You're viewing a single thread.
755
comments
9600, 8-N-1
Com port settings?
ya
- 9600 baud (signal changes per second)
- 8 data bits per packet (as opposed to 7)
- no parity bit (no error check)
- 1 stop bit per packet (packet ends here)
If internal, don't forget whether to use 3F8, 2F8, 3E8, or 2E8 and an unused IRQ. Any questions? Hit me up on ICQ
Uh Oh!
ATS0=1
.. or something..
ATDT *70,1234567890
Unless using Kermit and then 7E1 was standard.
755
comments