I'm trying to lspci > /sdc1 lspci.txt on recovery mode. What am I doing wrong? + help installing broadcom BCM4360 802.11ac network controller on debian
hardware is a nuked MacBook Pro, Intel Core i5-4278U @ 2.60GHz, model A1502 (EMC 2875), Retina Mid-2014 13"
I tried to install debian 12.5 from a live usb on this computer. On the network page of debian's installation GUI I get this message:
No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list.
so I logged in to recovery mode and executed
sudo lspci -vnnk -s 03:00.0
that returns
network controller [0200]: broadcom inc. and subsidiaries BCM4360 802.11ac wireless network manager adapter [14e4:43a0] (rev 03)
there is more information that I wanted to save to a lspci.txt file on the live usb (sdc1) to share with you, but I failed the syntax.
Why I want to do this: installing debian, on the GUI's networking page there is a candidate with this exact specification (broadcom 802.11ac wireless network manager), but I cannot install it because I don't have wifi or an ethernet cable, so I'd have to download this package from this computer I'm using now and copy it to the live usb to install alongside debian 12.5. I just wanted to print the whole command just in case it's helpful.
As the unfortunate owner of a same-gen MBP with the same wireless card, you're looking at using the proprietary driver (I at least never had any luck with the open-source ones). Luckily, Debian do support those, and even have wiki page for them: https://wiki.debian.org/wl
Does require some extra configuration though. If you happen to have a Android phone, you should be able to use that for USB-tethering to have internet access on the device you're installing on, will make the process a lot easier (you don't even need a SIM in it, you can tether your wifi, that's what I ended up doing 😅).