Home Assistant
- www.hackster.io PwrTool 500 Integrates High DC Current and Battery Monitoring Into Home Assistant
Open source DC power shunt monitors circuits up to 60 volts and 500 amps.
- SONOFF SNZB-05P review - A Zigbee water leak sensor tested with eWelink and Home Assistantwww.cnx-software.com SONOFF SNZB-05P review - A Zigbee water leak sensor tested with eWelink and Home Assistant - CNX Software
Today, we will review another new sensor from SONOFF, the SNZN-05P Zigbee water leak sensor. This is SONOFF's first-ever water leak detection sensor. In
- Zigbee Coordinator CC2652P7 1.0 runs open-source firmware, works with Zigbee2MQTT, Home Assistant, and ioBrokerwww.cnx-software.com Zigbee Coordinator CC2652P7 1.0 runs open-source firmware, works with Zigbee2MQTT, Home Assistant, and ioBroker - CNX Software
The cod.m Zigbee Coordinator 1.0 (CZC 1.0) is a hybrid ZigBee coordinator that can be used to connect devices over a network (Ethernet/Wi-Fi) and USB. The
- Maker Go ESP32-C6-EVB quad-relay board supports Wi-Fi 6, BLE 5, Zigbee for smart home applicationswww.tindie.com ESP32-C6-EVB WIFI6 Support tasmota 4 relay 4input by Maker go on Tindie
Support tasmota ESP32-C6-EVB BOARD WITH WIFI6 BLUETOOTH5 LE AND ZIGBEE CONNECTIVITY FOR MATTER AND SMART HOME WORK
- SONOFF Zigbee Bridge Ultra Review - eWelink app, Matter Bridge, Turbo Mode for extended range, and Home Assistantwww.cnx-software.com SONOFF Zigbee Bridge Ultra Review - eWelink app, Matter Bridge, Turbo Mode for extended range, and Home Assistant - CNX Software
Review of the SONOFF Zigbee Bridge Ultra Review using the eWelink app, Matter Bridge mode, range testing with Turbo Mode, and Home Assistant
- Nordic nRF52840-based True Wireless Valve is a USB or battery powered valve for home water managementwww.cnx-software.com Nordic nRF52840-based True Wireless Valve is a USB or battery powered valve for home water management (Crowdfunding) - CNX Software
True Wireless Valve from Uhome Systems is a battery-powered, smart valve that is easy to install and integrate into your smart home setup. It is based on
- How Home Assistant is being used to protect from missile and drone attacksdenysdovhan.com Home Assistant Config by Denys Dovhan - War Safety
🏡 My home automation setup built with Home Assistant
- SONOFF SwitchMan M5 Matter Review - A Matter Smart Wall Switch tested with eWelink, Apple Home, and Home Assistantwww.cnx-software.com SONOFF SwitchMan M5 Matter Review - A Matter Smart Wall Switch tested with eWelink, Apple Home, and Home Assistant - CNX Software
We received the latest Smart Wall Switch from SONOFF, called the SwitchMan Smart Wall Switch-M5 Matter, which we will refer to in short as M5 Matter. This
- hackaday.com Home Assistant Display Uses E-Ink
[Markus] grabbed an ESP32 and created a good-looking e-ink dashboard that can act as a status display for Home Automation. However, the hardware is generic enough that it could work as a weather st…
- Mike Norgate's Airlytix ES1 Is a Feature-Packed ESPHome-Powered Environmental Monitordocs.airlytix.io Airlytix Documentation
Learn how to set up and use your Airlytix sensor for optimal air quality monitoring in your smart home.
- NanoCell Aims to Deliver the Perfect ESP32-C3 Board for Battery Projects. Adding just 66.1μA to the Espressif ESP32-C3's power draw, this compact dev board offers easy Home Assistant integration.github.com GitHub - Frapais/NanoCell-C3: This is the repo of my NanoCell-C3 project, which includes an ESP32 development board I made to simplify the creation of small battery-powered devices for use with Home Assistant and ESPHome.
This is the repo of my NanoCell-C3 project, which includes an ESP32 development board I made to simplify the creation of small battery-powered devices for use with Home Assistant and ESPHome. - Fra...
