Best affordable RO system for coffee?
Best affordable RO system for coffee?
Prepare the perfect cup of coffee using our Barista Hustle water recipe. Also includes recipes for the official SCA water, WOC Budapest water and more.
I live in a super hard water region. So hard in fact that it destroys every appliance despite regular descaling. I've remineralized 5l jugs of demineralized water for years but I feel it's not very sustainable in the long term. Plus demineralized water is not supposed to be safe for human consumption.
I'm looking for an affordable RO system that removes most if not all TDS so I can remineralize it using my favorite recipe.
Do you use any? What are your thoughts? Thanks !
You're viewing a single thread.
The RO system is dependent on the membrane. Theres a level of standardization for membranes and pre-filters. This is an example: https://www.freshwatersystems.com/products/axeon-5-stage-ro-system-50-75-gpd Conversely, there’s a lot of branded systems that require special format filters and membranes (https://www.premierh2o.com/ro-pure-plus-voc-system), which can naturally only be sourced from the manufacturer. A good 4-stage system can be sourced for about $200 give or take.
RO was developed to desalinate water. Therefore, if you use a salt-based ion exchange water softener (the standard water softener) and then run that through an RO, it’ll be a pretty straightforward process. The more pressure you can provide up front (within the specs of the system), the more efficient the system will be. (Actually, it’s the pressure differential that really makes a difference, so if you’re pulling out one cup at a time, it’s less efficient than pulling out a litre). If your water is very hard, there will be more brine produced. There are ways to minimize that waste (effectively by injecting it into the hot water supply), if that’s important to you.
A distiller will have the same problems any boiler will have.
I’ve got a softener and a RO. It comes in between 450 and 550ppm and leaves around 30-70ppm. You typically want to see a >90% reduction; less than that and the membrane needs replacing or you may have pressure issues.