“We just lost 3TB of data on a SanDisk Extreme SSD” - The Verge
“We just lost 3TB of data on a SanDisk Extreme SSD” - The Verge
Anyone else have a similar experience with one of these drives?
You're viewing a single thread.
I’ve been telling people for years that the entire 21st century is at risk of being a lost century. Even personally I can’t guarantee my data will be with me 20 years from now even though I back it up. If you care about a photo or document, print it and throw it it a box. As I get older I find more of an obsession with physical media from a preservation point of view. Because I know my books and pictures will be around 50 years from now. Digital files not so much.
I used to think this, but now, less so.
I agree with you in general, as most people don't use physical media. However, those of us that do, are probably pretty secure in our legacy.
I have digital files that have been with me for over a quarter of a century, first through repeated copies to new media formats, then to more sophisticated backup systems. In the past few years, I've been alternating backing up to cloud services and then to local USB disks; the backup program is a statically compiled, monolithic program with few dependencies. Recently, I found a solution to the encrypted restore by survivors. I even have a README with instructions.
I'm secure in the knowledge that my 3TB of painstakingly curated collection of foot porn will be available to future researchers, for the betterment of mankind.
Thank you for your service !
We're in the presence of greatness 🫡
Redundancy. I have 4 drives and the older two drives are always a backup of music and media. I can lose all the save games and softwares since they'll be outdated anyways but memories need to be preserved.
The kind of media I don't have backup of is from my Handycam tapes since they no longer make the software and I don't know how to digitize them in any other way.
The kind of media I don’t have backup of is from my Handycam tapes since they no longer make the software and I don’t know how to digitize them in any other way.
Do this if desperate, but see below first:
Magnetic tape cassettes? Are they standard? Then just stick them in an audio player and record the signal— Or actually, they're probably 8mm, or DV, or something— So then rip the reader head out of an audio player, scroll through the tape at a constant rate, and digitize that signal (for as many tracks as needed). Don't do anything silly, like using too much force or sticking too strong a magnet next to them, of course. As long as you've got the signal, you can worry about decoding it later if you lose the originals— Get some nerdy college student to figure it out, or wait for someone else with the same problem to post their GIT repository.Easier: Check if the Internet Archive has a copy of the software. It looks like they have quite a few Sony Handycam CDROMs. Maybe you'll find a compatible model. Run it on an old Windows VM or computer if you need. "No longer make the software" sounds odd; Software like that is made once and then distributed.
(Or: Presumably you can still watch the tapes? Does the camera not have video output that you pass through some sort of capture box? — Though that of course would be lossy.)
Or: Wikipedia suggests the "Handycam" brand was used for multiple format standards, like "Video8" or "Hi8" or whatever. So just search Nile.com (or your personal favourite exploitation-powered online storefront) for "NameOfFormat Digitizer", and wait for the order to to arrive. Here's a couple articles from the first search results: IndieWire, VHSConverters. Here's a machine that supports a couple formats, and has licensed a very reputable brand KodakPhotoPlus. And here's a service that will apparently do it for you: LegacyBox. — Pricey, maybe, but how much time and money are you already spending, and how much are the tapes worth to you?
Thanks, i think the archive + vm would work. What I meant was there's no modern software that supports current gen OS.
I'm not in the US so legacy box is out, thanks for sharing. I finally found a way
I’ve been telling people for years that the entire 21st century is at risk of being a lost century. Even personally I can’t guarantee my data will be with me 20 years from now even though I back it up. If you care about a photo or document, print it and throw it it a box. As I get older I find more of an obsession with physical media from a preservation point of view. Because I know my books and pictures will be around 50 years from now. Digital files not so much.
LOCKSS and KISS, though. Flash chips don't last forever but are pretty durable, and so are optical media as long as they're the right material. SSDs decay and HDDs fail, but for magnetic platter media even if the head or motor crashes there's always the old magnetic microscope in a pinch. USB's not going anywhere, and if you have four or five copies that you don't completely neglect and don't store in the same physical place, presumably you'll have the chance to notice and take corrective measures if any of them start failing or are at risk.
I don't actually know that an individual book or picture will still be around in 50 years; Fire, flooding, insects, acidic paper, low-quality ink maybe— Digital stuff's fragile, but so is physical stuff. Stick it in the attic, and the heat'll speed up any chemical reactions and probably make it cozier for insects; Stick it in the basement, and the condensation will get you mildew and rot. By contrast, having a flash drive accidentally survive a trip through a washer and dryer is a pretty common occurrence, and I've yet to lose a drive even with that level of negligence. Material compatibility's one of the very most basic parts of a set of very precise manufacturing techniques, tin whiskers seem pretty rare these days, the really scarily insidious stuff like hydrogen embrittlement is super improbable, and most biological forms of decay haven't adapted to eating cured epoxy and monocrystalline silicon yet.
At least I sorta know how a flash cell or hard drive platter is meant to be structured; Who knows what weird organic reactions and unstable or slowly diffusing molecules are happening in the pile of chemical pigments on a sheet of likely-acidic bleached cellulose and cheap ink or toner, and whether it will still be legible to human eyes in however many years? Plus, a printed photo or document starts fading the very instant it's created, and it gets a little worse every time you touch it with sweaty human hands or look at it while exhaling moist human breath and corrosive enzymatic saliva droplets under a white LED lamp or G-type star shooting out ionizing UV rays. Digital failures tend to be catastrophic, but at least up until the moment it fails, you can make sure that it is the exact same picture or text— And you can make many, many copies very cheaply, all of them very physically durable compared to paper, and know that they are all the exact same picture and text.
That said, I absolutely agree with your overall assessment that most of the information in the early 21st century, including most of the public Internet/WWW, most likely either will be or already is… Maybe not technically lost, per se, given how much caching and saving happens on private clients, but certainly rendered inaccessible.
Ideally I'd really love to see a return of microfiche, actually, using modern polymers and metallization. I've been meaning to look into that for a while now. At a reasonable scale for optical viewing, you could fit… much, much more content than you might expect, and do it several times over, in an entirely reasonable number of pages. Your comment actually spurred me to finally think of a practical way of printing that— for years before, I'd been trying to idly figure out a process based on photomasks and nanoparticles suspended in resin, which had always felt like a very messy and tricky idea, but I just thought of another idea– So thanks for providing some inspiration there.
This is a hot take