I already had the rules for a pretty long time, but i simply did not test it out. It is very high on my list though.
Haven't had much time to play recently, but i am working on 15mm minis and vehicles for Bolt Action and i plan to try out Chain of Command and Nuts sooner or later.
Thanks. I think i have not highlighted this thing enough. Compared to my other German vehicles (Which are dark, but the kind of i prefer and intended to have) the dry-brush is nearly not noticable.
The above link includes one of the most accurate OOBs for the Late Cold War NVA that currently exists. It sadly is in German, but still can help with many questions, regarding positioning, equipment etc.
Sooner or later i will compile a stickied post for ressources, similar to the post about minis, but for now i will some shorter single posts.
Edit: I linked to the wrong OOB. Corrected it now.
![the background blur](https://lemmy.world/pictrs/image/5966c46d-9ce9-4d84-878c-fbf17ac8d5ab.jpeg?thumbnail=256&format=webp)
![](https://lemmy.world/pictrs/image/5966c46d-9ce9-4d84-878c-fbf17ac8d5ab.jpeg?thumbnail=1024&format=webp)
The above example shows a pretty important thing for us wargamers, namely that the same mistakes we make in camo painting also happened in real life too.
![the background blur](https://lemmy.world/pictrs/image/2e82cd7a-fd47-4aed-b289-6bab54c53df3.jpeg?thumbnail=256&format=webp)
![](https://lemmy.world/pictrs/image/2e82cd7a-fd47-4aed-b289-6bab54c53df3.jpeg?thumbnail=1024&format=webp)
A pretty unique camo from the early 80s. The Leopard 2 seems to have been camouflaged with light spots (Maybe sand coloured).
![the background blur](https://lemmy.world/pictrs/image/740218fc-f3e9-4395-a63e-54b786a11a0f.jpeg?thumbnail=256&format=webp)
![](https://lemmy.world/pictrs/image/740218fc-f3e9-4395-a63e-54b786a11a0f.jpeg?thumbnail=1024&format=webp)
This is a 3d printed (FDM, not resin by the way) tank for my German forces. At this point it still lacks a bit of weathering but i like how the camo scheme turned out.
![the background blur](https://lemmy.world/pictrs/image/963a578e-fc57-40cf-922c-394ffb115f80.jpeg?thumbnail=256&format=webp)
![](https://lemmy.world/pictrs/image/963a578e-fc57-40cf-922c-394ffb115f80.jpeg?thumbnail=1024&format=webp)
Another piece of inspiration: This makeshift camouflage was often seen on West German vehicles until the 3-colour scheme replaced the earlier single-colour "Gelboliv". Done by vehicle crews it had no formalized pattern and can serve as a nice alternative to single colour German vehicles in your army.
![the background blur](https://lemmy.world/pictrs/image/8bb4d766-e02f-4528-baae-0edc56f1eba5.jpeg?thumbnail=256&format=webp)
![](https://lemmy.world/pictrs/image/8bb4d766-e02f-4528-baae-0edc56f1eba5.jpeg?thumbnail=1024&format=webp)
West German Bundesgrenzschutz (Federal Border Guard) men firing an MG1 machine-gun. BGS troops used a derivate of Wehrmacht "swamp-camo" until 1976, when it was replaced by new green uniforms. Despite that some units have not received new green uniforms until the late 70s or early 80s.
Wargaming the West German BGS requires some kitbashing, which can be achieved best with Cold War West German troops, making use of the G3 rifles, the MG3 (Which stands in for the BGS MG1) and Uzis. An easy headswap with WW2 German troops can represent the older style helmets and field caps. Other weapons like the tripod mounted MG1, the medium mortar or the "Blindicide" recoilless rifle can be represented with WW2 MG42s, Wehrmacht medium mortars and Panzerschreck teams.
I am working on a large scale colour guide for uniforms and vehicle colours (Though i am doing it slowly and on the side, next to other projects).
https://workupload.com/file/MB7qX472yxz
I uploaded the current state as a preview here. Feel free to tell me how and if you like it!
![the background blur](https://lemmy.world/pictrs/image/f54b77b6-90ae-4b2d-b8ac-3771f873c53c.jpeg?thumbnail=256&format=webp)
![](https://lemmy.world/pictrs/image/f54b77b6-90ae-4b2d-b8ac-3771f873c53c.jpeg?thumbnail=1024&format=webp)
Two 3d printed Luchs 1A2 wheeled recon vehicles. Those two are on the lookout for East German troops, during a game of my custom Bolt Action Cold War ruleset.
![the background blur](https://lemmy.world/pictrs/image/1ec7947f-319c-4ba2-8a81-4ab660646f70.jpeg?thumbnail=256&format=webp)
![](https://lemmy.world/pictrs/image/1ec7947f-319c-4ba2-8a81-4ab660646f70.jpeg?thumbnail=1024&format=webp)
A group of Panzer IV driving towards the american troops. All of them met a fiery demise in close combat with a group of Shermans.
I am building an undead army for Warlords of Erehwon, planning for a custom Undead Pirate army and writing army lists for WoE. It appears that i am definitely hooked right now.
