc619c86.jpeg?thumbnail=256&format=webp)
![](https://lemmy.world/pictrs/image/2c32152c-f218-470a-87ca-ad8abc619c86.jpeg?thumbnail=1024&format=webp)
Hey everyone.
I built an mk3s+ from its kit form successfully, tested a few PLA prints with the stock 0.4 nozzle.
I've set prusaslicer to use a 0.6 nozzle now that I've upgraded, and am using PETG. Prints look pretty bad, in spite of calibrating z-offset etc.
If you were doing something like this for the first time, what would your setup steps be like?
To be specific, using a diamondback 0.6 nozzle, matterhackers PETG at 235c.
Issues I'm seeing are a really bad loss of detail, lots of stringing, etc.
eta: added a photo of a moderately post-processed part. Notice how rough the top surface looks, there's a disconnect between perimeter loops, etc.
You're viewing a single thread.
Is there a nozzle setting in the printer too?
2 0 ReplyThis is my guess based on OP not mentioning changing printer profiles or rerunning a wizard.
1 0 ReplyIt's been set to 0.6 on both printer and slicer during the setup process.
3 0 Reply