I looked through this community, and I didn't see much discussion of the use of CAD for woodworking, so I figured it was worth a post. I learned CAD ages ago, and I've used it sparingly in my professional life since then. I'm working on a project now that would benefit from CAD, so I figured I'd try to get up and running with a software for personal use.
I know sketchup and fusion360 have long been the major players for woodworkers, but I am wary of "free" personal use licenses that can be removed or degraded at any time. As this is Lemmy, I'm sure plenty of you are interested in FOSS options as well. I know there are some programs out there specifically for woodworking, but if I'm going to learn a new software, I want it to be more general purpose so I can use it to make things for 3D printing, etc, if needed. I also want something parametric to be able to easily change designs. For those of you unaware of what that means, it basically means that you can design things with variables instead of exact numbers. That way you can punch in numbers later on to easily update your design. In my case, I'm making cabinet doors in a few different sizes, and I'll be able to generate plans for different doors with only 1 model. Theoretically, I could upload the design for anyone else to use/modify as well on a place like thingiverse (someone give me a shout if they are secretly horrible or something, I'm generally wary of providing value to a corporation for free).
This all drove me to FreeCAD. FreeCAD is a FOSS CAD software that has a huge range of different capabilities. The different tools are divided into "workbenches" of different uses such as architectural drafting, 3d printing, openSCAD etc. There are also user created workbenches that you can install. There's even one specifically for woodworking (that I haven't used yet).
I've started into some tutorials, and most of them are focused on building a single widget. While that's great if you are planning on making something to 3d print, us woodworkers are usually assembling different parts. The tutorials for woodworking specifically I've followed along with so far seem to follow the same workflow:
First, a spreadsheet is set up to establish all the parameters you want to be able to change, then, each part is designed individually. Finally, all of the pieces are brought together and assembled.
While this is great if you already have a design in mind or an object, and you are trying to make a model of it, it's not the way I would ideally go about conceptualizing a new design. To make a nightstand, for example, my preferred methodology would be to assemble some simple rectangular panels to represent the top, bottom, back, front, left, and right. After those are in place, I'd start adding joinery, details like routed edges, and cutting out space for a door. It doesn't seem like freecad is necessarily set up to do things that way, though I could be wrong. This might even be how the woodworking workbench does things, I just figured I'd start learning the default workbenches first.
Anyone else use freecad or another CAD software? What's your workflow like? Want me to report back once I've had more time to play around with it and learn some stuff?
I know, I know... it ain't FOSS, but man it works really well and I have several industry standard certifications for it.
I have a fully fleshed out model of my house, and as I design things, I spacecheck to ensure a good for, and a good aesthetic. then I build the thing, and put it where I designed it to go.