- Ben Brooks' Espressif ESP32-Based Beehive Monitor Gets His Buzzy Friends Talking to Home Assistanthackaday.io Beehive Monitor
Having a beehive (or multiples) is a very rewarding hobby, and not just the possibility of obtaining some of the best honey you will ever taste! Watching your hive grow is half the fun, but opening your hive to see what’s happening more than necessary isn’t ideal. Having had bees off and on multiple...
- Review of SONOFF SNZB-06P human presence and SNZB-04P door/window Zigbee sensorswww.cnx-software.com Review of SONOFF SNZB-06P human presence and SNZB-04P door/window Zigbee sensors - CNX Software
Review of SONOFF SNZB-06P human presence and SNZB-04P door/window Zigbee sensors with eWelink app and Home Assistant (ZHA and Zigbee2MQTT)
- www.hackster.io Home Assistant is now an Open Home Foundation Project — As Its Creators Cast a Wider Net
Acting as a parent organization for Home Assistant and over 240 other projects, the Open Home Foundation sets its sights high.
- Ryan Murphy's Line-Power Smart Thermostats Expand Off-the-Shelf Sockets for Home Assistant Heatinggithub.com GitHub - rjmurph2241/baseboard-heating-thermostat: Converstion of a smart wall switch to a line voltage (baseboard heating) thermostat for ESPHome & Home Assistant
Converstion of a smart wall switch to a line voltage (baseboard heating) thermostat for ESPHome & Home Assistant - rjmurph2241/baseboard-heating-thermostat
- SONOFF POW Ring Review - A WiFi CT Clamp power meter tested with eWelink and Home Assistantwww.cnx-software.com SONOFF POW Ring Review - A WiFi CT Clamp power meter tested with eWelink and Home Assistant - CNX Software
The trend of measuring the energy usage of household electrical devices has become increasingly popular among Smart Home users in the past few years. We
- Pine64 introduces the PineVox a home assistant smart speaker. Designed to help build a good community option for voice interactions with software such as Home Assistant.pine64.org March Update: Making waves
Long awaited community update is here! Introducing PineVox and bone conduction headset (help us find a name!), IronOS progress, PineNote insights, and PineTime news! We also cover cluster failure, state of services, and the future of the community updates. See you in the upcoming Q&A!
- Introducing CHAI – a CAME gate controller to Home Assistant Interface IoT ESP8266blog.adafruit.com Introducing CHAI – a CAME gate controller to Home Assistant Interface #IoT #ESP8266
CHAI is an interface to control a CAME gate controller from Home Assistant using ESPHome. I have a parking gate with a Came BXV controller and wanted to fully integrate it with a home automation sy…
- Alistair Francis Hacks a Husqvarna Automower 305 for Bluetooth-Driven Home Assistant Controlwww.alistair23.me Reverse Engineering Husqvarna Automower BLE Commands
How I reverse engineered the Bluetooth commands used to remotely control a Husqvarna Automower
- Review of SONOFF SNZB-03P new Zigbee motion sensor with eWelink and Home Assistantwww.cnx-software.com Review of SONOFF SNZB-03P new Zigbee motion sensor with eWelink and Home Assistant - CNX Software
Review of SONOFF SNZB-03P new and improved Zigbee 3.0 motion sensor using both eWelink app and the Home Assistant framework.
- hackaday.com Haier Europe Eases Off On Legal Threat And Seeks Dialogue
After initially sending a cease and desist order to [Andre Basche] – the developer of a Haier hOn plugin for Home Assistant – Haier Europe’s head of Brand and IoT has now penned a…
- Zigbee Home is an ESPHome-like firmware project for Zigbee deviceswww.cnx-software.com Zigbee Home is an ESPHome-like firmware project for Zigbee devices - CNX Software
Zigbee Home firmware project aims to provide similar functionality to ESPHome open-source firmware, but for Zigbee devices based on Nordic Semi nRF52 wireless microcontrollers, and later on the newer nRF53 MCUs. The firmware relies on Nordic Semi ZBOSS for Zigbee 3.0 stack and should eventually ena...