![the background blur](https://lemmy.world/pictrs/image/ae7e27f1-fbd2-48d6-9f32-676906d301fb.jpeg?thumbnail=256&format=webp)
![](https://lemmy.world/pictrs/image/ae7e27f1-fbd2-48d6-9f32-676906d301fb.jpeg?thumbnail=1024&format=webp)
This Tiger I was destroyed by a 76mm Sherman during my first 15mm Bolt Action game. Both surviving Tigers were also killed by the same Sherman. A true ace Gunner!
As cold war minis are not as ubiquitous as WW2 or fantasy minis i made a list for sourcing everything needed. I will try to keep the list updated. Any help or suggestions are appreciated.
The List:
-
QRF Miniatures: Large source for 15mm vehicles and minis, including minor nations
-
Skytrex Miniatures: Some US, British and Soviet vehicles, including rarer Soviet command, FIST and radar vehicles
-
Battlefront Miniatures: Team Yankee range, basic range of infantry and vehicles for major and some minor nations, including plastic miniatures
-
Peter Pig Miniatures: Vietnam War miniatures for both sides, including vehicles. “Modern Africa” range, suitable for African conflicts
-
Quality Castings: Nice ranges for WP vehicles and Infantry, Vietnamese, North Koreans, Mid-East forces, US and British.
-
Flashpoint Miniatures: Large range of Vietnam era miniatures, 90s era US miniatures (Ranger/Delta Force), Somalians and Taliban
-
Roskopf Modelle: Good source for West-German vehicles, must be sourced from eBay though, because the company is defunct.
-
Oddzial Osmy: Good source for Polish and Soviet infantry
-
Thingiverse and Cults: Quite a lot of free vehicles can be downloaded, and 3D printed from there.
-
Etsy and Shapeways: Some useful 3D prints can be bought there.
-
Wargaming 3D: STLs for 3D printing can be sourced from there
-
ArmyBits: STLs for 3D printing can be sourced from there in addition to resin and metal models. A good variety of British, Soviet (Including VDV and Speznas) and US minis, including towed artillery and their crews.
-
Faller, Noch, Auhagen, Vollmer, Kibri: H0 scale buildings and accessoires, which also fit 1:100/15mm scale wargaming. Very useful for Cold War Germany/Central Europe.
![the background blur](https://lemmy.world/pictrs/image/3fbf96f5-a2f4-4967-91fa-3f8c2147ed25.jpeg?thumbnail=256&format=webp)
![](https://lemmy.world/pictrs/image/3fbf96f5-a2f4-4967-91fa-3f8c2147ed25.jpeg?thumbnail=1024&format=webp)
Kanonenjagdpanzer "tank destroyer", M48 tank (I sadly could not get a correct M48A2Ga2 .stl so i used the M48A5 as a stand-in) and M113 APC of the German Heimwehr. All models are 3d printed and still unfinished.
![the background blur](https://lemmy.world/pictrs/image/734fd781-a7f8-4c72-87c5-856dfc081c73.jpeg?thumbnail=256&format=webp)
![](https://lemmy.world/pictrs/image/734fd781-a7f8-4c72-87c5-856dfc081c73.jpeg?thumbnail=1024&format=webp)
Crashed V1 terrain piece made with a piece of leftover raft from 3d printing. There is also a hedgerow piece made out of flocking material and a scrub pad.
![the background blur](https://lemmy.world/pictrs/image/d0f6c1ae-6611-4ffd-bf90-54c0f2dcee49.jpeg?thumbnail=256&format=webp)
![](https://lemmy.world/pictrs/image/d0f6c1ae-6611-4ffd-bf90-54c0f2dcee49.jpeg?thumbnail=1024&format=webp)
Two 3D printed (Luckily my potato cam hides their layer lines) BRDM's for my late East German force. I chose the rather famous 3-colour scheme due to its projected increased use in the 90s, as i am often playing alternative history games.
![the background blur](https://lemmy.world/pictrs/image/5f54d793-83e6-41a8-8e87-4fbb85c0c6bc.png?thumbnail=256&format=webp)
![](https://lemmy.world/pictrs/image/5f54d793-83e6-41a8-8e87-4fbb85c0c6bc.png?thumbnail=1024&format=webp)
This is a a CSLA T-72M painted in a three-colour scheme that slightly resembles the modern czech army one. The CSLA made heavy use of different camo schemes, which is apparent in videos of Warsaw Pact excercises. This camo-scheme can serve as an inspiration for a late cold war CSLA force.
![the background blur](https://lemmy.world/pictrs/image/ecd8bdb0-d805-4d29-a4c7-de3334caad1e.jpeg?thumbnail=256&format=webp)
![](https://lemmy.world/pictrs/image/ecd8bdb0-d805-4d29-a4c7-de3334caad1e.jpeg?thumbnail=1024&format=webp)
A failed 3D print turned into a wreck. This West German Kanonenjagdpanzer did not come out as good as i wanted to, so i turned it into a wreck that can be used as terrain or objective marker.