- Haier, the air conditioner maker, takes down open source third-party Home Assistant integration
cross-posted from: https://lemmy.world/post/10882099
> Thankfully I don't use any of their products, but this really pisses me off. They claim that this open source project "causes significant economic harm to their company" > > This is ridiculous. It is truly ridiculous. How can something that enables the user to efficiently control their AC cause "significant economic harm"??? > > Consider forking the repository or mirroring it to another platform like GitLab, Codeberg or your self-hosted Git server, so the project can continue to exist and someone can maybe fork it and maintain it. > > The effected repos are: > https://github.com/Andre0512/hOn and https://github.com/Andre0512/pyhOn > > If you don't know about Home Assistant, check it out. It's an amazing piece of open-source software, that you can run at home on your own server and use it to control your smart home devices. That way, you don't need to connect them to the manufacturer's (probably insecure) cloud. It gives you sovereignty over your smart home instead of some proprietary vendor-locked garbage. Check out their website and the Lemmy community: !homeassistant@lemux.minnix.dev > > I also highly recommend Louis Rossmann's video about this: https://youtu.be/RcSnd3cyti0 > > He makes awesome videos in general, consider subscribing. > > As Rossmann said, don't ever buy anything from such a shitty company that doesn't respect their customers. This move by Haier is nothing other than a slap in the face for everyone, who just wants to comfortably control the product they paid for. This company is actively hostile towards their paying customers. Fuck these bastards!
- www.hackster.io An Espressif ESP32-Powered "Virtual Keypad" Adds Home Assistant Support to a DSC Neo Alarm System
Wired into an otherwise-unsupported control panel, this clever add-on provides full Home Assistant integration.
- hackaday.com How To Build A Fully Offline Smart Home, Or Why You Should Not
So-called ‘smart home’ appliances and gadgets have become an ever-more present thing the past years, with nary a coffeemaker, AC unit or light bulb for sale today that doesn’t hav…
- ESPHome compatible "Smart Powermeter" supports up to 6 CT clampswww.cnx-software.com ESPHome compatible "Smart Powermeter" supports up to 6 CT clamps - CNX Software
The "Smart Powermeter" ESP32-S2 board measures power consumption via six CT clamps, supports ESPHome firmware for Home Assistant integration
- See How This Smart Kettle Intelligently Schedules Water Heating with an ESP8266 and Home Assistantwww.hackster.io See How This Smart Kettle Intelligently Schedules Water Heating
Swapping a switch for an ESP8266 and relay lets this kettle automatically heat water in conjunction with a Home Assistant automation.
- SONOFF iPlug S60 - A $10.9 compact WiFi smart socket with built-in energy monitoring functionwww.cnx-software.com SONOFF iPlug S60 - A $10.9 compact WiFi smart socket with built-in energy monitoring function - CNX Software
SONOFF iPlug S60 is a compact ESP32-C3-based WiFi smart socket with built-in energy monitoring support and available with either Type E/F or Type G prongs
- www.homeautomationguy.io Making my own Bed Sensor — Home Automation Guy
I recently created some “bed sensors” for my smart home that detect if one of us, or both of us, is in bed. I use a couple of pressure mats that detect when weight is applied to them, and stuck then under our mattress at around hip level and these tell my Home Assistant home automation platform if
- Seeed Studio mmWave sensor kit - Part 1: unboxing and first impression with ESPHome and Home Assistantwww.cnx-software.com Seeed Studio mmWave sensor kit - Part 1: unboxing and first impression with ESPHome and Home Assistant - CNX Software
Excited to share my first review, written for CNX Software! This time, we're diving into the Seeed Studio mmWave Human Detection Sensor Kit, which
- Silicon Labs partners with Nabu Casa to support Home Assistant developmentwww.cnx-software.com Silicon Labs partners with Nabu Casa to support Home Assistant development - CNX Software
Silicon Labs has entered an official partnership with Nabu Casa, the company behind the popular Home Assistant home automation software, to support the
- RoomSense IQ - An ESP32-S3 modular room monitor with mmWave radar presence detectionwww.cnx-software.com RoomSense IQ - An ESP32-S3 modular room monitor with mmWave radar presence detection (Crowdfunding) - CNX Software
RoomSense IQ is a modular room monitor for presence-based home automation based on the ESP32-S3 module with Bluetooth Wi-Fi connectivity. It uses physical